Article PDF
Avoid common mistakes on your manuscript.
Literature Cited
O. I. Avseevich, “Characteristics of erosion accompanying pulsed discharges,”, in: Physical Foundations of Electric-Spark Treatment of Metals [in Russian], Nauka, Moscow (1966), pp. 63–74.
V. S. Aleinikov, V. P. Belyaev, and Yu. V. Pechenin, “Fundamental problems in the development of efficient gas lasers for high-productivity technological equipment,”, Elektron. Prom-st', No. 5/6, 39–51 (1981).
V. D. Aleksanyan, Yu. K. Bobrov, A. D. Verkhoturov, et al., “Spectral study of the temperature and composition of plasma in electric-spark alloying,” Elektrofiz. Elektrokhim. Metody Obrab., No. 2, 9–10 (1982).
V. G. Aleshin, A. I. Kharlampov, and T. S. Bartnitskaya, “Character of the interatomic interaction in metallike nitrides,” Izv. Akad. Nauk SSSR, Neorg. Mater.,15, No. 4, 677–680 (1979).
V. G. Aleshin, A. I. Kharlamov, and M. G. Chudinov, “Use of x-ray photoelectron spectroscopy to study the surface state of refractory alloys,” Izv. Akad. Nauk SSSR, Neorg. Mater.,15, No. 4, 672–676 (1979).
R. A. Alfintseva, L. G. Bodrova, and A. D. Verkhoturov, “Use of borides of refractory metals as electrodes for electric-spark treatment,” Proshk. Metall., No. 4, 68–72 (1980).
K. Al'binski, “Investigation of erosion resistance of working electrodes for electric-spark and electric-pulse treatment,” Stanki Instrumenty, No. 7, 11–13 (1964).
V. I. Andreev, V. N. Marozenko, N. I. Beda, et al., “Electric-spark alloying of parts operating under conditions of thermocyclic loading,” Elektron. Obrab. Mater., No. 3, 24–25 (1973).
V. M. Andriyakhin, S. E. Zverev, and N. G. Chekanova, “Laser hardening of U10 steel,” Avtomob. Prom-st', No. 5, 28–29 (1980).
V. M. Andriyakhin and N. T. Chekanova, “Some types of coatings employed in laser treatment of metals,” Poverkhnost', Fiz., Khim., Mekh., No. 2, 62–70 (1983).
V. M. Andriyakhin and N. T. Chekanova, “Effect of high-power CO2 laser on the structure and properties of cast irons”, Poverkhnost', Fiz., Khim., Mekh., No. 3, 129–137 (1983).
V. M. Andriyakhin, V. S. Maiorov, and V. P. Yakushin, “Absorptivity of coatings in laser heat treatment of ferrous metals,” Fiz. Khim. Obrab. Mater., No. 5, 89–94 (1984).
V. T. Antonov, “Essence, main features, and group of setups for application of the method of local deposition of metallic and alloy coatings,” in: Reports at the International Electronics Congress [in Russian], Nauka, Moscow (1977), pp. 18–20.
B. M. Askinazi, Finishing Treatment of Metal Surfaces with Heating [in Russian], Mashgiz, Moscow (1961).
N. V. Afanas'ev, “Some problems in the theory and calculation of electric erosion,” in: Electric-Spark Treatment of Materials [in Russian], Izd. Akad. Nauk SSSR, Moscow (1963), pp. 73–78.
N. V. Afanas'ev, S. N. Kapel'yan, and L. P. Filipov, “Some characteristics of electric damage in electrodes accompanying discharges in gaseous and liquid media,” Elektron. Obrab. Mater., No. 1, 3–8 (1970).
L. N. Babanskaya, “Study of the structure and composition of alloys in the interaction zone of a low-voltage spark discharge in argon,” Author's Abstract of Candidate's Dissertation, Technical Sciences, Institute of Metal Physics of the Ukrainian SSR Academy of Sciences, Kiev (1980).
K. M. Banas, “Laser treatment of materials,” Trans. IEEE,70, No. 6, 35–45 (1982).
M. V. Bol'shakov, “Thermodynamic analysis of adhesive interaction and coalescence of uniform refractory metals,” Fiz.-Khim. Mekh. Mat., No. 5, 13–16 (1981).
A. I. Borisenko and K. A. Vyashchenko, “Diffusion processes at the metal-coating interface,” in: High-Temperature Protection of Metals [in Russian], Nauka, Leningrad (1982), pp. 3–8.
Yu. M. Buravlev, I. V. Karpenko, and B. T. Nadezhda, “Some characteristics of laserinduced transformation of the structure of steels,” Fiz. Khim. Obrab. Mater., No. 3, 112–115 (1974).
Yu. M. Buravlev, N. K. Rudnevskii, and I. A. Grikit, Spectral Analysis of Metals and Alloys [in Russian], Tekhnika, Kiev (1976).
V. A. Burakov, G. I. Brover, and N. M. Burakova, “Heat resistance of R6M5 steel after laser treatment,” Metalloved. Term. Obrab. Met., No. 9, 33–36 (1982).
V. P. Veiko, A. N. Kokora, and M. N. Libenson, “Experimental check of the temperature distribution in the zone of interaction of laser radiation with a metal,” Dokl. Akad. Nauk SSSR,179, No. 1, 68–71 (1967).
V. P. Veiko and M. N. Libenson, Laser Treatment [in Russian], Lenizdat, Leningrad (1973).
V. S. Velikikh, V. P. Goncharenko, and V. S. Kartavtsev, “Laser hardening of tool steels,” Tekhnol. Org. Pr-va, No. 11, 45–46 (1976).
A. D. Verkhoturov, “Effect of the physical-chemical properties of metals on their erosion stability under the action of concentrated energy fluxes,” in: Configurational Representations of Electronic Structure in Physical Metal Science [in Russian], Naukova Dumka, Kiev (1977), pp. 130–136.
A. D. Verkhoturov and I. S. Anfimov, “Distribution of matter of electrodes in their working surfaces after electric-spark alloying of steel with group IV–VI transition metals,” Fiz. Khim. Obrab. Mat., No. 3, 93–98 (1978).
A. D. Verkhoturov, A. M. Paramonov, and V. T. Bondar', “Effect of the frequency of a pulsed current on the formation of a hardened layer in electric spark alloying,” Poroshk. Metall., No. 7, 90–94 (1980).
A. D. Verkhoturov, F. F. Egorov, and V. T. Bondar', “Electric-spark alloying of steel with heterophase materials based on TiN and ZrN,” Poroshk. Metall., No. 4, 68–72 (1980).
A. D. Verkhoturov, I. A. Podchernyaeva, F. F. Egorov, and M. D. Smolin, “Electric-spark alloying of steel with titanium carbide in the region of homogeneity,” Poroshk. Metall., No. 9, 28–30 (1982).
A. D. Verkhoturov and I. M. Mukha, Technology of Electric-Spark Alloying of Metallic Surfaces [in Russian], Tekhnika, Kiev (1982).
A. D. Verkhoturov, M. S. Koval'chenko, M. M. Mai, et al., “Effect of the structure of titanium diboride on the conditions of formation of coatings in electric-spark alloying of steel,” Poroshk. Metall., No. 8, 35–39 (1983).
A. D. Verkhoturov, A. S. Drachinskii, V. I. Trefilov et al. “Physical nature of erosion and formation of surface layer in electric-spark alloying of molybdenum with porous iron electrodes,” Poroshk. Metallurgiya, No. 12, 51–54 (1983).
V. M. Andriyakhin et al., “Effect of laser treatment on the wear resistance of SCh 24–44 cast iron,” in: Abstracts of Reports at the 1st All-Union Scientific Conference on Scientific-Technical Collaboration of Industry and Universities [in Russian], Moscow State Univ. Press (1980), pp. 12–13.
V. M. Golubets, M. I. Moisa, Yu. I. Babei, et al., “Effect of laser treatment on the wear of parts in an abrasive-oil medium,” Fiz. Khim. Obrab. Mater., No. 4, 114–115 (1972).
V. S. Chernenko et al., “Effect of laser irradiation on the structure and properties of steel,” in: New Methods for Hardening Steels [in Russian], KDNTP, Kiev (1977), pp. 9–11.
V. S. Velikikh et al., “Effect of laser treatment on the wear resistance and heat resistance of tool steels,” Tekhnol. Org. Pr-va, No. 4, 52–53 (1978).
E. N. Vlasov et al., “Effect of modification and treatment of the surface of ShKh15 steel with laser radiation on friction against a hard alloy,” Fiz. Khim. Obrab. Mater., No. 1, 156–159 (1976).
A. A. Uglov, V. P. Polukhin, and V. I. Ofer, “Effect of the nonuniformity of the distribution of thermal power in the heating spot of a laser beam on hardening of steels,” Fiz. Khim. Obrab. Mater., No. 5, 12–19 (1984).
L. N. Obishchenko et al., “Effect of the structure of the surface layer obtained by the method of laser hardening on the wear resistance of 40Kh steel,” Metalloved. Term. Obrab. Met., No. 5, 18–19 (1983).
V. M. Andriyakhin et al., “Effect of the scheme for laser hardening of cylinder lines on wear resistance,” Metalloved. Term. Obrab. Met., No. 9, 41–43 (1982).
V. I. Volgin, “Effect of laser alloying of a surface on the hardness of the aluminum alloy AL-25,” Poverkhnost': Fiz., Khim., Mekh., No. 1, 125–128 (1983).
A. D. Verkhoturov and I. A. Podchernyaeva, “Classification of the forms of electric-spark alloying,” Elektrofiz. Elektrokhim. Metody Obrab., No. 3, 5–7 (1983).
A. D. Verkhoturov, “Generalized model of the process of electric-spark alloying,” Elektrofiz. Elektrokhim. Metody Obrab., No. 1, 3–5 (1983).
V. P. Garashchuk, O. A. Velichko, and V. B. Davydova, “Effect of the average illumination in the light spot and degree of defocusing on the depth of melting of metals,” Avtomat. Svarka, No. 5, 31–35 (1971).
A. D. Verkhoturov, Yu. G. Skripka, and I. A. Podchernyaeva, “Ion-electron emission from the surface of iron after electric-spark alloying with transition metals,” Elektron. Obrab. Mater., No. 4, 18–21 (1982).
P. V. Gel'd, “Physical properties of refractory carbides,” Tr. Inst. Khim. UNTs AN SSSR,32, 3–12 (1975) [Proceedings of the Institute of Chemistry of the Ural Scientific Center of the USSR Academy of Sciences,32, 3–12 (1975)].
L. G. Goloveiko, “Dispersing of metals accompanying a pulsed discharge in a liquid dielectric,” in: Physical Foundations of Electric-Spark Treatment of Metals [in Russian], Nauka, Moscow (1966), pp. 74–86.
L. G. Goloveiko, “Kinetics of ejection of the liquid phase of electrode materials in an electric discharge,” Izv. Vyssh. Uchebn. Zaved., Energet., No. 6, 83–87 (1966).
Yu. M. Goryachev, I. A. Podchernyaeva, L. N. Okhremchuk, and N. I. Siman, “Anisotropy of the spectral density of states in ZrC and NbC crystals,” Izv. Akad. Nauk SSSR, Neorg. Mater.,15, No. 4, 689–694 (1979).
V. N. Gridnev and V. I. Trefilov, “Carbide phase in carbon steels accompanying electric tempering,” in: Problems in the Physics of Metals and Metal Science, Proceedings of the Institute of Metal Physics of the Ukrainian SSR Academy of Sciences (1959), No. 10, pp. 55–59.
A. G. Grigor'yants, A. N. Safonov, V. N. Tarasenko, and N. Yu. Mareev, “Structure and hardness of 45 steel after treatment with CO2 laser radiation,” Metalloved. Term. Obrab. Met., No. 9, 29–31 (1982).
N. N. Davidenkov, “Measurement of residual stresses,” Zavod. Lab.,16, No. 2, 188–192 (1950).
T. M. Aver'yanova et al., “Action of intense light beams on the surface of a metal,” Zh. Prikl. Mekh. Tekh. Fiz., No. 6, 82–83 (1965).
I. Ya. Dekhtyar', V. S. Mikhalenkov, V. V. Pilipenko, and V. I. Silant'ev, “Study of processes accompanying annealing of a supersaturated aluminum-xenon solid solution,” in: Diffusion Processes in Metals [in Russian], Naukova Dumka, Kiev (1968), pp. 41–53.
L. N. Dobretsov and M. V. Gomoyunova, Emission Electronics [in Russian], Nauka, Moscow (1966).
A. S. Drachinskii, A. E. Kushevskii, A. V. Perepelkin, et al., “Effect of the porosity on the fracture toughness of sintered iron,” in: Physics of Fracture [in Russian], IMP, Ukrainian SSR Academy of Sciences Press, Kiev (1980), pp. 303–384.
N. V. Dubovitskaya, S. N. Zakharov, and L. N. Larikov, “Evolution of the dislocation structure of molybdenum single-crystals owing to an isolated electric discharge,” Fiz. Khim. Obrab. Mater., No. 3, 128–133 (1980).
D. G. Evseev, Formation of the Properties of Surface Layers Accompanying Abrasive Treatment [in Russian], Saratov Univ. Press (1975).
L. E. Ershova, “Mechanism of laser hardening of parts,” Izv. Vyssh. Uchebn. Zaved., Cher. Metall., No. 3, 96–100 (1979).
V. A. Zhilyaev, V. V. Fedorenko, and G. P. Shveikin, “Mechanism for formation of a coaxial structure in titanium carbide and carbonitride based alloys,” in: 5th International Conference on Powder Metallurgy (1978), Vol. 2. pp. 189–200.
V. A. Zhorin, N. I. Alekseev, I. N. Groznov, et al., “Destruction of metal particles and the initial stages of formation of molecular complexes of metals with layered compounds under the action of high pressure and shear strains,” Dokl. Akad. Nauk SSSR,266, No. 2, 391–393 (1982).
S. N. Zhurkov, “Physical foundation of strength,” Fiz. Tverd. Tela,22, No. 11, 3344–3349 (1980).
E. A. Zhurakovskii, T. N. Bondarenko, and I. M. Frantsevich, “Comparison of experimental and theoretical data on the electronic structure of VN and VC,” Izv. Akad. Nauk SSSR, Neorg. Mater.,12, No. 3, 414–419 (1976).
L. F. Golovko et al., “Characteristic features of the hardening of iron-carbon alloys by high-power continuous CO2 laser radiation,” Elektron. Obrab. Mater., No. 6, 26–30 (1980).
A. S. Zingerman, “Role of Joule-Lenz heat in electric erosion of metals,” Zh. Tekh. Fiz.,25, No. 11, 1931–1934 (1955).
V. I. Zitka, “Effect of the physical properties of the electrode material on the transport of materials accompanying short concentrated discharges in a dielectric medium,” Chekhosl. Fiz. Zh.,3, 94–96 (1963).
B. N. Zolotykh, Electric-Spark Contact Method for Hardening Metal Surfaces [in Russian], Gosénergoizdat, Moscow (1955).
B. N. Zolotykh, “Mechanism of electric erosion in a liquid dielectric medium,” Zh. Tekh. Fiz.,29, No. 12, 1484–1486 (1959).
B. N. Zolotykh, “Basic questions of the qualitative theory of electric-spark treatment in liquid dielectric medium,” in: Problems in Electric Treatment of Materials [in Russian], USSR Academy of Sciences Press, Moscow (1962), pp. 5–43.
B. N. Zolotykh, “Basic questions in the theory of electric erosion in a pulsed discharge in a liquid dielectric medium,” Author's Abstract of Doctoral Dissertation in Technical Sciences, Moscow Institute of Electronic Machine Building, Moscow (1968).
B. N. Zolotykh, A. I. Marchuk, V. D. Zhvostikova, et al., “Study of the structure of tungsten single-crystals subjected to electric-erosion treatment,” in: Metallic Single Crystals [in Russian], Nauka, Moscow (1976), pp. 175–180.
B. N. Zolotykh, A. I. Marchuk, S. V. Nikiforov, et al., “Kinetic stability of thermodynamically unstable atomic mixtures prepared in a pulsed spark discharge,” Elektron. Obrab. Mater., No. 3, 24–27 (1977).
G. P. Ivanov, Technology of Electric-Spark Hardening of Tools and Machine Parts [in Russian], Mashgiz, Moscow (1961).
V. M. Ivanova, V. N. Kalinina, L. A. Nemusheva, et al., Mathematical Statistics [in Russian], Vysshaya Shkola, Moscow (1981).
É. P. Ignatenko, A. D. Verkhoturov, and M. Z. Markman, “Formation of the surface layer accompanying electric-spark alloying with easy-melting metals,” Elektron. Obrab. Mater., No. 3, 18–20 (1979).
A. N. Ierusalimskaya, V. I. Samoilov, and P. I. Ulyakov, “Structure and change in materials induced by laser light pulses,” Fiz. Khim. Obrab. Mat., No. 4, 26–34 (1968).
N. I. Il'chenko, E. M. malyshev, Yu. D. Pankrat'ev, and G. I. Golodets, “Binding energy of oxygen on the surface of transition-metal carbides and their catalytic activity,” Kinet. Katal.,19, No. 3, 629–644 (1978).
A. V. Belotskii et al., “Study of the possibility of laser alloying of the surface of iron with molybdenum,” Fiz. Khim. Obrab. Mater., No. 3, 24–27 (1977).
A. P. Danilenko et al., “Study of the possibility of additional alloying of R18 steel with the help of a laser beam,” Fiz. Khim. Obrab. Mater., No. 2, 22–26 (1972).
N. S. Goryachev et al., “Study of laser-induced increase in the hardness and wear resistance of steels,” Fiz. Khim. Obrab. Mater., No. 2, 42–44 (1974).
G. A. Anisovich et al., “Study of the possibility of laser hardening of piston AL25 aluminum alloy,” Izv. Akad. Nauk BSSR, Ser. Fiz.-Tekh. Nauk, No. 1, 57–59 (1979).
H. S. Carslaw and J. C. Jaeger, Conduction of Heat in Solids, Clarendon Press, New York (1986).
N. G. Kavavina and G. V. Spival, “Electron-microscopic study of structural changes accompanying electroerosion,” Izv. Akad. Nauk SSSR, Ser. Fiz.,15, No. 2, 72–76 (1951).
I. N. Kidin, “Mechanisms, for formation of austenite accompanying rapid heating,” Dokl. Akad. Nauk SSSR,106, No. 6, 1019–1023 (1956).
V. S. Kovalenko, A. I. Strizhak, and N. I. Prikhod'ko, “Surface hardening of parts with the help of a laser,” Tekhnol. Org. Pr-va, No. 7, 47–49 (1975).
V. S. Kovalenko and L. F. Golovko, “Hardening of tool materials with a decrease in the tungsten content under conditions of laser irradiation,” in: Problems in the Development and Assimilation of High-Productivity Cutting Tool with a Low Tungsten Content [in Russian], Georgian Polytechnic Institute Press, Tbilisi (1977), pp. 89–91.
V. S. Kovalenko and L. F. Golovko, “Evaluation of the technological parameters of the process of hardening of steel with continuous CO2 laser radiation,” Elektron. Obrab. Mater., No. 4, 77–81 (1980).
V. S. Kovalenko, A. I. Bezykornov, and L. F. Golovko, “Stress state of the surface layers of laser hardened materials,” Elektron. Obrab. Mater., No. 2, 34–37 (1980).
V. S. Kovalenko, L. F. Golovko, G. V. Merkulov, and A. I. Strizhak, Laser Hardening of Parts [in Russian], Tekhnika, Kiev (1981).
V. S. Kovalenko and L. F. Golovko, “Increasing the wear resistance of metal-cutting tools with the help of laser radiation,” Tekhnol. Org. Pr-va, No. 2, 42–46 (1981).
V. S. Kovalenko and V. S. Chernenko, “Study of the process of obtaining microopenings with a laser beam,” Tekhnol. Avtomatizatsiya Mashinostr., No. 5, 26–32 (1968).
V. V. Korneev, F. K. Kosyrev, S. F. Moryashchev, and A. A. Ukradishenko, “Some dependences of laser heat treatment,” Fiz. Khim. Obrab. Mater., No. 3, 3–6 (1980).
I. I. Kornilov and V. V. Glazova, Interaction of Transition Group Refractory Metals with Oxygen [in Russian], Nauka, Moscow (1967).
B. I. Kostetskii, Wear Resistance of Machine Parts [in Russian], Mashgiz, Moscow (1950).
B. I. Kostetskii, I. G. Nosovskii, A. K. Karaulov, et al., Surface Strength of Materials under Friction [in Russian], Tekhnika, Kiev (1976).
F. K. Kosyrev and V. S. Kraposhin, “Use of existing thermophysical estimates for development of laser heat-treatment parameters,” Poverkhnost', Fiz. Khim., Mekh., No. 9, 118–123 (1983).
E. G. Kotikova, “Effect of shot peening on the microstructure of steel,” in: Metal Science and Heat Treatment [in Russian], No. 1, Mashgiz, Moscow (1954), pp. 73–93.
V. S. Kraposhin, “Treatment of the surface of metallic materials with laser radiation,” Poverkhnost', Fiz., Khim., Mekh., No. 3, 1–12 (1982).
E. A. Krasyuk, “Study of some processes accompanying electric treatment of metals,” Author's Abstract of Doctoral Dissertation, Technical Sciences, Zhukovskii Air Force Engineering Academy, Moscow (1950).
E. A. Krasyuk, Physical Processes at the Foundation of Electric Treatment Methods [in Russian], Mashgiz, Moscow (1951).
I. I. Krzhanovskii, I. R. Venatovskii, E. I. Rivkin, et al., “Use of high-speed motion picture photography to study the basic characteristics of the process of contact-spark alloying,” Tr. LITMO, No. 78, 76–83 (1974).
A. P. Krasavin and Yu. V. Tikhonenko, “Effect of laser radiation parameters on the structure and properties of tungsten-free BLS steel,” in: Abstracts of Reports at the Scientific Technical Conference of the Republics on the Development and Use of Laser Technique and Technology in Machine and Instrument Building, Kiev Polytechnical Institute Press, Kiev (1985), p. 56.
M. A. Krishtal, A. A. Zhukov, and A. N. Kokora, Structure and Properties of Laser-Treated Alloys [in Russian], Metallurgiya, Moscow (1973).
K. I. Krylov, V. T. Prokopenko, and A. S. Mitrofanov, Application of Lasers in Machine and Instrument Building [in Russian], Nashinostroenie, Leningrad (1978).
V. V. Kudinov, Plasma Coatings [in Russian], Nauka, Moscow (1977).
G. G. Kudryumova, Yu. V. Mil'man, and V. I. Trefilov, “Classification of micromechanisms of fracture by type,” Metallofizika,1, No. 2, 55–62 (1979).
B. R. Lazarenko and N. I. Lazarenko, “Electric-spark method for treating metals,” in: Electric-Spark Treatment of Metals [in Russian], No. 1, USSR Academy of Sciences Press, Moscow (1957), pp. 117–129.
B. R. Lazarenko and N. I. Lazarenko, Electric-Spark Treatment of Current-Conducting Materials [in Russian], USSR Academy of Sciences Press, Moscow (1958).
B. R. Lazarenko, A. I. Gorodetskii, and K. Ya. Krasnolob, “Dynamic theory of ejection of electrode material by short electric pulses and laws governing the formation of shock craters,” Elektron. Obrab. Mater., No. 2, 18–23 (1969).
B. R. Lazarenko and N. I. Lazarenko, “Electric theory of electric-spark erosion of metals,” in: Problems in Electric Treatment of Materials [in Russian], USSR Academy of Sciences Press, Moscow (1962), pp. 44–51.
B. R. Lazarenko, A. E. Gitlevich, S. P. Fursov, et al., “Some characteristics of electric-spark alloying of titanium with aluminum and nickel,” Elektron. Obrab. Mater., No. 1, 29–32 (1974).
N. I. Lazarenko, “Mechanism of formation of coatings with electric-spark alloying of metallic surfaces,” Elektron. Obrab. Mater., No. 1, 49–53 (1965).
V. S. Kovalenko et al., “Laser hardening of contact surfaces of metallic seals,” Elektron. Obrab. Mater., No. 6, 77–79 (1975).
F. F. Vodovatov et al., Lasers in Technology [in Russian], Énergiya, Moscow (1975).
V. S. Kovalenko et al., “Laser hardening of tools,” Inform. Listok No. 80-0443, Series 10a, No. 4 (1980).
V. S. Kovalenko et al., “Laser hardening and alloying of the working surfaces of machine parts,” in: Brief Abstracts of Reports at the 8th All-Union Scientific-Industrial Conference Él'fa-77, Leningrad (1977), pp. 184–185.
L. N. Larikov, M. E. Gurvich, N. V. Dubovitskaya, and L. M. Kupchenko, “Kinetics of swelling of aluminum samples containing a rare gas,” in: Diffusion Processes in Metals [in Russian], Naukova Dumka, Kiev (1968), pp. 32–48.
L. N. Larikov, V. V. Omel'yanenko, and V. M. Tyshkevich, “Heat resistance of alloys in the system Ni−Al−O,” Zashch. Met., No. 1, 143–145 (1983).
Yu. M. Lakhtin, Nitriding of Steel [in Russian], Nashgiz, Moscow (1943).
L. V. Leb, Basic Processes of Electric Discharges in Gases [in Russian], Gostekhizdat, Moscow (1950).
S. V. Lebedev, “Mechanism of treatment of materials by the electric-spark method,” Izv. Akad. Nauk ArmSSR, Fiz.-Mat., Estestv. Tekh. Nauki,2, No. 1, 33–49 (1950).
A. I. Levin, G. A. Komov, and P. V. Kochetkov, “Hardening of tools with the help of surface quenching with laser pulses,” Stanki Instrument [in Russian] (1978),
G. V. Levchenko, “Metal-ceramic contacts with high switching capability,” Author's Abstract of Candidate's Dissertation, Technical Sciences, Institute of Applied Mechanics, Academy of Sciences of the Ukrainian SSR, Kiev (1965).
A. E. Leikin and B. I. Rodin, Materials Engineering [in Russian], Vysshaya Shkola, Moscow (1971).
A. M. Lemeshko, “Study of the erosion of electrodes accompanying electric-spark treatment of refractory metals and their compounds with carbon, boron, and nitrogen,” Author's Abstract of Candidate's Dissertation, Technical Sciences, Institute of Applied Mechanics of the Ukrainian SSR Academy of Sciences, Kiev (1971).
M. N. Libenson, V. L. Volod'kina, and K. I. Krylov, “Laser heating of metals in an oxidative atmosphere,” Fiz. Khim. Obrab. Mater., No. 5, 145–146 (1973).
T. N. Loladze, Wear of Cutting Tools [in Russian], Mashgiz, Moscow (1958).
A. V. Lykov, Theory of Heat Conduction [in Russian], Vysshaya Shkola, Moscow (1967).
I. N. Lyubarskii and L. S. Palatnik, Metal Physics of Friction [in Russian], Metallurgiya, Moscow (1976).
B. A. Lyashenko, “Criteria for adhesion-cohesion strength equivalence and heat resistance of protective coatings,” Probl. Prochn., No. 5, 114–117 (1980).
S. L. Mandel'shtam and S. N. Raiskii, “Mechanism of electric erosion of metals,” Izv. Akad. Nauk SSSR, Ser. Fiz.,13, No. 5, 549–565 (1949).
I. F. Marchenko, V. A. Tspulin, and V. L. Shchegolev, “Electric-spark hardening of the walls of aluminum pistons,” Dvigatelestroenie, No. 4, 31–33 (1980).
V. Merl, Electric Contact [in Russian], Gosénergoisdat, Moscow (1962).
A. K. Mindyuk, Yu. K. Babei, and I. P. Vygovskii, “Nature and properties of white layers,” Fiz.-Khim. Mekh. Mater., No. 9, 81–84 (1974).
L. I. Mirkin and N. F. Pilipetskii, “Hardening of steels under the action of a laser beam,” Metalloved. Term. Obrab. Met., no. 4, 70–72 (1966).
L. I. Mirkin and N. F. Pilipetskii, “Physical nature of the hardening of steels under the action of light pulses,” Dokl. Akad. Nauk SSSR,172, No. 3, 580 (1967).
L. I. Mirkin, Physical Foundations of the Treatment of Metals with Laser Beams [in Russian], Moscow State Univ. Press (1975).
V. V. Mikhailov, “Study of the characteristics of electric-spark alloying of titanium and its alloys,” Author's Abstract of Candidate's Dissertation, Technical Sciences, Institute of Applied Mechaics, Ukrainian SSR Academy of Sciences Press, Kiev (1977).
M. K. Mitskevich, A. I. Bunin, I. A. Bakuto, et al., “Study of the dynamics of the process of electrode material transfer in a strong-current pulse discharge,” Elektron. Obrab. Mater., No. 4, 18–19 (1977).
K. A. Michurina, I. N. Prilezhaeva, and G. V. Spivak, “Electron-microscopic study of structural changes in aluminum accompanying electroerosion,” Izv. Akad. Nauk SSSR, Ser. Fiz.,15, No. 4, 418–423 (1951).
I. Z. Mogilevskii and S. A. Chepovaya, “Metallographic study of the surface layer of steel after electric-spark treatment,” in: Electric-Spark Treatment of Metals [in Russian], No. 1, USSR Academy of Sciences Press, Moscow (1957).
I. Z. Mogilevskii, “Structural changes in iron and steel after electric-spark treatment of the surface with graphite,” in: Problems of Electric Treatment of Materials [in Russian], USSR Academy of Sciences of Sciences Press, Moscow (1960), pp. 86–97.
V. N. Morozenko, I. P. Onufrienko, L. N. Gasik, et al., “Preparation of polymetallic composite materials with electric-spark alloy,” Elektron. Obrab. Mater., No. 4, 8–12 (1972).
V. N. Morozenko, V. S. Nazarets, V. I. Timoshenko, et al., “Thermal force action of electric discharge in electric-spark alloying,” Elektron. Obrab. Mater., No. 4, 24–26 (1973).
S. F. Moryashev, A. A. Kislitsyn, and F. K. Kosyrev, “Optimization of the parameters of the process of CO2-laser quenching of steel,” Fiz. Khim. Obrab. Mater., No. 1, 94–98 (1984).
I. M. Mukha, “Development and study of new materials for the treatment electrodes for electric-spark stands,” Author's Abstract of Candidate's Dissertation, Technical Sciences, Institute of Applied Mechanics of the USSR Academy of Sciences Press, Kiev (1967).
R. N. Nagaibekov, S. V. Starodubtsev, and A. N. Yagudaev, “Study of the erosion phenomena in vacuum short-circuit arcs,” in: Electrical Contacts [in Russian], Energiya, Moscow (1967), pp. 106–111.
K. K. Namitokov, “Relation of the vapor and liquid phases in the products of electric erosion of metals,” Ukr. Fiz. Zh.,6, No. 4, 556–564 (1962).
K. K. Namitokov, “Problems of erosion and near-electrode processes in low-voltage strong-current electrical apparatus and other setups,” Author's Abstract of Doctoral Dissertation, Technical Sciences, Kharkov Polytechnic Institute, Kharkov (1970).
V. D. Natsik and L. G. Potemkina, “Characteristic features of the electronic spectrum in metals with dislocations,” Zh. Eksp. Teor. Fiz.,79, No. 6, 2398–2411 (1980).
V. M. Zhirovetskii et al., “Some characteristic features of the changes in the properties of alloys after treatment with a laser beam,” Fiz. Khim. Obrab. Mater., No. 1, 80–83 (1972).
I. G. Nekrashevich and I. A. Bakuto, “Problem of the present status of theoretical research on electric erosion of metals,” in: Electric-Spark Treatment of Metals [in Russian], USSR Academy of Sciences Press, Moscow (1963), pp. 24–28.
S. A. Nemnonov, É. Z. Kurmaev, K. M. Kolotova, and A. É. Men'shikov, “X-ray spectra and electronic structure of metallike compounds of transition metals,” Fiz. Met. Metalloved.,25, No. 6, 1064–1071 (1968).
S. B. Nizhnik, “Tempering of secondary structures of carbon steel formed with rapid action of high temperatures and pressures,” Fiz. Met. Metalloved.,13, No. 6, 879–886 (1960).
I. I. Novikov, Theory of Heat Treatment of Metals [in Russian], Metallurgiya, Moscow (1978).
A. N. Kokora et al., “Laser treatment of steel,” Metalloved. Term. Obrab. Met., No. 2, 41–42 (1966).
V. S. Kovalenko et al., “Effect of the dimensional factor on the hardening of parts with continuous laser radiation,” Elektron. Obrab. Mater., No. 1, 23–25 (1986).
Yu. I. Shvets et al., “Basic directions in research on nonlinear mathematical models of heat-transfer processes accompanying the action of concentrated energy fluxes on materials,” Fiz.-Khim. Mekh. Mater., No. 3, 70–73 (1986).
L. S. Palatnik, “Transformation in the surface layer under the action of electric discharges,” Izv. Akad. Nauk SSSR, Ser. Fiz.,15, No. 4, 467–476 (1951).
L. S. Palatnik, “Phase transformations accompanying electric-spark treatment of metals and experience in establishing criteria for the observed interactions,” Dokl. Akad. Nauk SSSR,89, No. 3, 455–458 (1953).
I. G. Parkhilovskii and A. F. Buinov, “Spring profiles of special sections and their advantages,” Vestn. Mashinostr., No. 2, 19–26 (1954).
Yu. N. Petrov, I. I. Safronov, and Yu. P. Keloglou, “Structural changes in metals after electric-spark alloying,” Elektron. Obrab. Mater., No. 2, 29–34 (1965).
V. M. Pikulo and Yu. S. Ol'shevskii, “Use of high-speed heating and deep cooling for increasing the life of cutting tools,” Metallurgiya, No. 13, 179–180 (1979).
A. N. Pilyankevich, A. N. Martynenko, A. D. Verkhoturov, et al., “Electron-microscopic studies of the structure of hardened alloys with electric-spark alloying of titanium alloy BT-18,” Elektron. Obrab. Mater., No. 5, 40–42 (1979).
G. V. Plyatsko and M. I. Moisa, “Effect of laser treatment conditions on the structure of steel,” Fiz. Khim. Obrab. Mater., No. 2, 107–108 (1972).
V. N. Poduraev, Working of Heat-Resistant and Stainless Materials by Cutting [in Russian], Vysshaya Shkola, Moscow (1965).
V. N. Poduraev and V. S. Kamalov, Physical-Chemical Treatment Methods [in Russian], Mashinostroenie, Moscow (1973).
V. A. Poznyakov and V. A. Solov'ev, “Propagation and interaction of packing defects in crystals under shock loading,” Dokl. Akad. Nauk SSSR,266, No. 2, 338–342 (1982).
Yu. I. Shvets et al., “Approximate approach to the evaluation of the thermal state of parts accompanying hardening of the material with a moving concentrated energy source,” Prom. Teplotekh., No. 2, 55–59 (1985).
E. A. Rabinovich, “Friction and wear of self-lubricating metallic materials,” Probl. Treniya Smazki, No. 2, 81–85 (1975).
A. Yu. Ishlinskii (ed.), Fracture: Microscopic and Macroscopic Foundations of the Mechanics of Fracture [Russian translation], Vol. 1, Mir, Moscow (1973).
M. S. Rakhmarova and Ya. G. Mirer, Effect of Technological Factors on the Reliability of Gas-Turbine Blades [in Russian], Mashinostroenie, Moscow (1966).
V. I. Rakhovskii and A. M. Yagudaev, “Mechanism of electrode fracture in a pulsed discharge in a vacuum,” Zh. Tekh. Fiz.,39, No. 2, 317–320 (1969).
E. I. Ritvin, D. S. Tikochinskii, O. V. Padalko, et al., “Technology of electric-spark alloying of the surface of platinum and its alloys with gold,” Elektron. Obrab. Mater., No. 4, 16–17 (1970).
P. R. Rodin, Metal-Cutting Tools [in Russian], Vishcha Shkola, Kiev (1974).
N. N. Rykalin, Thermal Foundations of Welding [in Russian], USSR Academy of Sciences Press, Moscow (1947), Part 1.
N. N. Rykalin, Calculation of Thermal Processes in Welding [in Russian], Mashgiz, Moscow (1951).
N. N. Rykalin and A. A. Uglov, “Calculation of the heating of metals by CO2 laser radiation,” Svaroch. Pr-vo, No. 7, 1–3 (1973).
N. N. Rykalin, A. A. Uglov, and A. N. Kokora, “Effect of high-power CO2-laser radiation on iron and its alloys,” Fiz. Khim. Obrab. Mater., No. 1, 3–9 (1974).
N. N. Rykalin, A. A. Uglov, and A. N. Kokora, Laser Treatment of Materials [in Russian], Mashinostroenie, Moscow (1975).
N. N. Rykalin, I. V. Zuey, and A. A. Uglov, Fundamentals of Electron-Beam Treatment of Materials [in Russian], Mashinostroenie, Moscow (1978).
N. N. Rykalin, A. A. Uglov, and I. Yu. Smurov, “Three-dimensional nonlinear problems of heating of metals with laser radiation,” Fiz. Khim. Obrab. Mater., No. 2, 3–13 (1979).
J. Redy, Effect of High-Power Laser Radiation [Russian translation], Mir, Moscow (1974).
J. Redy, “Treatment of materials (review),” Trans. IEEE,70, No. 6, 7–20 (1982).
G. V. Samsonov, A. D. Verkhoturov, G. A. Bovkun, and V. V. Sychev, Electric-Spark Alloying of Metallic Surfaces [in Russian], Naukova Dumka, Kiev (1975).
G. V. Samsonov and A. N. Lemeshko, “Characteristic features of electric-spark fracture of refractory metals with carbon and boron,” Elektron. Obrab. Mater., No. 6, 3–6 (1969).
G. V. Samsonov, V. I. Kovtun, I. I. Timofeeva, and A. A. Rogozinskaya, “Nature of the high microhardness of friction-hardened surfaces,” Fiz.-Khim. Mekh. Mater.,9, No. 4, 26–30 (1973).
G. V. Samsonov, V. K. Vitryanyuk, N. S. Ravskaya, et al., “Physical-chemical properties of and prospects for application of tungsten-free hard alloys,” in: Technology of Fabrication of Parts from Hard-Alloy Mixtures [in Russian], Naukova Dumka, Kiev (1973), pp. 42–46.
G. V. Samsonov, Yu. M. Goryachev, L. N. Okhremchuk, and I. A. Podchernyaeva, “Electronic energy spectrum and physical properties of transition-metal carbides in the region of homogeneity,” Izv. Vyssh. Uchebn. Zaved., Fiz., No. 1, 42–50 (1977).
I. I. Safronov, “Structure of the surface layer after electric-spark alloying of steel,” Izv. Akad. Nauk SSSR, Ser. Fiz.-Tekh. Mat. Nauk, No. 5, 30–35 (1964).
I. I. Safronov, “Study of the possibility of using carbides and borides of titanium, niobium, zirconium, and chromium as electrodes for electric-spark alloying,” Author's Abstract of Candidate's Dissertation, Technical Sciences, Institute of Applied Mechanics of the Ukrainian SSR Academy of Sciences, Kiev.
N. I. Siman, I. A. Podchernyaeva, and M. D. Smolin, “Emission-adsorption properties of refractory silicide and boride phases in the flow of products of vaporization of impregnated aluminum cathode,” Elektron. Tekh., Ser. 6, Mater., No. 6, 36–41 (1979).
V. A. Snezhkov, A. D. Verkhoturov, A. N. Krasnov, et al., “Status and prospects for development of the method of electric-spark alloying,” Elektrofiz. Elektrokhim. Metody Obrab., No. 4, 1–6 (1980).
I. S. Stekol'nikov, “Study of the initial stage of the discharge with very small electrode gaps,” Izv. Akad. Nauk SSSR, Otd. Tekh. Nauk, No. 7, 985–995 (1950).
K. I. Taganov, Spectral Analysis of Metals and Alloys with Preselection of Samples [in Russian], Metallurgiya, Moscow (1968).
G. N. Tarkhov, “Treatment of metals with a focused laser beam: applications, technology, and equipment,” in: Experience in Using Electrophysical and Electrochemical Methods of Treatment in Industry [in Russian], Experimental Scientific-Research Institute of Metal-Cutting Tools, Moscow (1964), pp. 42–46.
V. V. Frolov (ed.), Theoretical Foundations of Welding [in Russian], Vysshaya Shkola, Moscow (1970).
V. A. Terekhova, V. I. Kruglov, and N. N. Bragin, “Effect of defects of the crystalline structure on chemical activity,” Izv. Akad. Nauk SSSR, Neorg. Mater.,19, No. 3, 398–403 (1982).
V. I. Trefilov, Yu. V. Mil'man, and S. A. Firstov, Physical Foundations of the Strength of Refractory Metals [in Russian], Naukova Dumka, Kiev (1975).
A. A. Uglov, V. V. Ivanov, A. I. Tunikov, and I. Yu. Smurov, “Calculation of the temperatures in the zone of action of concentrated energy fluxes on a metal,” Prom. Teplotekh.,2, No. 2, 68–72 (1980).
A. A. Uglov and O. I. Isaeva, “Calculation of the rate of heating of metals exposed to laser radiation,” Fiz. Khim. Obrab. Mater., No. 2, 23–28 (1976).
Ya. S. Umanskii and V. A. Lyashenko, “Conditions of adhesion and cohesion strength equivalence of thermally stable coatings,” in: Space Research in the Ukraine [in Russian], No. 6, Naukova Dumka, Kiev (1975), pp. 58–64.
V. D. Kal'ner et al., “CO2-laser hardening of the aluminum alloy AL4,” Poverkhnost'. Fiz., Khim., Mekh., No. 12, 131–134 (1982).
V. F. Fedorov, D. K. Khakimova, E. G. Kalashnikov, et al., “Analysis of the fine structure of ultradispersed materials,” Dokl. Akad. Nauk SSSR,269, No. 1, 885–888 (1983).
I. M. Fedorchenko and L. I. Pugina, Composite Sintered Antifriction Materials [in Russian], Naukova Dumka, Kiev (1980).
N. M. Fialko, “Study of the temperature of bodies in the presence of moving concentrated energy sources,” Author's Abstract of Candidate's Dissertation, Technical Sciences, Institute of Engineering Thermal Physics of the Ukrainian SSR Academy of Sciences, Kiev (1980).
V. N. Gridnev et al., Physical Foundations of Electrothermal Hardening of Steel [in Russian], Naukova Dumka, Kiev (1973).
V. S. Fomenko and I. A. Podchernyaeva, Handbook of Emission and Adsorption Properties of Substances and Materials [in Russian], Atomizdat, Moscow (1975).
N. K. Foteev, Technology of Electric-Spark Treatment [in Russian], Mashinostroenie, Moscow (1980).
S. P. Fursov, A. M. Paramonov, I. V. Dobynda, and A. V. Semenchuk, Power Supplies for Electric-Spark Alloying [in Russian], Shtiintsa, Kishinev (1978).
M. Khansen and K. A. Anderko, Structure of Binary Alloys [in Russian], Metallurgiya, Moscow (1962).
A. I. Kharlamov and V. G. Aleshin, “Surface state of the compounds of d metals with nitrogen, boron, and silicon,” Izv. Akad. Nauk SSSR, Neorg. Mater.,16, No. 3, 445–449 (1980).
R. Holm, Electric Contacts [Russian translation], IL, Moscow (1964).
M. M. Khrushchov and M. A. Babichev, Study of the Wear of Metals [in Russian], Ukrainian SSSR Academy of Sciences Press, Kiev (1960), pp. 204–222.
I. N. Chaporova and K. S. Chernyavskii, Structure of Sintered Hard Alloys [in Russian], Metallurgiya, Moscow (1975).
M. Kh. Shorshorov and É. S. Karakozov, “Problem of the need for activation in welding of a metal in the solid state,” Svaroch. Pr-vo, No. 1, 51–53 (1971).
A. S. Shulikov T. M. Zimkina, V. A. Fomichev, and V. S. Nashpor, “X-ray spectral studies of the carbides and nitrides of group IV and V transition metals,” Fiz. Tverd. Tela,18, No. 3, 793–796 (1976).
L. M. Shestopalov, “Laser heat treatment and fast laser quenching of metals,” in: Physical-Technical Foundations of Laser Technology [in Russian], LDNTP, Leningrad (1970), pp. 80–83.
Y. Arata, H. Maruo, and I. Miyamoto, “Application of laser for materials processing —heat flow in laser hardening,” Osaka (1978). a) Y. Arata, F. Matsuda, and K. Nabata, “Quench hardening and cracking in electron beam weld metal carbon and alloy hardenable steels,” Trans. JWRI,1, No. 1, 39–51 (1972).
Y. Arata and I. Miyamoto, “Some fundamental properties of high power laser beam as a heat source. (Rep. 3). Metal heating by laser beam,” Trans. JWS,3, No. 1, 163–180 (1972).
M. Barash and C. S. Kahlok, “Experiments with electric-spark toughening,” Int. J. Mach. Tool Des. Res.,4, No. 1, 1–81 (1964).
R. B. Barber and D. L. Linor, in: Rec. 10th Symposium on Electron-Ion and Laser Beam Technology, New York (1969), pp. 241–246.
Basis of Laser Heat Treating, CRL Inc., HLPK, New York (1982).
W. Böhme, “Standzeiter Hohund von werkengen Mittels des Electrofume-kenverfahrens,” Fertigungstechn. und Betiol, No. 12, 757–760 (1964).
E. M. Breinan, B. H. Kear, and S. H. Banas, “Processing with multikilowatt lasers,” UTRC (1976), pp. 1–22.
C. Wick, “Laser hardening,” Manufact. Eng., June (1976), pp. 35–37.
H. E. Cline and T. R. Anthony, “Heat treating and melting material with a scanning laser or electron beam,” J. Appl. Phys.,48, No. 9, 3895–3900 (1977).
M. J. Goldshmit, “The constitution of spark-treated metals,” Iron Steel, No. 24, 469–471 (1959).
S. L. Engel, “Heat treating with lasers,” Am. Mach., May, 107–111 (1976).
A. Hagström, Z. Yohanson, and B. Yocobson, “Structure of single crystal titanium carbide, studied by soft x-ray and ultraviolet photoelectron spectroscopy,” Solid-State Commun.,19, No. 7, 647–649 (1976).
E. Hanke, “Standzeiterhöhung durch partiells im Funken,” Feingerätetechnik,6, No. 3, 124–125 (1957).
W. S. Kowalenko and L. F. Golowko, “Erfhohung der Zuverlassigkeit des Wekzeuges durch Anwendung von Lasertechnologien” in: Fachtagung AURPO-84, Tagungsber. Karl-Marx-Stadt (1984), No. 5, Vol. 1, pp. 283–286.
A. J. Ivanovsky, V. A. Gubanov, and O. P. Schveikin, “Electronic structure and chemical bonding in nonstoichiometric compounds of refractory transition metals of the IVa, Va subgroups,” J. Less-Common Met.,78, No. 1, 1–19 (1981).
C. S. Kahlok, H. J. Baker, C. E. Noble, et al., “Electric spark toughening of cutting tools and steels components,” Int. J. Mach. Tool Des. Res.,10, No. 1, 95–121 (1970).
V. S. Kovalenko and Y. Namba, “Some aspects of material hardening with pulsed laser beams,” in: Proceedings of the 19th International MTDR Conference, Manchester (1978), pp. 591–596.
B. A. Kovensky and G. V. Samsonov, Boron and Refractory Borides, Springer-Verlag, Berlin (1977).
S. Lee and T. Aryasu, “A study on the surface hardening of metal materials by the use of high temperature plasma,” July 29 (1977), p. 25.
E. Ohmuru, “Hardening in laser processing,” Doctoral Thesis, Osaka University (1984).
M. Ross, Laser Application, Vol. 2, Academic Press, New York (1974), pp. 55–129.
G. V. Samsonov, A. D. Wierchoturov, G. A. Bovkun, et al., “Technologia electroiskrovego wtapia skladnicow stopowych,” Electronica, No. 2, 509–516 (1972).
G. Schreter, “Erhohung der Standzeit Werkzende durch Auttunken,” Machinenbau,15, No. 12, 555–558 (1969).
K. Schwazz and A. Neckel “Ber Bunsenges Berechnung cler Bontgenemission spectren von VC und BN,” Phys. Chem., No. 11, 1071–1077 (1975).
E. D. Seamen and E. V. Locke, “Metal working capability of a high power laser,” Soc. Auto. Eng., No. 440864, 1–14 (1974).
I. S. Spalding “High power lasers for processing of materials, a comparison of available systems,” Opt. Laser Technol., February, 29–32 (1978).
I. J. Spalding, “Laser applications and operational requirements,” Opt. Laser Technol., December, 263–272 (1979).
V. S. Kovalenko, K. Enami, Y. Arata, and S. Nenno, “The approach to understand hardening mechanism at laser beam irradiation of material,” J. High Temp. Soc.,4, No. 6, 280–286 (1978).
H. Tsuwa, Y. Namba, and V. S. Kovalenko, “Surface alloying of materials with help of laser beam,” Proc. Jpn. Soc. Presic. Eng., July 20, 111–112 (1978).
N. C. Welch and P. E. Watts, “Spark-hardening of cutting tools, austenite formation and edge erosion,” J. Iron Steel Inst.,198, No. 1, 30–37, (1961).
C. H. Wick, “Carbide coating boosts life of high-speed steel,” Machinery,66, No. 8, 146–148 (1960).
E. H. Williams, “Theory of electric spark machining,” Elec. Eng.,71, 257–262 (1952).
K. Zanghammer, “Frasen Hochwarnfester Work-stoffe mit elektrofunkenverfestigten Snellarbeitsstahlwerkzeugen,” Ind. Ans.,93, No. 51, 1195–1196 (1971).
E. Zeilinski, “Einfub und praktische Anwendung der Legierungselemente bei Stahl und Gubeisen,” Technica (Suisse),15, No. 6, 538–540 (1966).
Additional information
Translated from Lazernoe i Élektro-érozionnoe Uprochnenie Materialov, pp. 3–274, 1986.
Rights and permissions
About this article
Cite this article
Kovalenko, V.S., Verkhoturov, A.D., Golovko, L.F. et al. Laser surface hardening and electric-spark surface hardening of materials. J Russ Laser Res 9, 1–175 (1988). https://doi.org/10.1007/BF01120344
Issue Date:
DOI: https://doi.org/10.1007/BF01120344