Abstract
In this study we propose a method to identify the kinetics of direction esterification reactions for polyethylene terephthalate (PET) based on a genetic algorithm. The reaction rate parameters could be identified successfully by using a genetic algorithm and plant data. The effects of key operating variables (temperature, pressure, monomer feed ratio and residence time) on the reactor performance were also investigated. It was observed that the reactor performance strongly depends on the degree of dissolution of the solid terephthalic acid (TPA) in the reaction mixtures.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Bhaskar, V., Gupta, S. K. and Ray, A. K., “Simulation of an Industrial Finishing-Stage Polycondensation Reactor in the Poly(ethylene terephthalate) Manufacture”, The 8 APCChE Congress, Seoul, Korea, 59 (1999).
Besnoin, J. M. and Choi, K. Y., “Identification and Characterization of Reaction Byproducts in the Polymerization of Polyethylene Terephthalate”,J. Macromol. Sci. Rev. Macromol. Chem. Phys.,29(1), 55 (1989).
Davis, L., “Genetic Algorithms and Simulated Annealing, Morgan Kaufmann”, Morgan Kaufmann, San Mateo, CA (1987).
Deb, K., “Optimization for Engineering Design: Algorithms and Examples”, Prentice-Hall of India, New Delhi (1996).
Flory, P. J., “Principles of Polymer Chemistry”, 1st ed., Cornell University Press, Ithaca, New York (1953).
Goldberg, D. E., “Genetic Algorithms in Search, Optimization and Machine Learning”, Addison-Wesley, Reading, MA (1989).
Harris, S. D., Elliott, L., Ingham, D. B., Pourkashanian, M. and Wilson, C. W., “The Optimization of Reaction Rate Parameters for Chemical Kinetic Modeling of Combustion using Genetic Algorithms”,Comput. Methods. Appl. Mech. Engrg.,190, 1065 (2000).
Holland, J. H., “Adaptation in Natural and Artificial Systems,” University of Michigan Press, Ann Arbor (1975).
Hovenkamp, S. G. and Munting, J. P., “Formation of Diethylene Glycol as a Side Reaction during Production of Polyethylene of Polyethylene Terephthalate”,J. Polym. Sci. Part A-1,8, 679 (1970).
Immanuel, C. D. and Gupta, S. K., “Optimization of the First Stage Continuous Reactor-Sequence in Polyester Manufacture from Purified Terephthalic Acid”,J. Polym. Eng.,20(1), 51 (2000).
Kang, C. K., Lee, B. C, Him, D. W. and Tremblay, D. A., “A Simulation Study on Continuous Direct Esterification Process for Polyethylene terephthalate) Synthesis”,J. Appl. Polym. Sci.,63,163 (1997).
Krevelen, D. W. van., “Properties of Polymers”, Elsevier, New York, 3rd ed., 109 (1990).
Kumar, A., Sharma, S. N. and Gupta, S. K., “Optimization of the Polycondensation Stage of Poly(ethylene terephthalate) Reactors,”J. Appl. Polym. Sci.,29,1045 (1984).
Michalewicz, Z., “Genetic Algorithms+Data Structures=Evolution Programs”, Springer, Berlin, 3rd ed. (1996).
Otton, J. and Ratton, S., “Investigation of the Formation of Polyethylene terephthalate) with Model Molecule: Kinetics and Mechanism of the Catalytic Esterification and Alcoholysis Reactions,”J. Polym. Sci.,26, 2183 (1998).
Park, T. Y. and Froment, G. E., “A Hybrid Genetic Algorithm for the Estimation of Parameters in Detailed Kinetic Models,”Comp. Chem. Eng.,22, s103 (1998).
Polifke, W., Geng, W. and Dobbeling, K., “Optimization of Rate Coefficients for Simplified Reaction Mechanisms with Genetic Algorithms,”Combustion and Flame,113,119 (1998).
Ravindranath, K. and Mashelkar, B. A., “Modeling of Poly(ethylene terephthalate) Reactors: 4. A Continuous Esterification Process,”Polym. Eng. and Set,22(10), 610 (1982).
Ravindranath, K. and Mashelkar, B. A., “Polyethylene Terephthalate I. Chemistry, Thermodynamics and Transport Properties,”Chem. Eng. Sci.,41(9), 2197 (1986).
Reimschuessel, H. K., Debona, B. T. and Murthy, A. K. S., “Kinetics and Mechanism of the Formation of Glycol Esters: Benzoic Acid-Ethylene Glycol System,”J. Polym. Sci.,17, 3217 (1979).
Yamada, T., “A Mathematical Model for a Continuous Esterification Process with Recycle Between Terephthalic Acid and Ethylene Glycol,”J. Appl. Polym. Sci.,45,1919 (1992).
Yamada, T., Imamura, Y. and Makimura, O., “A Mathematical Model for Computer Simulation of a Direct Continuous Esterification Process Between Terephthalic Acid and Ethylene Glycol: Part 1. Model Development,”Polym. Eng. and Sci.,25(12), 788 (1985).
Yeo, Y K., Cho, H. J., Park, W. H. and Moon, B. K., “Modeling and Simulation of a Wet Hemihydrate Phosphoric Acid Process,”Korean J. Chem. Eng.,13, 585 (1996).
Yeo, Y K., Choo, J. O., Kim, M. K., Kim, K. S. and Chang, K. S., “Modeling and Simulation of a Sulfolane Extraction Process,”Korean J. Chem. Eng,15,90 (1998).
Wolf, D. and Moros, R., “Estimating Rate Constants of Heterogeneous Catalytic Reactions Without Supposition of Rate Determining Surface Steps-An Application of a Genetic Algorithm,”Chem. Eng. Sci.,52(7), 475 (1997).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Kim, JY., Kim, HY. & Yeo, YK. Identification of kinetics of direct esterification reactions for PET synthesis based on a genetic algorithm. Korean J. Chem. Eng. 18, 432–441 (2001). https://doi.org/10.1007/BF02698287
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF02698287