Abstract
An intensity-stabilisation system for an argon laser using an electro-optic modulator is described. We achieved a degree of stabilisation of up to 40 dB (factor of 100) for intensity fluctuations below a few kHz. The performance in this frequency range did not reach that expected from the available loop gain. We have identified two serious limiting factors to the performance of our system at low frequency: geometrical fluctuations and frequency fluctuations of the laser light.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
J.L. Hall: Private communications to J.H. on his original experiments with J.J. Snyder and experience with noise reduction systems. Such a system on a cw dye laser achieved >60 dB suppression from de to 10 kHz, >40 dB from 10 kHz to 100 kHz and >10 dB from 100 kHz to 1 MHz
Coherent Associates: Manual on Model 307, “Noise Eater”
J. Hough, S. Hoggan, G.A. Kerr, J.B. Mangan, B.J. Meers, G.P. Newton, N.A. Robertson, H. Ward, R.W.P. Drever:Lecture Notes Phys. 212, 204–212 (Springer, Berlin, Heidelberg 1984)
A. Yariv:Quantum Electronics, 2nd ed. (Wiley, New York 1975) Chap. 14
J.L. Hall, H.P. Layer, R.D. Deslattes: IEEE/OSA Conf. on Laser Engineering and Applications. Digest of Papers [IEEE Cat. No. 77 CH-1207.0] p. 45 (1977)
H.P. Layer: Appl. Opt.18, 2947–2949 (1979)
R.W.P. Drever, J.L. Hall, F.V. Kowalski, J. Hough, G.M. Ford, A.J. Munley, H. Ward: Appl. Phys. B31, 97–105 (1983)
A. Rudiger, R. Schilling, L. Schnupp, W. Winkler, H. Billing, K. Maischberger: Optica Acta28, 641–658 (1981)
B.J. Meers, G.P. Newton, R.W.P. Drever: In preparation
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Robertson, N.A., Hoggan, S., Mangan, J.B. et al. Intensity stabilisation of an argon laser using an electro-optic modulator —Performance and limitations. Appl. Phys. B 39, 149–153 (1986). https://doi.org/10.1007/BF00697412
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF00697412