Abstract
The effect of an air distributor on the fluidization characteristics of 1 mm glass beads has been determined in a conical gas fluidized bed (0.1 m-inlet diameter and 0.6 m in height) with an apex angle of 20‡. To determine the effect of distributor geometry, five different perforated distributors were employed (the opening fraction of 0.009–0.037, different hole size, and number). The differential bed pressure drop increases with increasing gas velocity, and it goes from zero to a maximum value with increasing or decreasing gas velocity. From the differential bed pressure drop profiles with the distributors having different opening fractions, demarcation velocities of the minimum and maximum velocities of the partial fluidization, full fluidization, partial defluidization and the full defluidization are determined. Also, bubble frequencies in the conical gas fluidized beds were measured by an optical probe. In the conical bed, the gas velocity at which the maximum bed pressure drop attained increases with increasing the opening fraction of distributors.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Bilbaro, J., Olazar, M., Romero, A. and Arandes, J. M., “Design and Operation of a Jet Spouted Bed Reactor with Continuous Catalyst Feed in the Benzyl Alcohol Polymerization,”Ind. Engng. Chem. Res.,26, 1297 (1987).
Boldt, J. R. Jr., “The Winning of Nickel-Its Geology, Mining and Extractive Metallurgy,” Longmans Canada Ltd. Figures Inset, 320 (1967).
Chen, Y., Wu, R. and Mori, S., “Development of a New Type of Thermogravimetric Analyzer with a Mini-tapered Fluidized Bed. Effect of Fluidization of Particles on the Stability of the System,”Chem. Engng. J.,68, 7 (1997).
Davidson, J. F. and Harrison, D.,Fluidization, Academic press, New York, 27 (1971).
Inami, H., Saito, M., Mochizuki, M., Sato, K. and Akehata, T., “Modeling for Gasification of Polyethylene by Partial Combustion in Fluidized bed with Conical Gas Distributor,”Kagaku Kogaku Ronbunshu,26, 588 (2000).
Kmiec, A., “The Minimum Spouting Velocity in Conical Beds,”Can. J. Chem. Eng.,61, 274 (1983).
Kunii, D. and Levenspiel, O.,Fluidization Engineering, Butterworth-Heinemann, Boston, 61 (1991).
Kwauk, M.,Fluidization-Idealized and Bubbleless with Applications, Science Press and Ellis Horwood, Beijing, 91 (1992).
Nishi, Y., “Some Considerations on Pressure Drop and Minimum Fluidizing Velocity of Tapered Fluidized Bed,”Kagaku Kogaku Ronbunshu,5, 202 (1979).
Olazar, M., San Jose, M. J., Penas, F. J., Aguayo, A. T., Arandes, J.M. and Bilbao, J., “A Simplified Model for Gas Flow in Conical Spouted Beds,”Chem. Engng. J.,56, 19 (1995).
Peng, Y. and Fan, L. T., “Hydrodynamic Characteristics of Fluidization in Liquid-Solid Tapered Beds,”Chem. Eng. Sci.,52, 2277 (1997).
Peng, Y. and Fan, L. T., “Hysteresis in Liquid-Solid Tapered Fluidized Beds,”Chem. Eng. Sci.,50, 2669 (1995).
San Jose, M. J., Olazar, M., Penas, F. J., Arandes, J. M. and Bilbao, J., “Correlation for Calculation of the Gas Distribution Coefficient in Conical Spouted Beds,”Chem. Eng. Sci.,50, 2161 (1995).
Shi, Y.-F., Yu, Y. S. and Fan, L. T., “Incipient Fluidization Condition for a Tapered Fluidized Bed,”Ind. Eng. Chem. Fundam.,23, 484 (1984).
Tanfara, H., Pugsley, T. and Winters, C., “Effect of Particle Size Distribution on Local Voidage in a Bench-Scale Conical Fluidized Bed Dryer,”Drying Technology,20, 1273 (2002).
Toyohara, H. and Kawamura, Y., “Circulation of Particles in the Side Regions of a Tapered Fluidized Bed,”Int. Chem. Eng.,33, 525 (1993).
Toyohara, H. and Kawamura, Y., “Fluidization Characteristics of Tapered Bed,”Kakagu Kogaku Ronbunshu,15, 773 (1989).
Tsuji, T., Shibata, T., Yamaguchi, K. and Uemaki, O., “Mathematical Modeling of Spouted Bed Coal Gasification,” Proceedings of the International Conference on Coal Science, Tokyo, 457 (1989).
Uemaki, O. and Tsuji, T.,Gasification of a Sub-bituminous Coal in a Two-stage Jet Spouted Bed Reactor, Fluidization V., Ostergaard K. and Sorensen, A., eds., Engineering Foundation, New York, 497 (1986).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Son, SY., Lee, D.H., Han, G.Y. et al. Effect of air distributor on the fluidization characteristics in conical gas fluidized beds. Korean J. Chem. Eng. 22, 315–320 (2005). https://doi.org/10.1007/BF02701503
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF02701503