Abstract
A mathematical model is proposed for determining the forces and torques in the preliminary cold straightening of thick steel sheet in a seven-roller machine. On that basis, the bearing reaction of the working rollers, the residual stress in the wall of the steel sheet, the proportion of plastic strain over the sheet thickness, and the relative strain of longitudinal surface fibers of the sheet in straightening may be determined as a function of the working-roller radius, the spacing between rollers of the straightening machine, the reduction of the sheet by the upper rollers, and the sheet thickness, as well as the Young’s modulus, yield point, and strengthening modulus of the sheet. The results may be used at manufacturing and metallurgical plants.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Mazur, I.P., Dolmatov, A.P., and Borisov, S.S., Investigation and numerical modeling of the process of cold rolling HSLA steels, Mater. Sci. Forum, 2012, vols. 704–705, pp. 832–841.
Astakhov, A.A., Dunaev, D.N., and Mazur, I.P., Machining profiling of the working rolls as a way to control cross-section of the rolled steel, Mater. Sci. Forum, 2013, vol. 762, pp. 337–342.
Mazur, I.P., Monitoring the surface quality in sheet rolling, Steel Transl., 2011, vol. 41, no. 4, pp. 326–331.
Mazur, I. and Koinov, T., Quality control system for a hot-rolled metal surface, J. Chem. Technol. Metall., 2014, vol. 49, no. 1, pp. 71–76.
Belskiy, S.M., Yankova, S., Chuprov, V.B., Bakhaev, K.V., and Stoyakin, A.O., Temperature field of stripes under hot rolling, J. Chem. Technol. Metall., 2015, vol. 50, no. 6, pp. 613–616.
Belskiy, S., Mazur, I., Lezhnev, S., and Panin, E., Distribution of linear pressure of thin-sheet rolling across strip width, J. Chem. Technol. Metall., 2016, vol. 51, no. 4, pp. 371–378.
Mukhin, Yu.A., Solov’ev, V.N., and Bobkov, E.B., Formation of the structure of metal in the finishing group of stands of the hot-rolling mill, Steel Transl., 2001, vol. 31, no. 3, pp. 77–80.
Mukhin, Yu.A., Belyanskij, A.D., Zajtsev, V.S., Tret’yakov, A.I., and Baryshev, V.G., Production of hot rolled strip with guaranteed mechanical properties, Stal’, 1992, no. 12, pp. 61–63.
Mukhin, Yu.A., Belyanskij, A.D., Kolpakov, S.S., Nikitin, V.E., and Mel’nikov, A.V., Improvement of hot strip rolling conditions to reduce rolled-in scale, Stal’, 1993, no. 7, pp. 41–43.
Shinkin, V.N. and Kolikov, A.P., Simulation of the shaping of blanks for large-diameter pipe, Steel Transl., 2011, vol. 41, no. 1, pp. 61–66.
Shinkin, V.N. and Kolikov, A.P., Elastoplastic shaping of metal in an edge-bending press in the manufacture of large-diameter pipe, Steel Transl., 2011, vol. 41, no. 6, pp. 528–531.
Shinkin, V.N. and Kolikov, A.P., Engineering calculations for processes involved in the production of largediameter pipes by the SMS Meer technology, Metallurgist, 2012, vol. 55, no. 11-12, pp. 833–840.
Zdor, V.A. and Brovman, M.Ya., Casting-rolling unit with cambered rolls, Russ. Metall. (Engl. Transl.), 2012, vol. 2012, no. 9, pp. 757–762.
Brovman, M.Ya., Stress state of cylindrical pipe with variable mechanical properties, Russ. Eng. Res., 2011, vol. 31, no. 8, pp. 737–741.
Brovman, M.Ya., Bending deformation of rotating metallic tubes, Russ. Metall. (Engl. Transl.), 2010, vol. 2010, no. 9, pp. 779–789.
Brovman, M.Ya., Design of welded double layer pipelines, Weld. Int., 2012, vol. 26, no. 7, pp. 553–554.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © V.N. Shinkin, 2016, published in Izvestiya Vysshikh Uchebnykh Zavedenii, Chernaya Metallurgiya, 2016, No. 12, pp. 870–874.
About this article
Cite this article
Shinkin, V.N. Preliminary straightening of thick steel sheet in a seven-roller machine. Steel Transl. 46, 836–840 (2016). https://doi.org/10.3103/S0967091216120093
Received:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S0967091216120093