Abstract
Froeze-etching (FE) and critical point drying (CPD) techniques were employed to prepare samples for investigating surface and bulk structures of polyvinyl alcohol (PVA) hydrogels by scanning electron microscopy. The hydrogels were obtained by freezing homogeneous solutions containing PVA polymer in either water or an aqueous solution of dimethyl sulfoxide (DMSO). An oriented porous structure was observed in the PVA hydrogel prepared without DMSO. The structure on the surface was found to be more porous than in the bulk for PVA hydrogels prepared from aqueous DMSO solutions. For given compositions of the hydrogels, samples prepared by FE technique showed a highly porous fibrillar structure on the surface, while those prepared by CPD technique showed a collapsed fibrillar structure with much less porosity. This marked difference indicates a collapse of the surface structure caused by the CPD technique. The CPD technique also led to significant reduction in porosity and loss of fibrillar structure in the bulk. Volume shrinkage of hydrogels caused by dehydration in ethanol may be responsible for the surface collapse as well as alteration of bulk structure. The FE technique reveals a more native structure of hydrogels than the commonly used CPD technique. However, it suffers from disadvantages such as charging and structural damage at high magnifications.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
Andrade J, King R, Gregonis D (1976) Probing the Hydrogel/Water Interface, In: Andrade J (ed) Hydrogels in Medical and Related Applications, ACS Symposium Series, Vol 31, Washington, DC, pp 206–224
Miller D, Peppas N (1986) Bulk Characterization and Scanning Electron Microscopy of Hydrogels of P(VA-co-NVP). Biomaterials 7:329–339
Blank Z, Reimschuessel A (1974) Structural Studies of Organic Gels by SEM. J Mater Sci 9:1815–1822
Yokoyama F, Masada I, Shimamura K, Ikawa T, Monobe K (1986) Morphology and Structure of Highly Elastic Poly(Vinyl Alcohol) Hydrogel Prepared by Repeated Freezing and Melting. Colloid Polym Sci 264:595–601
Urushizaki F, Yamaguchi H, Nakamura K, Numajiri S, Sugibayashi K, Morimoto Y (1990) Swelling and Mechanical Properties of Poly(Vinyl Alcohol) Hydrogels. International Journal of Pharmaceutics 58:135–142
Lozinski VI, Vainerman ES, Domotenko LV, Mamtsis AM, Titova EF, Belavtseva EM, Rogozhin SV (1986) Study of Cryostructurization of Polymer Systems VII. Structure Formation under Freezing of Poly(Vinyl Alcohol) Aqueous Solutions. Colloid Polym Sci 264:19–24
Watase M, Nishinary K (1988) Thermal and Rheological Properties of Poly(Vinyl Alcohol) Hydrogels Prepared by Repeated Cycles of Freezing and Thawing. Makromol Chem 189:871–880
Hyon SH, Cha WI, Ikada Y (1989) Preparation of Transparent Poly(Vinyl Alcohol) Hydrogel. Polymer Bulletin 22:119–122
Tong HM, Noda I, Gryte CC (1984) Formation of Anisotropic Ice-Agar Composites by Directional Freezing. Colloid Polym Sci 262:589–595
Komatsu M, Inoue T, Miyasaka K (1986) Light-Scattering Studies on the Sol-Gel Transition in Aqueous Solutions of Poly(Vinyl Alcohol) J Polym Sci 24:303–311
Rasmussen DH, MacKenzie AP (1968) Phase Diagram for the System Water-Dimethylsulphoxide. Nature 220:1315–1316
Ohkura M, Kanaya T, Kaji K (1992) Gels of Poly(Vinyl Alcohol) from Dimethyl Sulphoxide/Water Solutions. Polymer 33:3686–3690
Trieu H, Qutubuddin S PVA Hydrogels — II. Effect of Processing Parameters on Structure and Properties. (manuscript submitted to polymer)
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Trieu, H.H., Qutubuddin, S. Polyvinyl alcohol hydrogels I. Microscopic structure by freeze-etching and critical point drying techniques. Colloid Polym Sci 272, 301–309 (1994). https://doi.org/10.1007/BF00655501
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF00655501