Abstract
Computer simulation for three-dimensional convection in moving arc weld pools was described, with three distinct driving forces for flow considered — the electromagnetic force, the buoyancy force, and the surface tension gradient on the pool surface. Formulation of the electromagnetic force in the weld pool was presented. The calculated and experimentally observed fusion boundaries were compared. The arc efficiency and spatial distributions of the current density and power density used in the calculations were based on experimentally measured results, in order to verify the model. The effects of the electromagnetic and surface tension forces were discussed.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
S. Kou and Y. H. Wang:Weld. J., 1986, vol. 65, p. 63s.
G. M. Oreper, T. W. Eagar, and J. Szekely:Weld. J., 1983, vol. 62, p. 307s.
G. M. Oreper and J. Szekely:J. Fluid Mechanics, 1984, vol. 147, p. 53.
C. Chan, J. Mazumder, and M. M. Chen:Metall. Trans. A, 1984, vol. 15A, p. 2175.
S. Kou and D. K. Sun:Metall. Trans. A, 1985, vol. 16A, p. 203.
W. H. S. Lawson and H. W. Kerr:Welding Research International, 1976, vol. 6, p. 1.
M. L. Lin and T. W. Eagar:Weld. J., 1985, vol. 64, p. 163s.
S. Kou and Y. H. Wang:Metall. Trans. A, 1986, vol. 17A, p. 2265.
S. Szekely:Fluid Flow Phenomena in Metals Processing, Academic Press, New York, NY, 1979, p. 178.
W. F. Hughes and F. J. Young:The Electromagnetodynamics of Fluids, John Wiley, New York, NY, 1966, ch. 7.
J. D. Jackson:Classical Electrodynamics, 2nd ed., John Wiley, New York, NY, 1976, ch. 3.
W. H. S. Lawson and H. W. Kerr:Welding Research International, 1976, vol. 6, p. 63.
S. V. Patankar and D. B. Spalding:Int. J. Heat and Mass Transfer, 1972, vol. 15, p. 1787.
S. V. Patankar and D. B. Spalding:Proc. 14th Symp. on Combustion, The Combustion Inst., 1972, p. 605.
L. S. Caretto, A. D. Gosman, S. V. Patankar, and D. B. Spalding:Proc. 3rd Int. Conf. Num. Methods Fluid Dyn., Paris, 1972, vol. II, p. 60.
F. H. Harlow and J. E. Welch:Phys. Fluids, 1965, vol. 8, p. 2182.
L. S. Caretto, R. M. Curr, and D. B. Spalding:Comp. Methods Appl. Mech. Eng., 1972, vol. 1, p. 39.
B. C. Allen: inLiquid Metals-Chemistry and Physics, S. Z. Beer, ed., M. Dekker, Inc., New York, NY, 1972, p. 161.
Aluminum Standards and Data, 5th ed., The Aluminum Association, New York, NY, 1976, p. 38 and p. 40.
Aluminum, K. R. Van Horn, ed., ASM, 1967, vol. l, ch. 1, pp. 1-30.
S. Kou and Y. Le:Metall. Trans. A, 1984, vol. 15A, p. 1165.
M. Lu and S. Kou: unpublished work at University of Wisconsin, Madison, WI, 1985.
C. R. Heiple and J. R. Roper:Weld. J., 1982, vol. 61, p. 97s.
C. R. Heiple and P. Burgardt:Weld. J., 1985, vol. 64, p. 159s.
T. T. Van, R. A. Karasev, and A. M. Samarin:Russian Metallurgy and Fuels, 1960, vol. 2, p. 33.
K. M. Gupt, V. I. Yavoiski, A. F. Vishkaryov, and S. A. Bliznukov:Trans. Indian Inst. Metals, 1976, vol. 29, p. 286.
S. I. Popel, B. V. Tsarevskiy, V. V. Pavlov, and E. L. Furman:Russian Metallurgy, 1975, (4), p. 42.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Kou, S., Wang, Y.H. Computer simulation of convection in moving arc weld pools. Metall Trans A 17, 2271–2277 (1986). https://doi.org/10.1007/BF02645925
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02645925