Abstract
Tensile and creep properties were determined on a V-Ti-B-modified 2.25Cr-lMo steel. The modified 2.25Cr-lMo steel had about 0.2 pct V added for improved elevated-temperature strength. Boron was added to improve the hardenability, thus allowing thicker sections to be quenched or normalized to completely bainitic microstructures. Lower carbon and silicon concentrations were used (~0.1 pct C and 0.02 pct Si) than in standard 2.25Cr-lMo steel. The modified steel had substantially better stress-rupture properties than did a standard 2.25Cr-lMo steel (both with bainitic microstructures) with equivalent tensile properties — especially at the lowest stresses and highest temperatures. Comparative transmission electron microscopy studies of the standard and modified 2.25Cr- lMo steels indicated that the differences involved the carbide precipitates and the dislocation substructures present in the steels.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
T. Ishiguro, Y. Murakami, K. Ohnishi, and J. Watanabe: inApplica- tion of 21/4Cr-lMo Steel for Thick-Wall Pressure Vessels, G. S. Sangdahl and M. Semchyshen, eds., ASTM-STP 755, American So- ciety for Testing and Materials, Philadelphia, PA, 1982, pp. 129–47.
R. G. Baker and J. Nutting:J. Iron Steel Inst. (London), 1959, vol. 192, pp. 257–67.
K.W. Andrews, H. Hughes, and D.I. Dyson:J. Iron Steel Inst. (London), 1972, vol. 210, pp. 337–50.
T. Funakoshi, T. Tanaka, S. Veda, M. Ishikawa, N. Koshizaka, and K. Kobayashi:Trans. Iron Steel Inst. Japan, 1977, vol. 17, pp. 426–27.
S. Ueda, M. Ishikawa, A. Kamada, and N. Ohashi:Trans. Iron Steel Inst. Japan, 1980, vol. 20, pp. 765–66.
R.L. Klueh and R.E. Oakes, Ir.:J. Eng. Mater. Technol., 1977, vol. 99, pp. 350–58.
R. L. Klueh:Int. J. Press. Vessels Piping, 1980, vol. 8, pp. 165–85.
R.W.K. Honeycombe:Steels: Microstructure and Properties, Edward Arnold, Ltd., London, 1981, pp. 106–19.
F. B. Pickering:Physical Metallurgy and the Design of Steels, Applied Science Publishers, London, 1978, pp. 101–25.
J.H. Woodhead and A.G. Quarrell:The Role of Carbides in Low-Alloy Creep-Resisting Steels, Climax Molybdenum Company, London, 1965.
L.I. Habraken and M. Economopoulos: inTransformation and Hardenability, Climax Molybdenum Company, Ann Arbor, MI, 1967, pp. 69–107.
R. L. Klueh:J. Nucl. Mater., 1974, vol. 54, pp. 41–54.
I.A. Todd, D. W. Chung, and E. R. Parker: inAdvanced Materials for Pressure Vessel Service with Hydrogen at High Temperatures and Pressures, M. Symchyshen, ed., American Society of Mechanical Engineers, New York, NY, 1982, pp. 179–91.
C.A. Hippsley:Metal Sci., 1981, vol. 15, pp. 137–47.
I. Pilling and N. Ridley:Metall. Trans. A, 1982, vol. 13A, pp. 557–63.
I.D. Baird and A. Lamieson:J. Iron Steel Inst. (London), 1972, vol. 210, pp. 847–56.
R. L. Klueh:Mater. Sci. Eng., 1978, vol. 35, pp. 239–53.
K.I. Irvine, I.D. Murray, and F. B. Pickering: inStructural Processes in Creep, Iron and Steel Institute, London, 1961, pp. 246–75.
R.L. Klueh:Metall. Trans. A, 1978, vol. 9A, pp. 1591–98.
R. L. Klueh:J. Nucl. Mater., 1979, vol. 69, pp. 363–71.
I. Orr, F. R. Beckitt, and G.D. Fawkes: inFerritic Steels for Fast Reactor Steam Generators, British Nuclear Energy Society, London, 1978, pp. 91–109.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Klueh, R.L., Swindeman, R.W. The microstructure and mechanical properties of a modified 2.25Cr-lMo steel. Metall Trans A 17, 1027–1034 (1986). https://doi.org/10.1007/BF02661268
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02661268