Abstract
New complex alloying has been designed for aluminum antifriction alloys. Their tribological behavior has been determined, including the running-in ability, scoring resistance, and wear resistance. The interconnection of the tribological properties of experimental alloys with a doping level by different elements has been analyzed. Recommendations on the optimum content of alloying elements for the antifrictionality of the aluminum based alloys have been given.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Bushe, N.A., Podshipniki iz alyuminievykh splavov (Bearings Made of Aluminium Alloys), Moscow: Transport, 1974.
Karacharova, E.G. and Mironov, A.E, Antifriction aluminum alloys with enhanced properties, Liteinoe Proizvod., 2011, no. 10, pp. 11–13.
Kotova, E.G., Kurbatkin, I.I., Mironov, A.E., and Gershman, I.S, Research of microstructure and mechanical properties of experimental antifriction alloys (for monometallic sleeve bearings), Tsvetn. Met., 2013, no. 5, pp. 66–73.
Mironov, A.E., Gershman, I.S., Ovechkin, A.V., and Gershman, E.I, Comparison of scoring resistance of new antifriction aluminum alloys and tradition Al antifriction bronze, J. Frict. Wear, 2015, vol. 36, no. 3, pp. 257–261.
Mironov, A.E., Gershman, I.S., Ovechkin, A.V., and Gershman, E.I, The interrelation of the run-in ability of bronzes and aluminum-based antifriction alloys with their mechanical properties and degree of alloying, J. Frict. Wear, 2016, vol. 37, no. 1, pp. 23–26.
Abd El-Salam, F., Abd El-Khalek, A.M., Nada, R.H., Wahab, L.A., and Zahran, N.Y, Effect of Sn content on structural and mechanical properties of Al–Si alloy, Mater Sci. Eng., A, 2010, vol. 527, pp. 1223–1229.
Gorny, M. and Sikora, G, Effect of titanium addition and cooling on primary a(Al) grains and tensile properties of Al–Cu alloy, J. Mater. Eng. Perform., 2015, vol. 24, no. 3, pp. 1150–1156.
Feyzullahoglu, E. and Sakiroglu, N, The wear of aluminium-based journal bearing materials under lubrication, Mater. Des., 2010, vol. 31, pp. 2532–2539.
Prasada Rao, A.K, Nucleation in Al alloys processed by MCDC casting, J. Mater. Eng. Perform., 2015, vol. 24, no. 6, pp. 2219–2224.
Lu, Z.C., Gao, Y., Zeng, M.Q., and Zhu, M, Improving wear performance of dual-scale Al–Sn alloys. The role of Mg addition in enhancing Sn distribution and tribolayer stability, Wear, 2014, vol. 309, pp. 216–225.
Kaban, I., Kohler, M., Latke, L., Hoyer, W., Mattern, N., Eckert, I., and Greer, A.L, Interfacial tension, wetting, and nucleation in Al–Bi and Al–Pb monotectic alloys, Acta Mater., 2011, vol. 59, pp. 6880–6889.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © A.E. Mironov, I.S. Gershman, E.I. Gershman, M.M. Zheleznov, 2017, published in Trenie i Iznos, 2017, Vol. 38, No. 2, pp. 67–72.
About this article
Cite this article
Mironov, A.E., Gershman, I.S., Gershman, E.I. et al. Relationship between the tribological properties of experimental aluminum alloys and their chemical composition. J. Frict. Wear 38, 87–91 (2017). https://doi.org/10.3103/S1068366617020155
Received:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068366617020155