Abstract
A geometric model of grinding is developed. For the first time, this model takes account of wear of the abrasive grain. That permits prediction of the surface roughness at any time of tool operation. The wear is taken into account in terms of the physicochemical and mechanical interaction of the abrasive and the workpiece. This is of great importance for multiproduct manufacturing.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Kozlov, A.M. and Efremov, V.V., Development of microrelief during abrasive tool treatment, Izv. Vyssh. Uchebn. Zaved., Mashinostr., 2004, no. 1, pp. 59–64.
Zhou, X. and Xi, F., Modeling and predicting surface roughness of the grinding process, Int. J. Mach. Tools Manuf., 2002, vol. 42, pp. 969–977.
Salisbury, E.J., Domala, K.V., Moon, K.S., Miller, M.H., et al., A three-dimensional model for the surface texture in surface grinding, part 1: surface generation model, J. Manuf. Sci. Eng., 2001, vol. 123, no. 4, pp. 576–581.
Jianga, J.L., Gea, P.Q., Bia, W.B., Zhanga, L., et al., 2D/3D ground surface topography modeling considering dressing and wear effects in grinding process, Int. J. Mach. Tools Manuf., 2013, vol. 74, pp. 29–40.
Darafon, A., Warkentin, A., and Bauer, R., 3D metal removal simulation to determine uncut chip thickness, contact length, and surface finish in grinding, Int. J. Adv. Manuf. Technol., 2013, vol. 66, no. 9, pp. 1715–1724.
D’yakonov, A.A. and Shipulin, L.V., Selecting the cutting conditions for plane grinding by the wheel periphery, Naukoemkie Tekhnol. Mashinostr., 2013, no. 6 (24), pp. 14–18.
Ardashev, D.V., Definition of abrasive grain wear upon grinding from the standpoint of the kinetic theory of strength, J. Frict. Wear, 2015, vol. 36, no. 3, pp. 266–272.
Ardashev, D.V., Physicochemical wear of abrasive grains during grinding processes, J. Frict. Wear, 2014, vol. 35, no. 4, pp. 284–289.
Ardashev, D.V., Mathematic model of the blunting area of an abrasive grain in grinding processes, with account of different wear mechanisms, Proc. Eng., 2015, vol. 129, pp. 500–504.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © D.V. Ardashev, L.V. Shipulin, 2016, published in STIN, 2016, No. 8, pp. 18–22.
About this article
Cite this article
Ardashev, D.V., Shipulin, L.V. Simulation of grinding with wear of the abrasive grains. Russ. Engin. Res. 37, 150–153 (2017). https://doi.org/10.3103/S1068798X17020034
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X17020034