Abstract
A methodology has been elaborated for controlling the structure formation in cutting-tool hard alloys during the plasma modification of their surfaces in order to produce an ultradispersed structure in the surface layer providing a high level of performance characteristics. The paper presents a block diagram of synthesis of modified layers with an ultradispersed structure, which includes a combination of theoretical, experimental, and technological investigations. The tool life testing of the modified tools has been carried out.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Lavrinenko, V.I., Sytnyk, B.V., Skryabin, V.O., et al., The influence of plasma treatment on the change of elemental composition, roughness and wear resistance of a cemented carbide tool working surface, J. Superhard Mater., 2010, vol. 32, no. 4, pp. 270–273.
Samotugin, S.S. and Leshchinskii, L.K., Plasmennoe uprochnenie instrumental’nykh materialov (Plasma Hardening of Tool Materials), Donetsk: Novyi Mir, 2002.
Samotugin, S.S., Nesterov, O.Yu., Mazur, V.A., Cherevko, D.A., Sheremeta, O.M, Surface hardening of tool steels and alloys through heating with a highly concentrated plasma jet, Uprochn. Tekhn. Pokryt., 2005, no. 3, pp. 23–28.
Samotugin, S.S., Lavrinenko, V.I., Kudinova, E.V., and Samotugina, Yu.S., The influence of plasma surface modification process on the structure and phase composition of cutting-tool hardmetals, J. Superhard Mater., 2011, vol. 33, no. 3, pp. 200–207.
Samotugin, S.S., Lavrinenko, V.I., Kudinova, E.V., and Samotugina, Yu.S., The study of fracture toughness and failure mechanisms of cutting-tool hardmetals with plasma-modified surface, J. Superhard Mater., 2013, vol. 35, no. 4, pp. 242–250.
Borisov, Yu.S. and Muzhichenko, A.F, Computer modeling of the plasma spraying process, Avtomat. Svarka, 2000, no. 12, pp. 42–51.
Kharlamov, M.Yu., The use of multiprocessor computer systems for numerical modeling of arc plasma stream, Elektron. Modelirov., 2009, vol. 31, no. 5, pp. 83–94.
Golovko, L.F. and Lukyanenko, S.O. (Eds.), Lazerni tekhnologii ta komp’yuterne modelyuvannya (Laser Technologies and Computer Modeling), Kyiv: Vistka, 2009.
Kundas, S.P., Markovnik, D.V., Ivanov, D.G., Krashanin, V.A., Il’inykh, S.A., A mathematical model of the process of plasma surface hardening of steel workpieces, Uprochn. Tekhn. Pokryt., 2008, no. 3, pp. 41–46.
Sosin, N.A., Ermakov, S.A., and Topolyanskii, P.A., Plasmennye tekhnologii (Plasma Technologies), St.Petersburg: Izd. Politekhn. Univer., 2008.
Samotugin, S.S., Mazur, V.A., and Kudinova, E.V, Mathematical modeling of the process of plasma surface modification of hard-alloy tools, in Visnyk SevNTU. Seriya Mashynopryladobuduvannya ta transport. Zb. nauk. pr. (Bulletin of Sevastopol National Technical University. Series: Machine Building and Instrument Engineering. Collected Research Papers), Sevastopol, 2013, issue 140, pp. 123–130.
Petrova, L.G. and Chudina, O.V, Prediction of hardening of metals and alloys by using the methodology of controlling the structure formation, Uprochn. Tekhn. Pokryt., 2007, no. 7, pp. 3–11.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © S.S. Samotugin, V.I. Lavrinenko, E.V. Kudinova, Yu.S. Samotugina, V.I. Ivanov, 2017, published in Sverkhtverdye Materialy, 2017, Vol. 39, No. 3, pp. 78–84.
About this article
Cite this article
Samotugin, S.S., Lavrinenko, V.I., Kudinova, E.V. et al. The fundamentals of synthesis of modified layers on cutting-tool hard alloys. J. Superhard Mater. 39, 210–215 (2017). https://doi.org/10.3103/S1063457617030091
Received:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1063457617030091