Abstract
The influence of alloying and microalloying elements on the mechanical properties of pipe-steel sheet (strength category K60) depends on the temperature in low-temperature controlled rolling, on account of the polymorphous γ → α and eutectoid transformation of austenite in the mill’s finishing stand.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Bernshtein, M.L., Struktura deformirovannogo metalla (Structure of Deformed Metal), Moscow: Metallurgiya, 1977.
Gorbatenko, V.P., Kosarevich, N.I., Dorokhin, V.M., et al., Influence of controlled rolling parameters of thick sheets on the impact strength of 10G2FB steel, Metall. Gornorudn. Prom-st., 2004, no. 5, pp. 64–66.
Gorbatenko, V.P., Kosarevich, N.I., Konarev, V.G., and Gorbatenko, V.V., The specific influence of vanadium and niobium on the mechanical properties of high-strength pipe steel at low-temperature controlled rolling, Stroit., Materialoved., Mashinostr., 2006, no. 36, pp. 126–130.
Matrosov, Yu.I., Litvinenko, D.A., and Golovanenko, S.A., Stal’ dlya magistral’nykh gazoprovodov (Steel for Main Gas Pipelines), Moscow: Metallurgiya, 1989.
Morozov, Yu.D., Naumenko, A.A., and Lisotskii, I.V., Effect of rolling heating and deformation and accelerated cooling regimes on mechanical property formation for rolled steel sheet of strength class Kh80, Metallurgist, 2011, vol. 54, nos. 9–10, pp. 686–695.
Morozov, Yu.D. and Naumenko, A.A., Study of the effect of chemical compound composition on a set of mechanical properties and microstructure of sheet rolled product of strength class K65 (X80), Metallurgist, 2009, vol. 53, nos. 11–12, pp. 685–692.
Morozov, Yu.D., Matrosov, Yu.I., Bolotov, A.S., et al., Development and production of pipe steels in the 21st century, Stal’, 2001, no. 4, pp. 58–62.
Efron, L.I., The structure and mechanical properties of steels at thermomechanical processing in the flow of the rolling mill, Stal’, 1995, no. 8, pp. 57–64.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © V.P. Gorbatenko, S.V. Petrushchak, 2018, published in Stal’, 2018, No. 2, pp. 37–42.
About this article
Cite this article
Gorbatenko, V.P., Petrushchak, S.V. Influence of the Final Rolling Temperatures on the Relation between the Composition and the Mechanical Properties of K60 Pipe Steel. Steel Transl. 48, 120–125 (2018). https://doi.org/10.3103/S0967091218020043
Received:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S0967091218020043