Abstract
X-ray lithography using synchrotron radiation has been applied in a multi-step process for the production of plastic moulds to be used in the fabrication of separation nozzles by electrodeposition. For characteristic dimensions of a few microns a total height of the nozzle structure of about 400 μm has been achieved. Structural details of about 0.1 μm are being reproduced across the total thickness of the polymer layer. The surface finish of metallic separation nozzles produced by electrodeposition was equivalent to the high quality of the polymer surface. The separation-nozzle systems fabricated by the described method allow an increase by a factor three of the gas pressure in separationnozzle plants as compared to the present standard. This results in considerable savings in the enrichment of 235U for nuclear power production.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
Reference
Becker, E.W., Bier, W., Ehrfeld, W., Seidel, D., Schubert, K., Schütte, R.: Naturwissenschaften 63, 407 (1976); Becker, E.W., Bier, W., Bley, P., Ehrfeld, W., Schubert, K., Seidel, D.: Development and Technical Implementation of the Separation Nozzle Process for Enrichment of Uranium-235. KfK-Bericht 3310, Kernforschungszentrum Karlsruhe GmbH 1982
Becker, E.W., Nogueira Batista, P., Völcker, H.: Nucl. Technol. 52, 105 (1981)
Spiller, E., Feder, R., in: X-Ray Optics, Applications to Solids (H.J. Queisser, ed., Topics in Appl. Physics, Vol. 22). Berlin-Heidelberg-New York: Springer 1977
Moran, J.M., Maydan, D.: J. Vac. Sci. Technol. 16, 1620 (1979)
Author information
Authors and Affiliations
Additional information
The experiments with synchrotron radiation were performed at the DORIS electron storage ring of the “Deutsches Elektronensynchrotron”, Hamburg, and at the electron synchrotron of the “Physikalisches Institut der Univeristät Bonn”. The authors gratefully acknowledge the technical support of these institutions.
Rights and permissions
About this article
Cite this article
Backer, E.W., Ehrfeld, W., Münchmeyer, D. et al. Production of separation-nozzle systems for uranium enrichment by a combination of X-ray lithography and galvanoplastics. Naturwissenschaften 69, 520–523 (1982). https://doi.org/10.1007/BF00463495
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00463495