Abstract
The determination of the cutting-edge parameters in sharpening a shaping tool is considered, for purposes of automatic design.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Charnko, D.V. and Timchenko, A.I., Shaped shaft-bush couplings in manufacturing, Vestn. Mashinostr., 1981, no. 1, pp. 33–37.
Borovich, L.S., Besshponochnoe soedinenie detalei mashin (Tongueless Machine-Part Coupling), Moscow: Mashgiz, 1951.
Russian patent application 2011142677.
Razumov, M.S. and Ponkratov, P.A., Automated design of tool profiles for burnishing, Sb. statei III mezhdunar. nauch.-tekhn. konf. Sovremennye avtomobil’nye materialy i tekhnologii (Proceedings of the Third International Conference on Current Auto-Industry Materials and Technologies), Kursk: YuZGU, 2011, pp. 113–117.
Barbot’ko, A.I., Ponkratov, P.A., and Razumov, M.S., Manufacture of shaping tools for the machining of complex couplings, Materialy 2-i mechdunar. nauch.-prakt. konf. Tekhnika i tekhnologii: Puti innovatsionnogo razvitiya (Proceedings of the Second International Conference on Engineering and Technology: Paths to Innovative Development), Kursk: YuZGU, 2012, pp. 36–39.
Barbot’ko, A.I., Ponkratov, P.A., Razumov, M.S., et al., Analysis of the shape error of a contoured shaft in machining by a complex shaping tool, Izv. YuZGU, Ser. Tekhn. Tekhnol., 2012, no. 2, part 1, pp. 54–57.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © A.I. Barbot’ko, M.S. Razumov, A.I. Pykhtin, P.A. Ponkratov, 2015, published in Vestnik Mashinostroeniya, 2015, No. 2, pp. 67–69.
About this article
Cite this article
Barbot’ko, A.I., Razumov, M.S., Pykhtin, A.I. et al. Selecting the cutting edge of a shaping tool. Russ. Engin. Res. 35, 344–346 (2015). https://doi.org/10.3103/S1068798X15050068
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X15050068