Abstract
In tests of worm gears, their reliability and load capacity may be assessed in terms of the braking torques corresponding to maximum efficiency. Different lubricants are used in the tests.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
GOST (State Standard) R 50891-96: General-Purpose Gears for Industrial Machinery: General Requirements, 1996.
Veselovskii, L.L., Manufacture of worm gears from surface-hardened gray iron, Tyazh. Mashinostr., 2011, no. 6, pp. 32–35.
Kiselev, B.R., Zamyatina, N.I., and Godlevskii, V.A., Jamming of worm gears when using frictionally active additives, Tren. Smazka Mash. Mekhan., 2013, no. 10, pp. 15–19.
Polyakov, S.A., Samoorganizatsiya pri treniya i effekt bezyznostnosti (Self-Organization in Friction and Wear-Free Operation), Moscow: RGAU-MSKhA, 2009.
Polyakov, S.A., Kuksenova, L.I., Lychagin, V.V., and Goncharov, S.Yu., Methodological selection principles for structural materials and lubricants operating with slipping friction, Tren. Smazka Mash. Mekhan., 2013, no. 8, pp. 29–36.
Metodicheskie ukazaniya k laboratornym rabotam po kursu Osnovy proektirovaniya mashin (Methodological Notes for Laboratory Work on the Fundamentals of Mechanical Design), Lelikov, O.P., Ed., Moscow: MGTU im. Baumana, 1997, vol. 2.
Vyaznikov, V.A., Predicting the Condition of Worm Gears from the Nonuniform Rotation of the Low-Speed Shaft, Extended Abstract of Cand. Sci. Dissertation, Moscow: Bauman Moscow State Technological University, 2014.
Fomin, M.V., Worm gears, Spravochn., Inzh. Zh., 2011, no. 4, pp. 1–24.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © S.A. Polyakov, S.Yu. Goncharov, M.N. Zakharov, V.V. Lychagin, 2015, published in Vestnik Mashinostroeniya, 2015, No. 1, pp. 54–57.
About this article
Cite this article
Polyakov, S.A., Goncharov, S.Y., Zakharov, M.N. et al. Improving worm-gear performance by optimal lubricant selection in accelerated tests. Russ. Engin. Res. 35, 253–255 (2015). https://doi.org/10.3103/S1068798X15040206
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X15040206