Abstract
The architecture and design features of the numerical control system for an E7106MF4 machining center are considered. This system permits five-axis machining by three-dimensional planing. Organization of the automatic electrical automation subsystem is discussed. Practical aspects of the control system are presented.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Grigoriev, S.N., Trends and problems of modernization of engineering industry based on national machine production, Vestn. Mosk. Gos. Tekhnol. Univ., Stankin, 2010, no. 3, pp. 7–13.
Esterzon, M.A., Petukhov, I.Ya., and Sakharova, O.P., RF Patent 2282524, 2006.
Martinov, G.M. and Martinova, L.I.., Development of basic computer CNC platform for building specialized control systems, Vestn. Mosk. Gos. Tekhnol. Univ., Stankin, 2014, no. 1 (24), pp. 92–97.
Martinov, G.M., Kozak, N.V., Nezhmetdinov, R.A., et al., Decomposition and synthesis of modern CNC systems Avtom. Prom., 2013, no. 5, pp. 8–14.
Grigoriev, S.N. and Martinov, G.M., Scalable open cross-platform kernel of PCNC system for multi-axis machine tool, Proc. CIRP, 2012, no. 1, pp. 238–243.
Grigoriev, S.N. and Martinov, G.M., Research and development of a cross-platform CNC kernel for multiaxis machine tool, Proc. CIRP, 2014, vol. 14, pp. 517–522.
Martinov, G.M., Nezhmetdinov, R.A., and Emel’yanov, A.S., Principles of development of the cross-platform software-implemented controller of PLC CNC systems with high-tech industrial complexes, Vestn. Mosk. Gos. Tekhnol. Univ., Stankin, 2013, no. 1(24), pp. 42–51.
Martinov, G.M., Ljubimov, A.B., Grigoriev, A.S., and Martinova, L.I., Multifunction numerical control solution for hybrid mechanic and laser machine tool, Proc. CIRP, 2012, no. 1, pp. 277–281.
Martinov, G.M., Obuhov, A.I., Martinova, L.I., and Grigoriev, A.S., An approach to building specialized CNC systems for non-traditional processes, Proc. CIRP, 2014, vol. 14, pp. 511–516.
Martinova, L.I., Pushkov, R.L., Kozak, N.V., and Trofimov, E.S., Solution to the problems of axle synchronization and exact positioning in a numerical control system, Autom. Remote Control (Engl. Transl.), 2014, vol. 75, no. 1, pp. 129–138.
Martinov, G.M., Lyubimov, A.B., Bondarenko, A.I., et al. Approach to building a multiprotocol CNC system, Autom. Remote Control (Engl. Transl.), 2015, vol. 76, no. 1, pp. 172–178.
Martinov, G.I., Kozak, N.V., Nezhmetdinov, R.A., and Lyubimov, A.B., Construction specific of CNC system control panels in accordance with universal program hardware components, Avtom. Zovrem. Tekhnol., 2010, no. 7, pp. 34–40.
Martinov, G.M., Nezhmetdinov, R.A., and Nikishechkin, P.A., Specific construction of editor control user program for IEC 61131 program, Vestn. Mosk. Gos. Tekhnol. Univ., Stankin, 2014, no. 4 (31), pp. 127–132.
Martinov, G.M., Nezhmetdinov, R.A., and Nikishechkin, P.A., Development of visualization and debugging control of programs for electric automation, integrated in CNC, Vestn. Mosk. Gos. Tekhnol. Univ., Stankin, 2012, no. 4(23), pp. 134–138.
Martinova, L.I., Grigoryev, A.S., and Sokolov, S.V., Diagnostics and forecasting of cutting tool wear at CNC machines, Autom. Remote Control (Engl. Transl.), 2012, vol. 73, no. 4, pp. 742–749.
Martinova, L.I., Sokolov, S.S., and Nikishechkin, P.A., Tools for monitoring and parameter visualization in computer control systems of industrial robots, in Sixth Int. Conf. on Swarm Intelligence and the Second BRICS Congr. on Computational Intelligence (ICSI-CCI’2015), Tan, Y., et al., Eds., 2015, part 2, pp. 200–207.
Martinov, G.M., Grigoryev, A.S., and Nikishechkin, P.A., Real-time diagnosis and forecasting algorithms of the tool wear in the CNC systems, in Sixth Int. Conf. on Swarm Intelligence and the Second BRICS Congr. on Computational Intelligence (ICSI-CCI’2015), Tan, Y., et al., Eds., 2015, part 3, pp. 115–126.
Martinov, G.M. and Nezhmetdinov, R.A., Modular design of specialized numerical control systems for inclined machining centers, Russ. Eng. Res., 2015, vol. 35, no. 5, pp. 389–393.
Martinov, G.M. and Nezhmetdinov, R.A., Modular design of specialized numerical control systems for inclined machining centers, Russ. Eng. Res., 2015, vol. 35, no. 5, pp. 389–393.
Martinov, G.M. and Kozak, N.V., Numerical control of large precision machining centers by the AxiOMA control system, Russ. Eng. Res., 2015, vol. 35, no. 7, pp. 534–538.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © G.M. Martinov, N.V. Kozak, 2015, published in STIN, 2015, No. 8, pp. 2–6.
About this article
Cite this article
Martinov, G.M., Kozak, N.V. Specialized numerical control system for five-axis planing and milling center. Russ. Engin. Res. 36, 218–222 (2016). https://doi.org/10.3103/S1068798X16030126
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X16030126