Abstract
Complex reaction kinetics and mechanisms, physical changes and transport effects, non-ideal mixing, and strong process nonlinearity characterize polymerization processes. Polymer reaction engineering is a discipline that deals with various problems concerning the fundamental nature of chemical and physical phenomena in polymerization processes. Mathematical modeling is a powerful tool for the development of process understanding and advanced reactor technology in the polymer industry. This review discusses recent developments in modeling techniques for the calculation of polymer properties including molecular weight distribution, copolymer composition distribution, sequence length distribution and long chain branching. The application of process models to the design of model-based reactor optimizations and controls is also discussed with some examples.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
Anantawaraskul, S., Soares, J. B. P. and Wood-Adams, P.M., “Chemical Composition Distribution of Multicomponent Random Copolymers,” Paper presented at Polymer Reaction Engineering V, Quebec, Canada, May (2003).
Arzamendi, G. and Asua, J.M., “Modeling Gelation and Sol Molecular Weight Distribution in Emulsion Polymerization,”Macromolecules,28, 7479 (1995).
Bergström, C.H., Sperlich, B. R., RuotoistenmÄki, J. and SeppÄlÄ, J.V., “Investigation of the Microstructure of Metallocene-catalyzed Norbornene-ethylene Copolymers Using NMR Spectroscopy,”J. Polym. Sci.: Part A: Polym. Chem.,36, 1633 (1998).
Bon, S.A. F., Bosveld, M., Klumperman, B. and German, A. L., “Controlled Radical Polymerization in Emulsion,”Macromolecules,30, 324 (1997).
Bouzid, D. and McKenna, T. F., “Evolution of Particle Morphology During the Production of High Impact Polypropylene,” Paper presented at Polymer Reaction Engineering V, Quebec, Canada, May (2003).
de Brouwer, H., Tsavalas, J.G., Schork, F. J. and Monteiro, M. J., “Living Radical Polymerization in Miniemulsion Using Reversible Addition fragmentation Chain Transfer,”Macromolecules,33, 9239 (2000).
Butala, D.N., Fan, M.K.H. and Choi, K.Y., “Multiobjective Dynamic Optimization of Semibatch Free Radical Copolymerization Process with Interactive CAD Tools,”Comp. Chem. Eng., 12(11), 1115 (1988).
Butala, D. N., Liang, W. R. and Choi, K.Y., “Multiobjective Dynamic Optimization of Batch Free Radical Polymerization Process by Mixed Initiator Systems,”J. Appl. Polym. Sci.,44, 1759 (1992).
Butté, A., Ghielmi, A., Storti, G. and Morbidelli, M., “Calculation of Molecular Weight Distributions in Free-radical Polymerization with Chain Branching,”Macromol. Theory Simul.,8, 498 (1999a).
Butté, A., Storti, G. and Morbidelli, M., “Kinetics of Living Free Radical Polymerization,”Chem. Eng. Sci.,54, 3225 (1999b).
Butté, A., Storti, G. and Morbidelli, M., “Miniemulsion Living Free Radical Polymerization of Styrene,”Macromolecules,33, 3485 (2000).
Carrot, C. and Guillet, J., “From Dynamic Moduli to Molecular Weight Distribution: A Study of vArious Polydisperse Linear Polymers,”J. Rheol., 41(5), 1203 (1997).
Chatzidoukas, C., Perkins, J. D., Pistikopoulos, E.N. and Kiparissides, C., “Optimal Grade Transition and Selection of Closed-loop Controllers in a Gas-phase Olefin Polymerization Fluidized Bed Reactor,”Chem. Eng. Sci.,58, 3643 (2003).
Chen, C. C., “An Industry Perspective on Polymer Process Modeling,”CAST Communications, Summer (2002) [www.castdiv.org/summer02. htm].
Chien, D. C.H. and Penlidis, A., “On-line Sensors for Polymerization Reactors,”JMS-Rev. Macromol. Chem. Phys., C30(1), 1 (1990).
Choi, K.Y., “Modeling of Polymerization Processes,” in Computer-Aided Design of Catalysts; Becker, E. R., Pereira, C. J., Eds., 335, Marcel Dekker, New York (1993).
Choi, K.Y. and Ray, W.H., “The Dynamic Behavior of Fluidized Bed Reactors for Solid Catalyzed Gas Phase Olefin Polymerization,”Chem. Eng. Sci., 40(12), 2261 (1985).
Choi, K.Y. and Ray, W.H., “The Dynamic Behavior of Continuous Stirred Bed Reactors for the Solid Catalyzed Gas Phase Polymerization of Propylene,”Chem. Eng. Sci., 43(10), 2587 (1986).
Chum, S. and Oswald, T., “Using Polymer Structure/property Models to Accelerate the Development of Industrially Significant Applications for Polyolefins,” Paper presented at Polymer Reaction Engineering V, Quebec, Canada, May (2003).
Chum, P. S., Kao, C. I. and Knight, G.W., “Structure and Properties of Polyolefin Plastomers and Elastomers Produced from the Single Site, Constrained Geometry Catalyst,” Paper presented at Polyolefins IX, Houston, TX (1995).
Congalidis, J. P., Richards, J.R. and Ray, W.H., “Feedforward and Feedback Control of a Solution Copolymerization Reactor,”AIChE J.,35(6), 891 (1989).
Congalidis, J. P. and Richards, J. R., “Process Control of Polymerization Reactors: An Industrial Perspective,”Polym. React. Eng., 6(2), 71 (1998).
Crowley, T. and Choi, K.Y., “Calculation of Molecular Weight Distribution from Molecular Weight Moments in Free Radical Polymerization,”Ind. Eng. Chem. Res.,36, 1419 (1997a).
Crowley, T. and Choi, K.Y., “Discrete Optimal Control of Molecular Weight Distribution in a Batch Free Radical Polymerization Process,”Ind. Eng. Chem. Res.,36, 3676 (1997b).
Crowley, T. and Choi, K.Y., “Control of Molecular Weight Distribution and Tensile Strength in a Free Radical Styrene Polymerization Process,”J. Appl. Polym. Sci.,70, 1017 (1998a).
Crowley, T. and Choi, K. Y., “Experimental Studies on Optimal Molecular Weight Distribution Control in a Batch Free Radical Polymerization Process,”Chem. Eng. Sci., 53(15), 2769 (1998b).
Crowley, T. and Choi, K.Y., “Copolymer Hydrodynamic Volume Distribution in a Free Radical Copolymerization Process,”Polym. React. Eng., 7(1), 43 (1999a).
Crowley, T. J. and Choi, K.Y., “Control of Copolymer Hydrodynamic Volume Distribution in Free Radical Copolymerization Process,”Comp. Chem. Eng.,23, 1153 (1999b).
Cunningham, M. F., “Living/Controlled Radical Polymerizations in Dispersed Phase Systems,”Prog. Polym. Sci.,27, 1039 (2002).
Debling, J. A., Han, G. C., Kuijpers, J., VerBurg, J., Zacca, J. and Ray, W.H., “Dynamic Modeling of Product Grade Transitions for Olefin Polymerization Processes,”AIChE J.,40, 506 (1994).
Dotson, N.A., Galvan, R., Laurence, R. L. and Tirrell, M., “Polymerization Process Modeling,” VCH Publishers, New York (1996).
Doyle III, F. J., Soroush, M. and Cordeiro, C., “Control of Product Quality in Polymerization Processes,”AIChE Symp. Ser.,98, 290 (2002).
Dubé, M. A., Soares, B. P. O., Penlidis, A. and Hamielec, A. E., “Mathematical Modeling of Multicomponent Chain-growth Polymerizations in Batch, Semibatch, and Continuous Reactors: A Review,”Ind. Eng. Chem. Res.,36, 966 (1997).
Flores-Cerrillo, J. and MacGregor, J. F., “Within-batch and Batch-tobatch Inferential-adaptive Control of Semibatch Reactors: A Partial Least Square Approach,”Ind. Eng. Chem. Res.,42, 3334 (2003).
Floyd, S., Choi, K.Y., Taylor, T.W. and Ray, W.H., “Polymerization of Olefins Through Heterogeneous Catalysis. IV. Modeling of Heat and Mass Transfer Resistance in the Polymer Particle Boundary Layer,”J. Appl. Polym. Sci.,31, 2231 (1986).
Floyd, S., Heiskanen, T., Taylor, T.W. and Ray, W. H., “Polymerization of Olefins Through Heterogeneous Catalysis. VI. Effect of Particle Heat and Mass Transfer on Polymerization Behavior and Polymer Properties,”J. Appl. Polym. Sci.,33, 1021 (1987).
Georges, M. K., Veregin, R. P. N., Kazmaier, P.M. and Hamer, G.K., “Narrow Molecular Weight Resins by a Free-radical Polymerization Process,”Macromolecules,26, 2987 (1993).
Goldwasser, J. M., Rudin, A. and Elsdon, W. L., “Characterization of Copolymers and Polymer Mixtures by Gel Permeation Chromatography,”J. Liquid Chromatogr.,5, 2253 (1982).
Goldwasser, J.M. and Rudin, A., “Analysis of Block and Statistical Copolymers by Gel Permeation Chromatography: Estimation of Mark-Houwink Constants,”J. Liquid Chromatogr.,6, 2433 (1983).
Grof, Z., Kosek, J., Marek, M. and Adler, P. M., “Modeling of Morphogenesis of Polyolefin Particles: Catalyst Fragmentation,”AIChE J., 49(4), 1002 (2003).
Guan, Z., Chen, G. and Ma, S.X. S., “Control of Polymer Topology through Transition Metal Catalysis: Synthesis of Functional Olefin Copolymers Using a Chain Walking Catalyst,”Polymer Preprints, 44(2), 14 (2003).
Han, C. D. and Kwack, T.H., “Rheology-processing-property Relationships in Tubular Blown Film Extrusion. I. High-pressure Lowdensity Polyethylene,”J. Appl. Polym. Sci.,28, 3399 (1983).
Han, C.D., Kim, Y. J., Chuang, H.K. and Kwack, T.H., “Rheological Properties of Branched Low-density Polyethylene,”J. Appl. Polym. Sci.,28, 3435 (1983b).
Hölderle, M., Baumert, M. and Mülhaupt, R., “Comparison of Controlled Radical Styrene Polymerizations in Bulk and Nonaqueous Dispersion,”Macromolecules,30, 3420 (1997).
Hutchinson, R.A. and Ray, W.H., “Polymerization of Olefins through Heterogeneous Catalysis. VII. Particle Ignition and Extinction Phenomena,”J. Appl. Polym. Sci.,34, 657 (1987).
Jeong, B.G., Yoo, K.Y. and Rhee, H. K., “Nonlinear Model Predictive Control Using a Wiener Model of a Continuous Methyl Methacrylate Polymerization Reactor,”Ind. Eng. Chem. Res., 40(25), 5968 (2001).
Keil, K., “The Use of High Throughput Screening Tools in Polymer Reaction Engineering,” Paper presented at Polymer Reaction Engineering V, Quebec, Canada, May (2003).
Kim, K. J. and Choi, K.Y., “On-line Estimation and Control of a Continuous Stirred Tank Polymerization Reactor,”J. Proc. Control.,1, 96 (1991).
Kim, K. J., Choi, K. Y. and Alexander, J. C., “Dynamics of a CSTR for Styrene Polymerization Initiated by a Binary Initiator System,”Polym. Eng. Sci.,30(5), 279 (1990).
Kim, K. J., Choi, K.Y. and Alexander, J. C., “Dynamics of a Cascade of Two Continuous Stirred Tank Polymerization Reactors with a Binary Initiator Mixture,”Polym. Eng. Sci.,31(5), 333 (1991).
Kim, K. J., Choi, K. Y. and Alexander, J. C., “Dynamics of a CSTR for Styrene Polymerization Initiated by a Binary Initiator Mixture. II. Effect of Viscosity Dependent Heat Transfer Coefficient,”Polym. Eng. Sci.,32(7), 494 (1992).
Kim, J. D., Soares, J. B. P. and Rempel, G. L., “Synthesis of Tailor-made Polyethylene through the Control of Polymerization Conditions Using Selectively Combined Metallocene Catalysts in a Supported System,”J. Polym. Sci.: Part A: Polym. Chem.,37, 331 (1999).
Kiparissdes, C., “Polymerization Reactor Modeling: A Review of Recent Developments and Future Directions,”Chem. Eng. Sci., 51(10), 1637 (1996).
Kittilsen, P., McKenna, T. and Svendsen, H., “The Interaction Between Mass Transfer Effects and Morphology in Heterogeneous Olefin Polymerization,” Paper presented at the first Eur. Conf. on React. Eng. of Polyolefins, Lyon, France, July (2000).
Kosek, J., Grof, Z., Salejova, G. and Marek, G., “Modeling of the Morphogenesis of Polyolefin Particles in Catalytic Reactors,” Paper presented at Polymer Reaction Engineering V, Quebec, Canada, May (2003).
Lavallée, C. and Berker, A., “More on the Prediction of Molecular weight Predictions of Linear Polymers from Their Rheology,”J. Rheol., 41(4), 851 (1997).
Matyjaszewski, K., Patten, T. E. and Xia, J., “Controlled/living Radical Polymerization. Kinetics of the Homogeneous Atom Transfer Radical Polymerization of Styrene,”J. Am. Chem. Soc.,119, 674 (1997).
McAuley, K. B. and MacGregor, J. F., “Optimal Grade Transition in a Gas Phase Polyethylene Reactor,”AIChE J.,38, 1564 (1992).
McKenna, T. F., Spitz, R., Kittilsen, P., Mattioli, V. and Martin, C., “Single Particle Transfer Phenomena: A Review and Future Directions,” ECOREP, Lyon, France, July (2000).
Ogunnaike, B.A., “The Role of CACSD in Contemporary Industrial Process Control,”IEEE Control Systems, April, 41 (1995).
Papavasiliou, G., Birol, I. and Teymour, F., “Calculation of Molecular weight Distributions in Non-linear Free-radical Polymerization Using the Numerical Fractionation Technique,”Macromol. Theory Simul.,11, 533 (2002).
Park, M. J. and Rhee, H.K., “Property Evaluation and Control in a Semibatch MMA/MA Solution Copolymerization Reactor,”Chem. Eng. Sci.,58, 603 (2003).
Park, S.Y., Choi, K.Y., Song, K.H. and Jeong, B.G., “Kinetic Modeling of Ethylene-norbornene Copolymerization Using Homogeneous Metallocene Catalysts,”Macromolecules,36, 4216 (2003).
Park, S.Y., “A Study on the Kinetics of Ethylene-norbornene Copolymerization over Homogeneous Metallocene Catalysts,” Ph.D. Thesis, University of Maryland, College Park (2003).
Peterson, T., Hernandez, E., Arkun, Y. and Schork, F. J., “A Nonlinear DMC Algorithm and its Application to a Semibatch Polymerization Reactor,”Chem. Eng. Sci., 47(737)1992).
Pladis, P. and Kiparissides, C., “A Comprehensive Model for the Calculation of Molecular Weight-long-chain Branching Distribution in Free-radical Polymerizations,”Chem. Eng. Sci., 53(18), 3315 (1998).
Ray, W. H., “On the Mathematical Modeling of Polymerization Reactors,”J. Macromol. Sci. Rev. Macromolecular Chem. Phys.,C8, 1 (1972).
Scali, C., Ciari, R., Bello, T. and Maschio, G., “Optimal Temperature for the Control of the Product Quality in Batch Polymerization: Simulation and Experimental Results,”J. Appl. Polym. Sci.,55, 945 (1995).
Schork, F. J., Desphande, P. B., Leffew, K.W., “Control of Polymerization Reactors,” Marcel Dekker, New York (1993).
Seki, H., Ogawa, M., Ooyama, S., Akamatsu, K., Ohshima, M. and Yang, W., “Industrial Application of a Nonlinear Model Predictive Control to Polymerization Reactors,”Control Eng. Practice,9(8), 819 (2001).
Sirohi, A. and Choi, K. Y., “On-line Parameter Estimation in a Continuous Polymerization Process,”Ind. Eng. Chem. Res.,35, 1332 (1996).
Soares, J. B. P. and Hamielec, A. E., “Temperature Rising Elution Fractionation of Linear Polyolefins,”Polymer,36(8), 1639 (1995a).
Soares, J. B. P. and Hamielec, A. E., “Analyzing TREF Data by Stockmayer’s Bivariate Distribution,”Macromol. Theory Simul.,4, 305 (1995b).
Soares, J. B. P. and Hamielec, A. E., “Bivariate Chain Length and Long Chain Branching Distribution for Copolymerization of Olefins and Polyolefin Chains Containing Terminal Double Bonds,”Macromol. Theory Simul.,5, 547 (1996).
Soares, J. B. P. and Hamielec, A. E., “The Chemical Composition Component of the Distribution of Chain Length and Long Chain Branching for Copolymerization of Olefins and Polyolefin Chains Containing Terminal Double Bonds,”Macromol. Theory Simul.,6, 591 (1997a).
Soares, J. B. P., Kim, J. D. and Rempel, G., “Analysis and Control of the Molecular Weight and Chemical Composition Distributions of Polyolefins Made with Metallocene and Ziegler-Natta Catalysts,”Ind. Eng. Chem. Res.,36, 1144 (1997b).
Teymour, F. and Campbell, J.D., “Analysis of the Dynamics of Gelation in Polymerization Reactors Using the Numerical Fractionation Technique,”Macromolecules,27, 2460 (1994).
Teymour, F., “The Use of Digital Encoding for Modeling Copolymerization Systems,” Paper presented at Polymer Reaction Engineering V, Quebec, Canada (2003).
Tritto, I., Boggioni, L., Jansen, J., Thorshaug, K., Sacchi, M. C. and Ferro, D. R., “Ethylene-norbornene Copolymer Microstructure at Tetrad Level: Advances in Assignments of 13C NMR Spectra and Insights on Polymerization Mechanisms,” Paper presented at Int. Symp. on Polyolefins and Olefin Polymerization Catalysis, Tokyo, Japan, March 21–24 (2001).
Tritto, I., Boggioni, L., Jansen, J. C., Thorshaug, K., Sacchi, M. C. and Ferro, D. R., “Ethylene-norbornene Copolymers from Metallocenebased Catalysts: Microstructure at Tetrad Level and Reactivity Ratios,”Macromolecules,35, 616 (2002).
Tullo, A. H., “Single-site Success,”Chem. & Eng. News, 79(43), 35 (2001).
Wang, Y., Seki, H., Ohyama, S., Akamatsu, K., Ogawa, M. and Ohshima, M., “Optimal Grade Transition Control for Polymerization Reactors,”Comp. & Chem. Eng.,24, 1555 (2000).
Weng, W., Market, E. J., Dekmezian, A.H. and Ruff, C. J., “Long Chain Branched Isotactic Polypropylene,”Macromolecules,35(10), 3838 (2002).
Weng, W., Hu, W. and Dekmezian, A. H., “Structure and Property of Long Chain Branched Isotactic Polypropylene,”Polymer Preprints, 44(2), 17 (2003).
Wulkow, M., “The Simulation of Molecular Weight Distributions in Polyreaction Kinetics by Discrete Galerkin Methods,”Macromol. Theory Simul.,5, 393 (1996).
Wulkow, M., (Computer in Technology, http://www.cit-wulkow.de/), personal communication (2003).
Yiannoulakis, H., Yiagopoulos, A., Pladis, P. and Kiparissides, C., “Comprehensive Dynamic Model for the Calculation of the Molecular weight and Long Chain Branching Distributions in Metallocene-catalyzed Ethylene Polymerization Reactors,”Macromolecules,33, 2757 (2000).
Yoon, W. J., Ryu, J.H., Cheong, C. and Choi, K.Y., “Calculation of Molecular Weight Distribution in a Batch Thermal Polymerization of Styrene,”Macromol. Theory Simul.,7, 327 (1998).
Yoon, W. J., “Modeling of Industrial Styrene Polymerization Process,” unpublished work (2003).
Young, R. E., Bartusiak, R.D. and Fontaine, R.W., “Evolution of an Industrial Nonlinear Model Predictive Controller,”AIChE Symp. Ser.,98, 342 (2002).
Zhang, M. and Ray, W.H., “Modeling of Living Free Radical Polymerization Processes. I. Batch, Semibatch, and Continuous Tank Reactors,”J. Appl. Polym. Sci.,86, 1630 (2002).
Zhu, S. and Li, D., “Molecular weight Distribution of Metallocene Polymerization with Long Chain Branching Using a Binary Catalyst System,”Macromol. Theory Simul.,6, 793 (1997).
Author information
Authors and Affiliations
Corresponding author
Additional information
This paper is dedicated to Professor Hyun-Ku Rhee on the occasion of his retirement from Seoul National University.
Rights and permissions
About this article
Cite this article
Yoon, W.J., Kim, Y.S., Kim, I.S. et al. Recent advances in polymer reaction engineering: Modeling and control of polymer properties. Korean J. Chem. Eng. 21, 147–167 (2004). https://doi.org/10.1007/BF02705393
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF02705393