Abstract
Two independent experimental techniques are used to measure the strain distribution within the plastically deformed region around a crack tip. Moiré grid interference is used to measure the in-plane strain with the specimen grid engraved directly on the specimen surface. Optical interference is used to measure the through-the-thickness strain over the same engraved area. The testing arrangement allows measurement of at-load strain as well as residual strain. The measured strain distribution is compared with recent work by Swedlow using a finite-element numerical technique and with results of the etch-pit technique used by Hahn and Rosenfield.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Irwin, G. R., “Structural Aspects of Brittle Fracture,”Appl. Matls. Res.,3,65 (April1964).
Rice, J. R., “The Mechanics of Crack Tip Deformation and Extension by Fatigue,” Brown Univ. Technical Report NSF GK-286/3 (May 1966).
Rice, J. R., andRosengren, G. F., “Plane Strain Deformation Near a Crack Tip in a Power-Law Hardening Material,”Jnl. Mech. Phys. Solids,16,1 (Jan.1968).
Hutchinson, J. W., “Singular Behavior at the End of a Tensile Crack in a Hardening Material,”Jnl. Mech. Phys. of Solids,16,13 (Jan.1968).
Swedlow, J. L., Williams, M. L., andYang, W. H., “Elasto-Plastic Stresses and Strains in Cracked Plates,”Proc. First Internatl. Conf. on Fracture,1,259–282 (1965).
Swedlow, J. L., “Character of the Equations of Elasto-Plastic Flow in Three Independent Variables,” Internatl. Jnl. Non-Linar Mech., to be published.
Oppel, G. U., andHill, P. W., “Strain Measurement at the Root of Cracks and Notches,”Experimental Mechanics,4, (6),206 (1964).
Gerberich, W. W., “Plastic Strains and Energy Density in Cracked Plates, Part I—Experimental Technique and Results,”Ibid.,,4 (11),335 (1964).
Duffy, J., “Effects of the Thickness of Birefringent Coatings,”Ibid.,,1 (3),74 (1961).
Hahn, G. T., andRosenfield, A. R., “Local Yielding and Extension of a Crack Under Plane Stress,”Acta Metallurgica,13,293 (March1965).
Rosenfield, A. R., Dai, P. K., andHahn, G. T., “Crack Extension and Propagation Under Plane Stress,”Proc. First Internatl. Conf. on Fracture,1,223 (1965).
Douglas, R. A., Akkoc, C., andPugh, C. E., “Strain-field Investigations with Plane Diffraction Gratings,”Experimental Mechanics,5 (7),233 (1965).
Theocaris, P. S., “The Moiré Method in Thermal Fields,”Ibid.,,4 (8),223 (1964).
Swedlow, J. L., private communication, work in progress under NASA Research Grant NGR-39-002-023. To be published in Internatl. Jnl. of Fracture Mechanics.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Underwood, J.H., Kendall, D.P. Measurement of microscopic plastic-strain distributions in the region of a crack tip. Experimental Mechanics 9, 296–304 (1969). https://doi.org/10.1007/BF02325135
Issue Date:
DOI: https://doi.org/10.1007/BF02325135