Abstract
The hypothesis that high-frequency vibration of a dynamic disk system is excited by a rotating roller is verified. The information content of the vibrational signal is determined. The characteristics of the vibrational signal are compared with the rotation characteristics and the machining precision.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Kozochkin, M.P., Sabirov, F.S., Bogan, A.N., and Myslivtsev, K.V., Vibrational diagnostics of roller bearings in metal-cutting machines, Russ. Eng. Res., 2013, vol. 33, no. 8, pp. 486–489.
Zavgorodnii, V.I., Kozochkin, M.P., Maslov, A.R., and Sabirov, F.S., Influence of the dynamic characteristics of tool and the blank on the vibroacoustic monitoring of cutting, Russ. Eng. Res., 2010, vol. 30, no. 9, pp. 939–943.
Grigor’ev, S.N., Kozochkin, M.P., Sabirov, F.S., and Sinopal’nikov, V.A., Current problems in machinetool diagnostics, Vestn. MGTU Stankin, 2010, no. 4, pp. 27–36.
Kozochkin, M.P. and Sabirov, F.S., Attractors in cutting and their future use in diagnostics, Meas. Techn., 2009, vol. 52, no. 2, pp. 166–171.
Vainer, L.G. and Shakhnovskii, S.S., More precise grinding of the ends of a roller, Stanki Instrum., 1985, no. 5, pp. 31–32.
Maslov, A.R., Monitoring surface roughness by vibroacoustic diagnostics, Vestn. MGTU Stankin, 2012, no. 2, pp. 29–31.
Zaretskii, A.V., Gandel’sman, V.B., and Shakhnovskii, S.S., Bidirectional end grinding of cylindrical rollers for railroad bearings with forced rotation, Tekhnol. Obespech. Povysh. Kach. Podshipn.: Tr. Inst. VNIPP, 1976, no. 1(87), pp. 91–104.
Vainer, L.G. and Rivkin, A.V., Vibroacoustic diagnostics of bidirectional end grinding, Vestn. Ross. Univ. Druzhby Narodov, Ser. Inzh. Issled., 2011, no. 3, pp. 25–27.
Kuznetsov, A.P. and Kosov, M.G., Structural thermophysical analysis of metal-cutting machines, Russ. Eng. Res., 2011, vol. 31, no. 6, pp. 599–606.
Kozochkin, M.P., Gusev, A.V., and Porvatov, A.N., Creation of portable diagnostic units for monitoring machine tools, Vestn. MGTU Stankin, 2011, no. 1, pp. 42–47.
Tereshin, M.V., Tumanov, A.A., and Cherkasova, N.Yu., Development of a diagnostic system for cutting processes, Vestn. MGTU Stankin, 2012, no. 4(23), pp. 64–67.
Kosov, M.G. and Rivkin, A.V., Taking account of the contact rigidity of conical joints in the simulation of machine-tool precision, Informatsionnye tekhnologii v tekhnicheskikh i sotsial’noekonomicheskikh sistemakh (Information Technology in Engineering and Society), Solomentsev, Yu.M., Ed., Moscow: ITs MGTU Stankin, Yanus-K, 2006, issue 4, vol. 1.
Kosov, M.G. and Rivkin, A.V., Taking account of friction in calculating the contact rigidity of a conical tailstock, Inzhenernye sistemy 2008: Tezisy dokladov vseros. nauch.-prakt. konf. (Engineering Systems 2008: Abstracts of the Proceedings of a Russian Conference), Moscow: RUDN, 2008.
Gilovoi, L.Y. and Molodtsov, V.V., Influence of centrifugal forces on the operation of HSK couplings, Russ. Eng. Res., 2012, vol. 32, no. 3, pp. 276–281.
Gilovoi, L.Y., Krutov, A.V., and Molodtsov, V.V., Influence of modular roller guides on the rigidity of metalworking machines, Russ. Eng. Res., 2013, vol. 33, no. 8, pp. 471–476.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © F.S. Sabirov, L.G. Vainer, A.V. Rivkin, 2014, published in STIN, 2014, No. 12, pp. 18–21.
About this article
Cite this article
Sabirov, F.S., Vainer, L.G. & Rivkin, A.V. Vibroacoustic diagnostics of bidirectional end milling. Russ. Engin. Res. 35, 458–461 (2015). https://doi.org/10.3103/S1068798X15060179
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X15060179