Conclusions
Nozzles for steelcasting are more durable when produced with an aluminochromophosphate binder than with an aluminophosphate binder, the reasons being the more favorable conditions for the preparation of the batch and the state of the bond during firing and in the steelcasting process. Nozzles containing ACPB No. 2 binder should also be produced and tested on an industrial scale.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
Literature cited
A. N. Sokolov, L. G. Stochek, N. D. Karpov, et al., Authors' Certificate No, 342846. Byull. Izobr., No. 20, 69 (1972).
M. P. Dovnar, L. G. Stochek, B. G. Markelov, et al., Ogneupory, No. 8, 8–9 (1972).
S. L. Golynko-Vol'fson, M. M. Sychev, L. G. Sudakas, et al., in; Chemical Principles of the Technology and Use of Phosphate Binders and Coatings [in Russian], Khimiya, Leningrad (1968).
É. V. Degtyareva, Trans. Ukr. Scientific-Research Institute for Refractories [in Russian], No. 5, Metallurgizdat, Khar'kov (1961), pp. 290–298.
L. B. Khoroshavin, G. V. Dolgikh, and V. M. Ust'yantsev, Ogneupory, No. 8, 43–44 (1970).
G. A. Semenov, K. E. Frantseva, E. N. Nikolaev, et al., Ogneupory, No. 6, 52–55 (1974).
A. V. Bromberg, A. G. Kasatkina, V. A. Kopeikin, et al., Neorgan. Mat.,5, No. 4, 805–807 (1969).
W. D. Kingery, J. Amer. Ceram. Soc.,1, No. 8, 247–250 (1950).
T. Chvatal, Bol. Soc. Esp. Ceram.,7, No. 2, 165–167 (1968).
F. D. Yvoire, Bull. Soc. Chim. France, No. 10, 1762–1777 (1961).
F. D. Yvoire, Bull. Soc. Chim. France, No. 6, 1237–1243 (1962).
Author information
Authors and Affiliations
Additional information
Translated from Ogneupory, No. 11, pp. 48–53, November, 1975.
Rights and permissions
About this article
Cite this article
Solovushkova, G.É., Shmitt-Fogelevich, S.P., Mel'nikova, G.G. et al. Phosphate binders in refractories for steelcasting. Refractories 16, 712–716 (1975). https://doi.org/10.1007/BF01280607
Issue Date:
DOI: https://doi.org/10.1007/BF01280607