Abstract
Expanded application of vibroacoustic diagnostic systems in metal cutting and friction is considered. A model is proposed for the behavior of vibroacoustic signals in friction. Its diagnostic application in grinding is described.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Sviridenok, A.I., Myshkin, N.K., Kalmykova, T.F., and Kholodilov, O.V., Akusticheskie i elektricheskie metody v tribotekhnike (Acoustic and Electrical Methods in Tribological Research), Minsk: Nauka i Tekhnika, 1987.
Kozochkin, M.P., Kochinev, N.A., and Sabirov, F.S., Diagnostics and monitoring of complex production processes using measurement of vibration-acoustic signals, Meas. Techn., 2006, vol. 49, no. 7, pp. 672–678.
Kolubaev, E.A., Kolubaev, A.V., and Sizova, O.V., Analysis of acoustic emission in the slipping friction of high-manganese steel, Pis’ma ZhTF, 2010, vol. 36, no. 16, pp. 55–61.
Kozochkin, M.P., Maslov, A.R., and Porvatov, A.N., Control of cutting by integration of the diagnostic subsystem in the numerical control system of a metal-cutting machine, Vestn. MGTU Stankin, 2011, no. 3, pp. 110–111.
Malenko, P.I., Acoustic emission of frictional surfaces with lubrication, Kond. Sredy Mezhfaznye Gran., 2011, vol. 13, no. 2, pp. 164–171.
Kragel’skii, I.V., Dobychin, M.N., and Kombalov, V.S., Osnovy raschetov na trenie i iznos (Fundamentals of Friction and Wear Calculations), Moscow: Mashinostroenie, 1977.
Sviridenok, A.I., Kalmykova, T.F., and Kholodilov, O.V., Investigation of actual polymer-metal frictional contact area by means of acoustic vibrations, Tren. Iznos, 1982, vol. 3, part 2, no. 5, pp. 808–812.
Kozochkin, M.P., Sabirov, F.S., Bogan, A.N., and Myslivtsev, K.V., Vibrational diagnostics of roller bearings in metal-cutting machines, Russ. Eng. Res., 2013, vol. 33, no. 8, pp. 486–489.
Kozochkin, M.P. and Smirnov, V.V., Experimental studies in acoustic emission in friction of solids, Tren. Iznos, 1983, vol. 4, no. 6, pp. 991–994.
Kozochkin, M.P., Nonlinear cutting dynamics, Russ. Eng. Res., 2012, vol. 32, no. 4, pp. 387–391.
Kozochkin, M.P., Sabirov, F.S., Porvatov, A.N., and Bogan, A.N., Vibrational monitoring of production equipment, Vestn. MGTU Stankin, 2002, no. 4(23), pp. 8–14.
Grigoriev, S.N., Kozochkin, M.P., Sabirov, F.S., and Kutin, A.A., Diagnostic systems as basis for technological improvement, Procedia CIRP: Fifth CIRP Conference on High Performance Cutting, 2012, vol. 1, pp. 599–604.
Astashev, V.K., Andrianov, N.A., Kozochkin, M.P., et al., On the implementation of ultrasonic technology, J. Machin. Manuf. Rel., 2009, vol. 38, no. 6, pp. 566–571.
Kozochkin, M.P., Vibration in cutting processes, Russ. Eng. Res., 2009, vol. 29, no. 4, pp. 428–432.
Kochinev, N.A. and Sabirov, F.S., Measurement of the dynamic characteristics of machine tools by a pulse loading method, Meas. Techn., 2009, vol. 52, no. 6, pp. 621–625.
Yurkevich, V.V., Measurement of cutting tool vibrations during turning, Meas. Techn., 2006, vol. 49, no. 7, pp. 660–663.
Zavgorodnii, V.I., Kozochkin, M.P., Maslov, A.R., and Sabirov, F.S., Influence of the dynamic characteristics of the tool and the blank on the vibroacoustic monitoring of cutting, Russ. Eng. Res., 2010, vol. 30, no. 9, pp. 939–943.
Ovsyannikov, A.Sh., Prochnost’ poverkhnogo sloya obrabotannoi poverkhnosti (Strength of the Machined Surface Layer), Alma-Ata: Nauka, 1975.
Shuster, L.Sh., Adgezionnoe vzaimodeistvie rezhushchego instrumenta s obrabatyvaemym materialom (Adhesive Interaction of the Cutting Tool and Blank), Moscow: Mashinostroenie, 1988.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © M.P. Kozochkin, 2014, published in STIN, 2014, No. 12, pp. 12–17.
About this article
Cite this article
Kozochkin, M.P. Acoustic properties of contact in dry friction. Russ. Engin. Res. 35, 452–457 (2015). https://doi.org/10.3103/S1068798X15060088
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X15060088