Abstract
The possibility of using laser radiation for pattern cutting of sheet carbon-based materials is analyzed. It is theoretically justified and experimentally demonstrated that continuous-wave laser radiation can be efficiently used only for pattern cutting of carbon-based plastics and carbon-carbonaceous composites with a thickness of up to 1.5 mm. For laser-beam pattern cutting of carbon-based composites of larger thickness, the use of pulse-recurrent radiation with high pulse-repetition rate in the multipass-cutting mode is promising.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
A. A. Vedenov and G. G. Gladush,Physical Processes in Laser Treatment of Materials [in Russian], Énergoatomizdat, Moscow (1985).
N. N. Rykalin,Evaluation of Thermal Processes in Welding [in Russian], Mashgiz, Moscow (1951).
S. I. Anisimov, Ya. A. Imas, G. S. Romanov, and Yu. V. Khodyko,Effects of High-Power Radiation on Metals [in Russian], Nauka, Moscow (1970).
N. N. Rykalin, A. A. Uglov, and A. N. Kokora,Laser Treatment of Materials [in Russian], Mashinostroenie, Moscow (1975).
N. N. Rykalin, A. A. Uglov, I. V. Zuev, and A. N. Kokora,Laser and Electron-Beam Treatment of Materials. A Reference Book [in Russian], Mashinostroenie, Moscow (1985).
I. P. Losev and E. B. Trostyanskaya,The Chemistry of Synthetic Polymers [in Russian], Khimiya, Moscow (1964).
A. G. Freizer,Heat-Resistant Polymers [in Russian], Khimiya, Moscow (1971).
V. A. Kargin and V. A. Kabanov (Eds.),Encyclopedia of Polymers [in Russian], Sovetskaya Éntsiklopediya, Moscow (1972–1977).
G. A. Abil'siitov, V. S. Golubev, V. G. Gontar', et al.,Technological Lasers. A Reference Book, Vol. 1:Design and Operation [in Russian], Mashinistroenie, Moscow (1991).
S. V. Shulepov,The Physics of Carbon-Graphite Materials [in Russian], Metallurgiya, Moscow (1972).
Author information
Authors and Affiliations
Additional information
Translated from a manuscript submitted April 27, 1999.
Rights and permissions
About this article
Cite this article
Gureev, D.M., Kuznetsov, S.I. & Petrov, A.L. Laser-beam pattern cutting of carbon-based composites. J Russ Laser Res 20, 349–361 (1999). https://doi.org/10.1007/BF02508655
Issue Date:
DOI: https://doi.org/10.1007/BF02508655