Abstract
A new temperature programmer has been developed to provide accurate and sharp temperature programs for different ovens and furnaces, including those of thermoanalytical instruments. Control is based on two temperature sensors (thermocouples or resistance thermometers); sensor “A” is situated in the working space of the furnace (in the vicinity of the sample), while sensor “B” is near the heating wire.
The principle of operation and the effects of controls are discussed, and several examples are presented to demonstrate the use of the programmer with different heater assemblies.
Résumé
On a mis au point un nouveau programmeur de température afin d'obtenir des programmes de température exacts et nets avec divers fours, y compris ceux des instruments d'analyse thermique. Le contrôle repose sur deux senseurs de température (thermocouples ou thermomètres à résistance); le senseurA se trouve dans l'espace de travail du four (à proximité de l'échantillon), le senseurB se trouve près du fil de chauffage.
Le principe de l'opération et l'effet du contrôle sont discutés; plusieurs exemples montrent l'application du programmeur avec différents dispositifs de chauffage.
Zusammenfassung
Ein neues Temperaturprogrammiergerät wurde zur Herstellung genauer und scharfer Temperaturprogramme für verschiedene Öfen, thermoanalytische Geräte mit inbegriffen — erarbeitet. Die Steuerung beruht auf zwei Temperatursensoren (Thermoelemente oder Widerstandsthermometer); der SensorA befindet sich im Arbeitsraum des Ofens (in der Nähe der Probe), der SensorB ist in der Nähe der Heizwicklung.
Das Arbeitsprinzip und der Effekt der Steuerungen wird erörtert und mehrere Beispiele angeführt, um die Anwendung des Programmiergeräts mit verschiedenen Heizvorrichtungen zu zeigen.
Резюме
Разработан новый тем пературный программ атор, предназначенный для обеспечения точных и резких темпе ратурных программ в р азличных термостатах и печах, включая таковые в тер моаналитических при борах. Контроль осуществля ется двумя температу рными сенсорами, из которых сенсор „A” размещен в рабочем пространстве печи (в непосредственной б лизости к образцу), а се нсор „B”-около нити нагрев а. Обсужден принцип работы прибора и влия ние регулировки. Пред ставлено несколько примеров, п оказывающих использование прогр амматора с различным и нагревательными уст ройствами.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
Author information
Authors and Affiliations
Additional information
Digital Temperature Programmer LP 839 has been developed at Budapest Technical University. It is manufactured by CHINOIN, and exported by METRIMPEX and AKADIMPORT Budapest, Hungary.
Rights and permissions
About this article
Cite this article
Gál, S., Muráti, J. & Sztatisz, J. Digital temperature programmer with two temperature sensors. Journal of Thermal Analysis 21, 163–171 (1981). https://doi.org/10.1007/BF01913710
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF01913710