Article PDF
Avoid common mistakes on your manuscript.
References
R. Edwards and T. Raine, “The solid solubilities of some stable carbides in cobalt, nickel and iron at 1250°C,” Plansee Seminar “De re metallica,” Springer, Wien (1953), p. 232.
P. Rautala and J. T. Norton, “Tungsten-cobalt-carbon system,”J. Metals,4, 1045 (1952).
A. Hara, T. Nishikawa, and S. Jazu, “The observation of the fracture path in WC-Co cemented carbides using a newly developed replica method with electron microscope,”Planseeber. Pulvermet.,18, 28 (1970).
F. R. N. Nabarro and S. B. Luycky, “The theory of the strength of tungsten-carbide-cobalt compacts,”Trans. Jpn. Inst. Met., Suppl., No. 9, 610 (1968).
H. Doit, J. Fujiwara, and K. Mijake, “Mechanism of plastic deformation and dislocation damping of cemented carbides,”Trans. Jpn. Inst. Met., Suppl., No. 9, 616 (1968).
W. Dawihl and G. Altmeyer, “Über den Einflub von Kerben und einer Warmbehandlung auf die Biegeschwellfestigkeit von Wolframkarbid-Kobalt-Legierungen,”Z. Metallkd.,57, 688 (1966).
G. S. Kreimer and O. S. Safonova, “On the influence of heat treatment and cooling rate on hard-alloys properties during sintering,”Tverd. Splavy, No. 5, 152 (1964).
N. V. Moinova, I. N. Chaporova, and N. A. Klochko, “The influence of heating and cooling regimes on the properties of hard alloys,”Tverd. Splavy, No. 5, 126 (1964).
I. M. Mukha and L. B. Globa, “The influence of the cooling rate on the hard-alloy properties,”Poroshk. Metall., No. 5, 91 (1971).
I. N. Chaporova, E. A. Shchetilina, and O. I. Serebrova, “On the influence of additional tempering on the properties of WC-Co cermet hard alloy,”Metalloved. Term. Obrab. Met., No. 7, 44 (1961).
Yu. N. Chepurkin and I. F. Molokhov, “Improvement of cutting properties of hard alloys,”Trans. Perm' Polytech. Inst., No. 149, 131 (1974).
E. A. Shchetilina, O. I. Serebrova, and K. F. Kuznetsova, “The influence of heat treatment on the properties of VK11V alloy,” in:Data Collection on Physical Metallurgy and Technology of Cermet Hard Alloys, Refractory Metals and Related Compounds, Pt. 2, TsNIITsvetmet, Moscow (1963), p. 44.
I. N. Chaporova and E. A. Shchetilina, “The influence of the postsintering cooling rate on the properties of the WC-Co(Ni) alloys,”Tverd. Splavy, No. 4, 237 (1962).
Method of Heat Treatment of Sintered Hard Alloy, USSR Iventor's Certificate No. 1238890, MKI 22, F 3/24.
E. A. Shchetilina, “Studies of the interphase surface of the WC-Co alloys,”Tsvetn. Met., No. 9, 85 (1971).
I. N. Chaporova, E. A. Shchetilina, and O. I. Serebrova, “On the influence of cementing phases on some mechanical properties of WC-Co and WC-Ni cermet hard alloys,”Tverd. Splavy, No. 2, 90 (1960).
H. Suzuki, M. Sugiyama, and T. Umeda, “Effect of annealing on properties of sintered WC-Co alloys,”Trans. Jpn. Inst. Met.,28, 287 (1964).
O. Rüdiger and H. E. Exner, “L'apport des recherches fondamentales au developement des metaux durs,”Matér. et Techn.,5, 122 (1975).
H. Jonsson, “Studies of the binder phase in WC-Co cemented carbides heat-treated at 950°C,”Planseeber. Pulvermet.,23, 37 (1975).
Production of Cemented Carbides of High Ductility, Austria Patent No. 175708, published August 10, 1953.
M. G. Loshak,Strength and Durability of Hard Alloys [in Russian], Naukova Dumka, Kiev (1984).
H. Jonsson, “Composition and microstructure of binder phases of slowly cooled WC-Co cemented carbides,”Plansbeer. Pulvermet.,21, 187 (1973).
V. I. Tumanov, V. F. Funke, Z. I. Pavlova, et al., “On determination of compressive strength of hard alloys,”Zavod. Lab., No. 8, 981 (1963).
M. G. Loshak and L. I. Alexandrova,Hardening of Cemented Carbide Alloys [in Russian], Naukova Dumka, Kiev (1977).
O. Rüdiger, D. Hirschfeld, A. Hoffman, et al., “Composition and properties of the binder metal in cobalt bonded tungsten carbide,”Int. J. Powder Met., No. 7, 29 (1971).
V. I. Tumanov, E. A. Shchetilina, S.M.Elmanova, et al., “Structure and physical-mechanical properties of cast and sintered WC-Co alloys,”Izv. Akad. Nauk SSSR, Met., No. 5, 152 (1968).
V. I. Tumanov, E. A. Shchetilina, S. M. Elmanova, et al., “Studies of structure and physical-mechanical properties of cast and sintered WC-Co alloys at room temperature,”Tverd. Splavy, No. 8, 212 (1969).
L. I. Mirkin and N. F. Pilipetskii, “Hardening of a hard alloy on exposure to an optical beam,”Izv. Akad. Nauk SSSR, Met., No. 3, 137 (1967).
V. N. Filimonenko, A. N. Zhuravlev, and G. A. Iskhakova, “Studies of physical-mechanical properties of the surface layer of a VK alloy treated with laser,” in:Advanced Methods of Metal Treatment [in Russian], Novosibirsk State University, Novosibirsk (1977), p. 8.
V. A. Burakov, V. K. Kazakov, and E. R. Mamina, “Character and technological outlook of laser hardening of hard alloys,” in:Advanced Methods of Heat Treatment in Tractor and Agricultural-Machine Building [in Russian], Inst. Sel'skokhoz. Mashinostr., Rostov-on-Don (1977), p. 23.
V. N. Filimonenko, A. N. Zhuravlyov, and G. A. Iskhakova, et al., “Hardening of tungsten-cobalt hard alloys with laser beam,” in:Electrical-Physical and Electrical-Chemical Methods of Treatment [in Russian], NIIMash, Moscow (1980), No. 5, p. 6.
E. A. Pamfilov and T. G. Borzenkova, “Enhancement of durability of hard alloys with laser beam,”Vestn. Mashinostr., No. 3, 61 (1982).
T. N. Loladze,Strength and Wear Resistance of Cutting Tool [in Russian], Mashinostroenie, Moscow (1982).
N. N. Zorev and Z. M. Fetisova,Cutting of Refractory Alloys [in Russian], Mashinostroenie, Moscow (1966).
N. V. Talantov and M. E. Dudkin, “Studies of diffusion processes on steel machining with hard-alloy tools,” in:Machine-Building Technology and Manufacturing Automation [in Russian], Politekhn. Inst., Volgograd (1978), p. 79.
N. V. Talantov, M. E. Dudkin, and M. G. Loshak, “Studies of cutting properties of heat-hardened hard alloys,” in:Advanced Technology of Cutting-Tool Manufacture [in Russian], MDNTP, Moscow (1978), p. 7.
A. Z. Grasyuk, V. F. Efimov, and V. G. Smirnov, “A focusing prism scanner,”Prib. Tekh. Éksp., No. 1, 174 (1976).
L. V. Bazhenova, S. V. Kayukov, G. I. Yakushkin, and S. I. Yares'ko, “Heat treatment of cutting dies with pulsed-laser beam,”Tekhnol. Organiz. Proizvod., No. 2, 45 (1987).
N. I. Romanova, P. G. Chekulaev, V. I. Dusev, et al.,The Cermet Hard Alloys [in Russian], Metallurgiya, Moscow (1970).
I. N. Chaporova and K. S. Chernyavskii,Structure of Sintered Hard Alloys [in Russian], Metallurgiya, Moscow (1975).
S. G. Rautian, “Actual spectral instruments,”Usp. Fiz. Nauk,66, 475 (1958).
B. I. Uorren, “The X-ray studies of deformed metals,” in:Advances in Metals [in Russian], Metallurgizdat, Moscow (1963), Vol. 5, p. 172.
V. I. Iveronova and G. P. Revkevich,The Theory of X-Ray Scattering [in Russian], Moscow State University, Moscow (1978).
A. I. Mel'ker and V. V. Prudnikova, “Algorithms and program for computerized calculations of polycrystal fine structure by the harmonic analysis method,”Trans. Leningr. Politekhn. Inst., No. 341, 81 (1975).
V. D. Vishnyakov,Modern Methods for Study of Deformed Metals [in Russian], Metallurgiya, Moscow (1975).
T. I. Moshkina and M. S. Nakhmanson, “Program package for determination of crystal fine structure by the harmonic analysis of x-ray line profile,” in:Equipment and Methods of X-Ray Analysis [in Russian], Mashinostroenie, Leningrad (1984), No. 32, p. 78.
D. M. Gureev, V. A. Katulin, A. P. Laletin, et al., “Studies of structural transformations in VK8 hard alloy in the pulsed-laser affected zone,”Fiz. Khim. Obrab. Mater., No. 5, 46 (1966).
D. M. Gureev, A. P. Laletin, and S. I. Yares'ko, “Changes in structure and properties of VK8 alloy on laser exposure,” in:Proceedings of the Conference on Design and Use of Laser Equipment and Treatment in Machine-Building and Instrument Making [in Russian], Kiev (1985), p. 125–126.
D. M. Gureev, V. A. Katulin, A. P. Laletin, et al., “Pulse laser radiation capabilities in increasing the durability of cutting tool made of VK8 hard alloy,” in:Abstracts of the Fifth Intern. Conference on Lasers and their Applications, Dresden (1985), p. 60.
Diagrams of State of Binary and Multinary Iron-Based Systems. A Reference Book [in Russian], Metallurgiya, Moscow (1986).
Author information
Authors and Affiliations
Additional information
Translated from Trudy Fizicheskogo Instituta im. P. N. Lebedeva (Proceedings of the Lebedev Physical Institute, Russian Academy of Sciences, Moscow), Vol. 198, pp. 90–110, 1989.
Rights and permissions
About this article
Cite this article
Gureev, D.M., Laletin, A.P., Petrov, A.L. et al. Pulsed-laser effect on structural and phase composition of hard alloys and the performance of tools based on them. J Russ Laser Res 17, 623–643 (1996). https://doi.org/10.1007/BF02069177
Issue Date:
DOI: https://doi.org/10.1007/BF02069177