Abstract
In this paper, a fuzzy algorithm was used for determining the coefficients of a PID controller using an online method. The plant used in this system is a welder robot, which is used for welding oil and gas pipelines. This robot rest on the pipe and weld it by moving around. The speed is adjusted using a motor moving the robot around the pipe. A digital controller also used for implementation. In this research, in order to choose the rules the skills transmit method and that how the PID response is required has been used. In this paper, the type of algorithms that continuously assigns PID coefficients using an online method depending on the characteristics of the system which is based on fuzzy logic was used. First, the rules associated to each output in relation to inputs are depicted in it. Using the mentioned method, simulation results and then implementation results were obtained and discussed.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
Malwiya, R. and Rai, V., Optimum tuning of PI controller parameter for speed control of induction motor, Int. J. Adv. Technol. Eng. Res., 2015, vol. 5, pp. 21–24.
Nayak, A. and Singh, M., Study of tuning of PID controller by using particle swarm optimization, Int. J. Adv. Eng. Res. Stud., 2015, pp. 346–350.
Vikhe, P.S., Punjabi, N., and Kadu, C.B., DC motor speed control using PID controller in lab view, Int. J. Innovative Sci. Mod. Eng., 2015, vol. 3, pp. 38–41.
Ali, H. and Wadhwani, S., Intelligent PID controller tuning for higher order process system, Int. J. u- e- Serv. Sci. Technol., 2015, vol. 8, pp. 323–330.
Rezaee, A. and Golpayegani, M.K., Intelligent control of cooling-heating systems by using emotional learning, Electron. Electr. Eng., 2012, vol. 18, no. 4, pp. 26–30.
Jose, A., Augustine, C., Malola, S.M., and Chacko, K., Performance study of PID controller and LQR technique for inverted pendulum, World J. Eng. Technol., 2015, vol. 3, pp. 76–81.
Rezaee, A. and Shekealgourabi, F.J., Improving the performance of PID controllers by using evolutionary algorithm, Asian J. Math. Comput. Res., 2016, vol. 8, no. 2, pp. 82–91.
Sariyildiz, E., Yu, H., and Ohnishi, K., A practical tuning method for the robust PID controller with velocity feed-back, Machines, 2015, vol. 3, pp. 208–222.
Zhao, Ya. and Collins, E.G., Jr., Fuzzy PI control design for an industrial weigh belt feeder, IEEE Trans. Fuzzy Syst., 2003, vol. 11, no. 3.
Lin, S.Y., Chen, S.B., and Li, C.T., Welding Robot and Its Application, Bejing: Beijing Industry Press, 2000.
Kong, M., Research on process control method for arc welding robot based on multi information sensing realtime, PhD Thesis, Shanghai Jiao Tong University, 2009.
Carvajal, J., Chen, G., and Ogmen, H., Fuzzy PID controller: Design performance evaluation, and stability analysis, Inf. Sci., 2000, vol. 123, no. 3, pp. 249–270.
Chen, B. and Chen, S., Multi-sensor information fusion in pulsed GTAW based on fuzzy measure and fuzzy integral, Assem. Autom., 2010, vol. 30, no. 3, pp. 276–285.
Warwick, K. and Kang, Y.H., Self-tuning proportional, integral and derivative controller based on genetic algorithm least squares, J. Syst. Control Eng., 1998, vol. 212, no. 16, pp. 437–448.
Author information
Authors and Affiliations
Corresponding author
Additional information
The article is published in the original.
About this article
Cite this article
Rezaee, A. Determining PID controller coefficients for the moving motor of a welder robot using fuzzy logic. Aut. Control Comp. Sci. 51, 124–132 (2017). https://doi.org/10.3103/S0146411617020067
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S0146411617020067