Abstract
An on-line, electronic feedback approach for automatic alignment of a laser resonator is described. A measure of the resonator alignment error is derived by partitioning a 1% sample of the laser output into quadrants, and using standard electronic circuits to compare the average power present in each quadrant. A motorized X — Y alignment system is then used to implement the alignment changes required to maintain optimum output quality from the laser. The system is shown capable of stabilizing the output power in each quadrant of the beam to within about 2% of the optimum level.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
J.E. Harry (ed.): Industrial Lasers and Applications (McGraw-Hill, London 1974)
W.C. Ball, C.M. Banas: Proc. Engineering and manufacturing meeting, San Diego, CA. (Oct. 1974) pp. 56–59
J. Ready (ed.): Lasers in Modern Industry (Society of Manufacturing Engineers, Dearborn, Mich. 1979) pp. 10–11
D. Belforte: In High Power Lasers and Applications, SPIE 270, 66–72 (1981)
J.S. Eckersley: Proc. SME Conf. Laser Welding and Surface Treatment, Plymouth, MI. (Oct. 1985)
M. Ohmine, S. Hoshinouchi, T. Iwasa et al.: Proc. ICALEO, Boston 44, 253–260 (Nov. 1984)
D.B. Snow, E.M. Brienan, B.H. Kear: Proc. 4th Int'l. Symp. Superalloys, Seven Springs, PA (1980)
V.E. Merchant: Proc. SPOT. Conf., Los Angeles, CA (March 1987) pp. 87–91
N. Tabata, N. Nagai, H. Yosida et al.: Proc. ICALEO, Boston 44, pp. 238–245 (Nov. 1984)
J.W. Davis: Industrial Application of Lasers, Eindhoven, The Netherlands (1984)
V.E. Merchant, M.R. Cervenan, H.J.J. Seguin: Proc. Int. Conf. on Lasers, Los Angeles, CA (March 1985) pp. 642–646
V.E. Merchant, H.J.J. Seguin, J. Dow: Rev. Sci. Instrum. 49, 1631 (1978)
A.K. Nath, H.J.J. Seguin, V.A. Seguin: IEEE J. QE-22, 268–274 (1986)
S.K. Nikumb, H.J.J. Seguin, V.A. Seguin, H. Reshef: J. Phys. E 20, 911 (1987)
Zhaogu Cheng, H.J.J. Seguin, S.K. Nikumb, V.A. Seguin, H. Reshef: Appl. Opt. 27, 836842 (1988)
Operating manuals, ORIEL model 18009 motormicrometer controller, model 18212 thru 18279 motormicrometers, Oriel Corporation, 250 Long Beach Blvd. Stratford, Conn. 06497-0872
Thermistors (Fenwal GB41J1) supplied by Electrosonic Inc., 1100 Gordon Baker Rd., Willowdale, Ontario, Canada, M2H-3B3
W.G. Jung: IC op-amp cookbook (H.W. Sams & Co., Indianapolis, Indiana 1978)