Summary
In this paper we examine the complexities associated with the kinematics of finite elastoplastic deformations and other issues related to the development of constitutive equations. The decomposition of the total strain and strain rate tensors into elastic and plastic constituents is investigated by considering both a multiplicative decomposition of the deformation gradient and an additive decomposition of the deformation vector field. Physically based definitions for the elastic and plastic strain rate tensors are given and compared with other values found in the literature. Constitutive equations for the plastic flow are derived by considering both a phenomenological-energy approach and a physically motivatedmesomechanical approach based on the double-slip idealization. It is shown that by resorting to the mechanics of the double slip, specific relations for the plastic stretching and plastic spin can be rigorously derived, taking into account the effect of noncoaxiality and material rotation. Finally, the implication of such effects to large deformations is examined in connection with the localization phenomenon.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Lee, E. H., Liu, D. T.: Finite-strain elastic-plastic theory with application to plane wave-analysis. J. Appl. Phys.38, 19–27 (1967).
Lee, E. H.: Elastic-plastic deformation at finite strains. J. Appl. Mech.36, 1–6 (1969).
Kratochvil, J.: Finite strain theory of inelastic behavior of crystalline solids. In: Foundation of plasticity (Sawczuk, Al., ed.) pp. 401–415. Leyden: Noordhoff 1974.
Sidoraff, F.: On the formulation of plasticity and viscoplasticity with internal variables. Arch. Mech.27, 807–819 (1975).
Nemat-Nasser, S.: Decomposition of strain measures and their rates in finite deformation elastoplasticity. Int. J. Sol. Struct.15, 155–166 (1979).
Green, A. E., Naghdi, P. M.: A general theory of an elastic-plastic continuum. Ach. Rat. Mech. Anal.18, 251–281 (1965).
Naghdi, P. M., Trapp, J. A.: Restrictions on constitutive equations of finitely deformed elastic-plastic materials. Q. J. Mech. Appl. Math.XXVIII, 25–46 (1975).
Dafalias, Y. F.: The plastic spin concept and a simple illustration of its role in finite plastic transformation. Mech. Mat.3, 223–233 (1984).
Onat, E. T.: Shear flow of kinematically hardening rigid-plastic materials. In: Mechanics of materials behavior (Dvorak, G. J., Shield, R. T., eds.), pp. 311–323. Elsevier 1984.
Loret, B.: On the effects of plastic rotation in the finite deformation of anisotropic elastoplastic materials. Mech. Mat.2, 287–304 (1983).
Zbib, H. M., Aifantis, E. C.: On the concept of relative and plastic spins and its implications to large deformation theories. I & II. Acta Mech.75, 15–33, and 35–56 (1988).
Anand, L.: Plane deformations of ideal granular materials. J. Mech. Phys. Sol.31, 105–122 (1983).
Aifantis, E. C.: The physics of plastic deformation. Int. J. Plasticity3, 211–237 (1987).
Malvern, L. E.: Introduction to the mechanics of a continuous medium. Prentice-Hall 1969.
Mandel, J.: Foundation of continuum thermodynamics, (Domingos, J. J. D., Nina, M. N. R., Whitelaw, J. H., eds.) pp. 283–304. Macmillan 1974.
Zbib, H. M.: Deformations of materials exhibiting noncoaxiality and finite rotations. Scripta Metall.23, 789–794 (1989).
Nemat-Nasser, S.: On finite plastic flow of crystalline solids and geomaterials. J. Appl. Mech.50, 1114–1126 (1983).
Lowe, T. C., Asaro, R. J.: Analysis of the evolution of texture and axial stresses in f.c.c. polycrystals subjected to large shear strain. In: IUTAM/ICM Symposium, Villors de Lans, France 1987.
Tóth, L. S., Neale, K. W., Jonas, J. J.: Stress response and persistence characteristics of the ideal orientations of shear textures. Acta Metall.37, 2197–2210 (1989).
Shawki, T. G., Clifton, R. J., Kadioglus, Y.: Calculation of the viscoplastic response of polycrystals from slip theory of f.c.c. single crystals. T & AM Report No. 493, Univ. Illinois at Urbana-Champaign (1989).
Mandel, J.: Genéralisation de la théorie de plasticité de W. T. Koiter. Int. J. Sol. Struct.1, 273–295 (1965).
Hill, R.: Aspects of invariance in solid mechanics. In: Advances in applied mechanics (Yih, C. S., ed.)18, 1–75. Academic Press 1978.
Hill, R., Rice, J. R.: Elastic potentials and the structure of inelastic constitutive laws. SIAM J. Appl. Math.25, 448–461 (1973).
Il'iushin, A. A.: On the postulate of plasticity. Prikl. Mat. Mech.25, 503–507 (1961).
Asaro, R. J.: Geometrical effects in the inhomogeneous deformation of ductile single crystals. Acta Metall.27, 445–453 (1979).
Walgraef, D., Aifantis, E. C.: On the formation and stability of dislocation patterns. I, II & III. Int. J. Eng. Sci.23, 1351–1358, 1359–1364 and 1365–1372 (1985).
Essmann, U., Mughrabi, H.: Annihilation of dislocations during tensile and cyclic deformation and limits of dislocation densities. Phil. Mag.40, 731–756 (1979).
Kratochvil, J.: Dislocation pattern formation in metals. Revue Phys. Appl.23, 419–429 (1988).
Stören, S., Rice, J. R.: Localized necking in thin sheets. J. Mech. Phys. Sol.23, 421–441 (1975).
Zbib, H. M.: On the concept of noncoaxiality and large material rotations: a double-slip system. Mech. Res. Comm.17, 217–222 (1989).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Zbib, H.M. On the mechanics of large inelastic deformations: kinematics and constitutive modeling. Acta Mechanica 96, 119–138 (1993). https://doi.org/10.1007/BF01340705
Received:
Revised:
Issue Date:
DOI: https://doi.org/10.1007/BF01340705