Article PDF
Avoid common mistakes on your manuscript.
References
M. E. Garber,Castings of White Wear-Resistant Irons [in Russian], Mashinostroenie, Moscow (1976).
Yu. G. Bobro,Alloy Cast Irons [in Russian], Metallurgiya, Moscow (1976).
N. N. Rykalin,Calculations of Thermal Processes in Welding [in Russian], Mashinostroenie, Moscow (1951).
N. N. Rykalin, A. A. Ulov, and A. N. Kakora,Laser Treatment of Materials [in Russian], Mashinostroenie, Moscow (1975).
D. M. Gureev, A. V. Zolotarevskii, and S. I. Mednikov, “Heat treatment of high-speed tools with a continuous wave laser of different profiles,”Fiz. Khim. Obrab. Mater., No. 4, 23 (1986).
P. E. Belyakova, “The physical properties of white chromium irons,”Metalloved. Term. Obrab. Met., No. 12, 45 (1975).
K. Bungardt, “Untersuchungen über den Aufbau des Systems Eisen-Chrom-Kohlenstoff,”Arch. Eisenhüttenw.,29, 193 (1958).
D. M. Gureev, A. E. Zaikin, and S. V. Yamshchikov, “Laser and heat-treatment effect on the structure and properties of high-chromium cast iron,”Metalloved. Term. Obrab. Met., No. 11, 14 (1985).
I. N. Tsypin,White Wear-Resistant Cast Irons. Structure and Properties [in Russian], Metallurgiya, Moscow (1983).
L. Kamarash, “The structure and properties of white high-chromium cast irons,”Metalloved. Term. Obrab. Met., No. 3, 66 (1974).
Zh. S. Bobukh, Yu. G. Bobro, and I. A. Tananko, “A study of transformations during heating of a high-chromium cast iron,”Vestn. Politekh. Inst. (Khar'kov), No. 55, 19 (1971).
S. N. Ivanov, I. E. Lev, and K. N. Minyailovskii, “Liquations in high-chromium cast iron and its heat treatment,”Liteinoe Proizvod., No. 5, 26 (1968).
A. I. Stepina, V. V. Vagin, and T. N. Doroshenko, “Ways of increasing wear-resistance of high-chromium cast iron,”Metalloved. Term. Obrab. Met., No. 9, 71 (1976).
K. N. Minyailovskii, “Phase transformations under heat treatment of wear-resistant high-chromium cast irons,” PhD Thesis, Part 1 [in Russian], Kommunarsk (1969).
V. N. Vinogradov, G. A. Sorokin, and A. Yu. Albagachiev,Impact Wear [in Russian], Mashinostroenie, Moscow (1982).
V. N. Kashcsheev, “The part played by carbides in resistance of steel surfaces to impact failure,”Mashinostroitel', No. 6, 87 (1982).
I. R. Kleis, “On some mechanisms of wear,”Vestn. Mashinostr., No. 8, 52 (1967).
L. A. Urvantsov,Erosion and Metal Protection [in Russian], Mashinostroenie, Moscow (1966).
C. M. Preece (ed.),Erosion, Treatise on Materials Science and Technology, Academic Press, New York (1979), Vol. 16.
M. S. Drozd, “The cold-hardened layer depth under shotblasting,”Vestn. Mashinostr., No. 5, 48 (1955).
I. I. Novikov,The Theory of the Heat Treatment of Metals [in Russian], Metallurgiya, Moscow (1974).
S. S. Gorelik, L. N. Rastorguev, and Yu. A. Skakov,The X-ray Diffraction and Electron-Microscopic Analysis [in Russian], Metallurgiya, Moscow (1980).
Author information
Authors and Affiliations
Additional information
Translated from Trudy Fizicheskogo Instituta im. P. N. Lebedeva (Proceedings of the Lebedev Physical Institute, Russian Academy of Sciences, Moscow), Vol. 198, pp. 74–89, 1989.
Rights and permissions
About this article
Cite this article
Gureev, D.M., Matveev, Y.M., Mednikov, S.I. et al. The use of a continuous-wave CO2 laser for hardening of wear-resistant high-chromium cast iron. J Russ Laser Res 17, 607–622 (1996). https://doi.org/10.1007/BF02069176
Issue Date:
DOI: https://doi.org/10.1007/BF02069176