Conclusions
Different physical methods were used to investigate the structure and composition of the diffusion zone at the interface of the titanium (VT6S)—steel (Kh18N10T) bimetal in relation to the rolling conditions and subsequent heat treatment.
The TiFe3 phase was found in the transition zone by the direct secondary ion-ion emission method.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
Literature cited
A. E. Vol, Structure and Properties of Binary Metallic Systems, [in Russian], Fizmatgiz (1962).
I. M. Pavlov and V. N. Brinza, Tsvetnye Metally, No. 11 (1961).
I. M. Pavlov and V. N. Brinza, Tsvetnye Metally, No. 4 (1961).
I. M. Pavlov and V. N. Brinza, Coll: Rolling Processes, Trans. MISiS, [in Russian], No. 40 Metallurgizdat, Moscow (1962).
I. M. Povlov and V. N. Brinza, Tsyvetnye Metally, No. 3 (1964).
F. E. Dolzhenkov and Yu. I. Krivonosov, Tsvetnye Metally, No. 6 (1964).
M. A. Gol'din et al., Zavod. Lab., No. 2 (1965).
G. K. Kharchenko et al., Avtomaticheskaya Svarka, No. 9 (1965).
Perona von Giovanni, R. Sesini, W. Nicodem, and R. Zoja, Z. Metallk.,58, No. 2 (1967).
V. M. Amonenko et al., Tsvetnye Metally, No. 12 (1967).
N. G. Boriskin and I. I. Kornilov, Coll: Reports of the Sixth Conference on Metal Chemistry, Metal Science, and Use of Titanium and Its Alloys [in Russian], Nauka, Moscow (1965).
D. A. Prokoshkin, Coll: Chemical and Thermal Treatments of Steel, Trans. MISiS [in Russian], Metallurgizdat (1938).
Additional information
Physicotechnical Institute of the Academy of Sciences UkrSSR. Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 3, pp. 44–47, March, 1969.
Rights and permissions
About this article
Cite this article
Abramenkov, A.D., Rybal'chenko, N.D. & Tron', A.S. Structure and phase composition of transition zone in titanium-stainless steel bimetal. Met Sci Heat Treat 11, 209–211 (1969). https://doi.org/10.1007/BF00658735
Issue Date:
DOI: https://doi.org/10.1007/BF00658735