Summary
Based on field instrumentation in eight different coal mines representing varying depths and strata conditions, a relation for obtaining the critical convergence value has been established. In development heading for bord and pillar workings this relation can be used successfully to control the premature collapse of the roof. An empirical relation for rock load has been established. This can be utilized for optimum design of support system. The roofs have been categorized as stable, short-term stable and unstable. Proper attention should be provided for an unstable roof and the support design is to be changed before the convergence reaches the critical value.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Bieniawski, Z.T. (1979) The geomechanics classification in rock engineering applications, Proceedings of 4th International Congress of Rock Mechanics, Montreux, pp. 41–8.
Ghose, A.K. and Raju, N.M. (1981) Characterisation of rock massvis-à-vis application of rock bolting — modelling of Indian coal measures, Proceedings of 22nd US Symposium of Rock Mechanics, Massachusetts, pp. 422–7.
Venkateswarlu, V., Ghose, A.K. and Raju, N.M. (1989) Rock mass classification for design of roof supports — a statistical evaluation of parameters,Mining Science and Technology,8, 97–107.
Unal, E. (1983) Design guidelines and roof control standards for coal mine roofs, PhD thesis, The Pennsylvania State University.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Ghosh, C.N., Ghose, A.K. Estimation of critical convergence and rock load in coal mine roadways — an approach based on rock mass rating. Geotech Geol Eng 10, 185–202 (1992). https://doi.org/10.1007/BF00881171
Issue Date:
DOI: https://doi.org/10.1007/BF00881171