Abstract
The solid–water interface is ubiquitous in natural and synthetic systems as the primary site for chemical reactions under near-ambient conditions. Examples include the interactions of contaminants with mineral–water interfaces in natural environments, electrochemical reactions at the electrode-electrolyte interface relevant to energy storage (e.g., ion adsorption/electrical double layer formation, ion insertion), and oxidation of structural materials (e.g., rust). Yet many of these phenomena remain largely mysterious at a mechanistic level. The x-ray reflectivity technique, using highly penetrating hard x-rays, directly probes the solid–water interfaces through in situ studies. This approach has provided new insights into the molecular-scale structures and processes that occur at these “wet” interfaces. In this article, we review recent advances in the understanding of these systems, focusing specifically on the organization of interfacial “hydration layers” and the important role of adsorbed ions at charged solid–liquid interfaces.
Similar content being viewed by others
Avoid common mistakes on your manuscript.
Water, solid–water interfaces, and “interfacial water”
Water, the most abundant substance on Earth, has unusual properties. As a solid, water ice most commonly takes a hexagonal structure with a lateral lattice spacing of 4.52 Å, an interlayer spacing of 3.64 Å, and an oxygen–oxygen distance of 2.75 Å.1 Under ambient conditions, water retains a disordered tetrahedral network (Figure 1) that is stabilized by hydrogen bonds (with an energy of ~21 kJ/mol, 0.22 eV, or ~9 kBT per bond).2,3 This interaction is largely responsible for the properties of liquid water, including the average O–O distance of 2.8 Å and its relatively high liquid density (1 g/cm 3 at 4°C, with a corresponding number density of ρw = 1 H2O/30.3 Å3). The distance over which water retains a memory of perturbations (i.e., its correlation length) is ~4 Å.4 Water also is a “universal solvent” and is a necessary ingredient for all living things. Because water is a polar molecule, it solvates charged species through its strong dipolar interaction, and the hydration energies of ions can be estimated based on the ion’s charge and effective size. This tendency of water to form “solvation shells” around ions is a key control over the nature and rates of chemical reactions in aqueous solutions.5
A primary characteristic of any solid surface is that atoms at the surface are generally undercoordinated with respect to those in the bulk.6 The greater availability of atoms at the interface for reaction (i.e., without the need for solid-state diffusion of reactants) makes interfaces more chemically reactive than solid materials. Most interfaces that are stable in ambient environments are in the form of oxides, minerals, organics, or other materials having a relatively low surface energy. They consist of functional groups whose properties are controlled by the interaction of the undercoordinated surface lattice atoms with water and dissolved species. A common example is the acid-base chemistry found at oxide surfaces, leading to a pH-dependent surface charge as a result of its equilibration with water leading to a mixture of -OH2+, −OH, and −O− surface functional groups versus pH.7
From these simple considerations, one can anticipate many of the properties of water in the vicinity of an interface (i.e., “interfacial water,” Figure 1) that are analogous to the hydration layers formed around dissolved ions. The structure of interfacial water is typically distinct from bulk water. The interaction of water with the surface functional groups (e.g., through hydrogen bonds to oxide surfaces) stabilizes the interfacial hydration structure (e.g., with a specific orientation of the water dipole moment) with respect to the hydrogen-bonding structure that occurs in bulk water. This interfacial hydration structure is also controlled by a balance between the lateral arrangement of the surface functional groups exposed at the solid surface with the natural lateral spacing of a dense water layer (i.e., its “epitaxy”). This can be characterized by comparing the size of the solid surface unit cell with the natural two-dimensional (2D) packing density of water, ρ2D, estimated through the dimensional relation ρ2D = ρw2/3 ≈ 1 H2O/10 Å2. Finally, the vertical organization of any hydration layer can be expected to be limited in extent to a few water correlation lengths,4 corresponding to distances of ~1–2 nm from the surface.
Observing the solid–water interface structure with x-rays
Relatively few methods are available by which solid–water interfaces can be understood through direct observation. This is because most “surface science” probes use electrons or ions that are unable to penetrate through the liquid phase. Of the possible surface- and interface-sensitive tools, only scanning probe microscopies 8 and photon- or neutron-based probes 9–14 can interrogate the solid–liquid interfaces directly through in situ observations. Of these, x-ray based tools have the capability to probe the interfacial hydration structure with Ångström-scale resolution.
Scattering of x-rays from well-defined interfaces (Figure 2), referred to generally as x-ray reflectivity (XR), including both specular and nonspecular scattering, provides what is arguably the most direct and quantitative method for probing the structure (i.e., atom locations) of the solid–water interface. XR of interfaces is the direct analogue of x-ray crystallography and has been applied to understand a wide range of solid–water interfaces.15–29 The precise time-averaged locations of atoms at the solid–liquid interface within both the solid and water phases can be observed through direct in situ measurements of the intensity and distribution of the scattered x-rays.
The power of XR to probe the solid–liquid interface derives from the simple and robust relationship between the scattering intensity, expressed as the fraction of the incident beam that is reflected, R(Q), and the unknown structure, ρ(r), expressed as the electron density of the interface as a function of position, r, with respect to the origin at the interface. For the case of specular (i.e., mirror-like scattering, |Q| = Qz):
where |Q| = (4π/λ)sin(2θ/2) is the momentum transfer, λ is the x-ray wavelength, 2θ is the total scattering angle, Auc is the surface unit cell area, re = 2.828 × 10–5 Å is the classical electron radius, and z is the height above the interface. As in any crystallographic approach, the ability to know the structure is limited primarily by the crystallographic “phase problem” (that is, while the reflectivity signal can be calculated directly from the electron density, as shown in Equation 1, it is not generally possible to obtain the electron density directly from the measured reflectivity signal).9 Most commonly, the data can be understood by quantitative comparison to calculated intensities based on parameterized models of the interfacial structure. The models must include all relevant aspects of the interfacial structure, including intrinsic factors (i.e., the interfacial water organization), changes to the substrate interfacial structure (including the surface termination, substrate structural relaxations allowed by the broken symmetry associated with the presence of the surface, and reconstructions due to spontaneous symmetry changes), the presence of any adsorbed layers (e.g., ions at charged surfaces), as well as any extrinsic factors such as surface roughness. The field of view of these measurements is defined within the surface plane by the surface lattice spacings, a and b, and is sensitive to the complete density profile along the surface normal direction for heights in the range of –∞ < z < ∞ (including the continuous water profile above the surface, and any changes to the substrate crystal below the interface).
Hydration layers at the solid–water interface
The behavior of water adjacent to various solid surfaces 30 has been well-studied using x-ray scattering approaches, including metal–aqueous electrochemistry,15,16 crystal growth,17 biomineralization,18 metal oxides,19–22 natural minerals,23–25 and hydrophobic interfaces.26–29
In this article, we present a few representative examples that provide insights into the range of interfacial hydration structure profiles that can be observed for surfaces with distinct chemical properties and functionalities (Figure 3). These include the (001) plane of muscovite mica, K2Al4(Al2Si6) O20(OH)4, a planar surface that has a fixed charge; 23 the (001) plane of graphene, a 2D carbon structure that is uncharged and chemically inert; 29 the (110) plane of rutile TiO2, an oxide surface with chemically reactive surface functional groups and a pH-dependent surface charge;21,22 and the (104) plane of calcite, CaCO3, the major cleavage plane of this ionic crystal.24,25,31
The muscovite–water interface
The basal surface of muscovite is representative of the dominant surfaces of many layer-silicate minerals (e.g., micas and clay minerals) in nature. This system is the first for which a distinct interfacial hydration structure was inferred on the basis of oscillatory force–distance curves observed by the surface forces apparatus for water confined between two cylindrically bent muscovite sheets.32,33 The muscovite basal surface is formed by cleaving layers that are held together by electrostatic attraction and therefore does not require the breaking of covalent bonds. Consequently, all surface lattice cations remain fully coordinated at the free surface (Figure 3a). This property leads to a relatively weak chemical interaction of water with the surface. The water–muscovite interaction is controlled by the large fixed surface charge (1 e– per surface unit cell area Auc, where Auc = 46.72 Å2 for muscovite, which corresponds to a charge of –0.34 C/m2). In electrolyte solutions, this surface charge is compensated by the formation of an electrical double layer of cations through a combination of specific adsorption and the formation of a diffuse ion cloud (see discussion below).
The muscovite surface exhibits a fairly complex interfacial hydration structure,23 consisting of two distinct water layers whose heights (at 1.3 Å and 2.5 Å) are understood by the adsorption of water in (or near) a “ditrigonal cavity” (a structural depression within a distorted hexagonal ring formed by six corner-sharing SiO4 tetrahedra) and adsorption of water to the surface oxygens in the basal plane (at height z = 0). The 2D water densities for these two layers are 4.3 H 2O/nm2 and 5.6 H 2O/nm2, respectively, with a combined surface hydration layer density of ~10 H2O/nm2. This is fully consistent with the expectation that interfacial hydration layers should have a 2D density of ~10 H2O/nm2. This primary hydration layer is followed by a weakly modulated hydration structure that extends >1 nm above the surface with a layer spacing of 3.7 ± 0.3 Å. This observation of water layering at an isolated muscovite surface provides a first-order explanation for the oscillatory force–distance profiles observed by the surface forces apparatus.32,33 The observed oscillatory force curves can be interpreted as due to the perturbation of the intrinsic hydration layer structure that is found at each interface as they are forced to interact under confinement between the two surfaces.
The graphene–water interface
The graphene–water interface is perhaps one of the simplest solid–water interfacial systems when viewed from a chemical perspective. The basal surface of graphene carries no charge and is intrinsically hydrophobic (Figure 3b).34 The interfacial water structure at epitaxial graphene (EG) surfaces (grown by thermal decomposition of silicon carbide (001) surface; Figure 3b) for multilayer graphene, Gn (where n ≥ 1) exhibit a primary hydration layer at a height of ~3.1 Å above the graphene surface, followed by a secondary hydration layer at a height of ~6 Å, and a nearly featureless water profile corresponding to the bulk water phase.29 The primary hydration layer height is even greater than that for water above the muscovite basal plane (2.5 Å) and apparently reflects the strongly hydrophobic character of the surface. The primary hydration layer is found to have a water density of 16 H2O/nm2, which is substantially larger than expected based on the simple estimates. EG typically forms with a distribution of graphene layer thickness (typically two or three layers thick). Although the thickness distribution can be characterized by ex situ studies prior to the studies of water structure, it is possible that the water coverage might be overestimated because of the similar values of the water adsorption height (~3.2 Å) and the graphene–graphene spacing (~3.4 Å).
Epitaxial graphene provides a well-defined system for understanding the relationship between hydrophobicity and interfacial water structure. The wettability of EG surfaces can be controlled by the degree of graphenization. Films with two or more graphene layers (e.g., Gn) exhibit the expected hydrophobic behavior with contact angles of ~93° indicative of the intrinsically weak water–graphene interaction. In contrast, a partially graphenized surface, terminated predominantly by the G0 layer, exhibits a substantially smaller contact angle of ~73°, indicative of stronger interactions between water and G0.29 Even though the G0 layer has the same composition as the intrinsic graphene layers, its interactions with water are distinct because of its difference in hybridization (sp3 versus sp2) associated with its bonding to the SiC substrate.35,36 XR studies on a G0-dominant EG sample showed that the structure of water adjacent to G0 is generally similar to that of water adjacent to Gn, but with a smaller average first water layer height of 2.3 Å.29 Ab initio molecular dynamics studies suggest that this apparently smaller water layer height at the G0 surface can be understood as being due to the adsorption of hydroxyls at defect sites on the surface.29
The calcite–water interface
The calcite–water interface is representative of ionic crystals. The (104) cleavage plane has a unit mesh area of 20.2 Å2 and includes one Ca2+ ion and one carbonate group (CO32–). Although the surface is neutral, on average (Figure 3c), each ion at the surface expresses a charge that is not fully screened by adjacent counter ions. These surface groups are undercoordinated (e.g., Ca2+ has an octahedral coordination in the bulk, whereas Ca2+ at the surface is coordinated by five lattice oxygens), which is expected to result in a strong interaction of the ions with the water dipole. This surface, therefore, provides a natural template for the adsorption and organization of water, with space for two water molecules per surface unit cell.
The primary hydration layer at the calcite surface24,25,31 consists of two distinct types of water that are adsorbed at heights of 2.0 Å and 2.9 Å with respect to the average surface height (based on both XR results and classical molecular dynamics [MD] simulations). Both nonspecular XR data and MD simulations reveal that the lower water molecule directly coordinates with the surface Ca ion to complete its coordination shell. That is, water solvates the broken Ca–O bonds that were disrupted by forming the surface. The second water layer hydrates the surface carbonate ion through the formation of a donating hydrogen bond from the water hydrogen to the carbonate oxygen protruding from the surface at a height of ~1 Å. Together, these two water layers form a single space-filling hydration layer with an average height of 2.4 Å and a 2D density of 10.9 H2O/nm2, again as might be expected for the close packing of a dense hydration layer. Beyond this primary hydration layer, a largely featureless water profile is observed.
The rutile–water interface
Rutile TiO2 is representative of many oxides (and other solids) in which the creation of a surface involves the breaking of covalent bonds (i.e., Ti–O bonds for rutile). As is typical of oxide surfaces, the ideally cleaved rutile surface with under-coordinated Ti atoms is energetically unstable under ambient conditions. A substantial reduction in surface energy occurs through its solvation by water, leading to the formation of a low-energy surface defined by the presence of surface functional groups, including terminal oxygen (i.e., Ti–O, or “TO”) and bridging oxygen (i.e., Ti–O–Ti, or “BO”) sites at heights of ±0.4 Å (Figure 3d). These functional groups exhibit a range of protonation states (e.g., Ti–O–, Ti–OH0, Ti–OH2+), leading to a pH-dependent surface charge. The TiO2 (110) surface has a point of zero charge at pH 5.4, where it is thought to be primarily terminated by bare BO sites and doubly protonated TO–H2 sites (but with 30% of the surface sites deprotonated as TO–H).37
The derived vertical water density profile shows that the surface hydration layer is very compact, consisting of what appears to be a single layer of water molecules with an average height of 2.1 Å above the average surface oxygen height.22 Nonspecular XR measurements and MD simulations, however, reveal that this hydration layer consists of at least three distinct configurations of adsorbed water in distinct adsorption geometries that presumably are stabilized by hydrogen bonding with the TO and BO sites. No significant perturbation of the interfacial water structure is observed beyond this first hydration layer (i.e., at heights of >4 Å). This lack of a visible modulation in the water density profile beyond the first adsorbed water layer is not a general characteristic of oxide surfaces. For example, a more structured water layer is observed at the Al2O3(001) and Fe2O3(001) surfaces,20 illustrating how multiple factors contribute to the observed behavior.
Together, these results provide a first-order experimental understanding of the relationship between the solid–water interactions and the organization of water at the solid–water interface. The hydrophobic surface of intrinsic graphene is observed to have the largest height of the first water layer (3.2 Å). In comparison, the average water height at the rutile (110) surface is significantly smaller (2.1 Å). For this specific case of rutile, the strong interaction between the first water layer and the substrate weakens the interaction of this first water layer with subsequent water layers.30 This leads to the macroscopic observation that the hydrated surface appears to be “non-wetting.” A second manifestation of differences in the solid–water interaction is found in the spatial extent of perturbations of the water density profile away from the interface. Whereas graphene and muscovite show modulations that extend to ~10 Å above the surface, in the case of the rutile surface, the water structuring is confined within a height of ~4 Å. The case of calcite is intermediate, with perturbations extending to ~7 Å above the surface.
Inf uence of adsorbed ions at charged solid–water interfaces
The preceding discussion is focused on the behavior of nominally pure water at various types of interfaces. When the interfaces are charged (e.g., the basal surface of muscovite mica), the formation of an electrical double layer neutralizes the surface, through either the specific adsorption of ions or the formation of a diffuse ion profile.7 The impact of these adsorbed ions on the interfacial water structure is illustrated in Figure 4, where the interfacial electron density profiles of muscovite in contact with water containing various salts (including Na+ versus Cs+, and Zn2+ versus Ba2+)38,39 are shown. In the case of monovalent ions (Figure 4a), there is an extended hydration structure in the presence of Na+, including approximately four distinct layers extending ~1 nm into solution (the location of Na+ in this system is not known). This modulation is not observed in the presence of a different monovalent ion, Cs+ (here, the high-density peak at 2.3 Å is due to specific adsorption of Cs+). More dramatic changes are observed in the presence of divalent ions (Figure 4b), including multiple distinct hydration layers. Even when considering the contribution of each ion to the electron density profiles (shaded regions), it is apparent that the interfacial hydration structures for these systems are distinct, and these differences are controlled, at least in part, by the ion properties (e.g., charge, ion size, and hydration energy).
Summary and perspective
The examples presented here illustrate how the relationships between solid–water interactions and the observed interfacial water structure can be revealed through the use of high-resolution synchrotron x-ray reflectivity measurements. These results, when complemented by high-level computational studies (e.g., density functional theory and molecular dynamics simulations), provide a robust approach to test and extend the current understanding of these systems.24,29,37,40–42 Although the experimental results clearly indicate that water is ordered vertically and laterally near the solid–water interface, the ordered structures are not well-described as one of the known water ice structures (i.e., they are not “ice-like”).13 Instead, the observed hydration structures are dictated by the characteristics of the solid surface (e.g., the arrangement and coordination of atoms and the charge on the surface) and are observed to be sensitive to the adsorption of ions. This represents an important first step toward understanding the reactivity of solid–water interfaces, including how it influences the adsorption of ions, the heterogeneous growth of films, and the reactivity of the substrate solid (including dissolution and growth). More generally, it provides a basis for understanding the challenging question of how water structure is perturbed by confinement, as is now being studied.43
References
K. Lonsdale, Proc. R. Soc. Lond. A 247, 424 (1958).
F. Franks, Water: A Comprehensive Treatise (Plenum Publishing, New York, 1982), p. 484.
M.C.R. Symons, Nature 239, 257 (1972).
Y.L. Xie, K.F. Ludwig, G. Morales, D.E. Hare, C.M. Sorensen, Phys. Rev. Lett. 71, 2050 (1993).
D.T. Richens, The Chemistry of Aqua Ions (Wiley, Chichester, UK, 1997).
A. Zangwill, Physics at Surfaces (Cambridge University Press, Cambridge, UK, 1988).
W. Stumm, Chemistry of the Solid–Water Interface: Processes at the Mineral– Water and Particle–Water Interface in Natural Systems (Wiley, New York, 1992).
A.J. Gratz, P. Bird, Geochim. Cosmochim. Acta 57, 965 (1993).
I.K. Robinson, D.J. Tweet, Rep. Prog. Phys. 55, 599 (1992).
P. Fenter, Rev. Mineral. Geochem. 49, 149 (2002).
D.A. Doshi, E.B. Watkins, J.N. Israelachvili, J. Majewski, Proc. Natl. Acad. Sci. U.S.A. 102, 9458 (2005).
D. Schwendel, T. Hayashi, R. Dahint, A. Pertsin, M. Grunze, R. Steitz, F. Schreiber, Langmuir 19, 2284 (2003).
Q. Du, E. Freysz, Y.R. Shen, Science 264, 826 (1994).
V. Ostroverkhov, G.A. Waychunas, Y.R. Shen, Chem. Phys. Lett. 386, 144 (2004).
J. Wang, B.M. Ocko, A.J. Davenport, H.S. Isaacs, Phys. Rev. B: Condens. Matter 46, 10321 (1992).
M.F. Toney, J.N. Howard, J. Richer, G.L. Borges, J.G. Gordon, O.R. Melroy, D.G. Wiesler, D. Yee, L.B. Sorensen, Nature 368, 444 (1994).
M.F. Reedijk, J. Arsic, F.F.A. Hollander, S.A. de Vries, E. Vlieg, Phys. Rev. Lett. 90, 066103 (2003).
J. Arsic, D. Kaminski, P. Poodt, E. Vlieg, Phys. Rev. B. 69, 245406 (2004).
P.J. Eng, T.P. Trainor, G.E. Brown, G.A. Waychunas, M. Newville, S.R. Sutton, M.L. Rivers, Science 288, 1029 (2000).
J.G. Catalano, Geochim. Cosmochim. Acta 75, 2062 (2011).
Z. Zhang, P. Fenter, L. Cheng, N.C. Sturchio, M.J. Bedzyk, M. Predota, A. Bandura, J.D. Kubicki, S.N. Lvov, P.T. Cummings, A.A. Chialvo, M.K. Ridley, P. Benezeth, L. Anovitz, D.A. Palmer, M.L. Machesky, D.J. Wesolowski, Langmuir 20, 4954 (2004).
Z. Zhang, P. Fenter, N.C. Sturchio, M.J. Bedzyk, M.L. Machesky, D.J. Wesolowski, Surf. Sci. 601, 1129 (2007).
L. Cheng, P. Fenter, K.L. Nagy, M.L. Schlegel, N.C. Sturchio, Phys. Rev. Lett. 87, 156103 (2001).
P. Fenter, S. Kerisit, P. Raiteri, J.D. Gale, J. Phys. Chem. C 117, 5028 (2013).
P. Fenter, N.C. Sturchio, Geochim. Cosmochim. Acta 97, 58 (2012).
M. Mezger, S. Schöder, H. Reichert, H. Schröder, J. Okasinski, V. Honkimäki, J. Ralston, J. Bilgram, R. Roth, H. Dosch, J. Chem. Phys. 128, 244705 (2008).
A. Poynor, L. Hong, I.K. Robinson, S. Granick, Z. Zhang, P.A. Fenter, Phys. Rev. Lett. 97, 266101 (2006).
A. Uysal, M.Q. Chu, B. Stripe, A. Timalsina, S. Chattopadhyay, C.M. Schlepütz, T.J. Marks, P. Dutta, Phys. Rev. B. 88, 035431 (2013).
H. Zhou, P. Ganesh, V. Presser, M.C.F. Wander, P. Fenter, P.R.C. Kent, D.E. Jiang, A.A. Chialvo, J. McDonough, K.L. Shuford, Y. Gogotsi, Phys. Rev. B. 85, 035406 (2012).
P. Fenter, N.C. Sturchio, Prog. Surf. Sci. 77, 171 (2004).
P. Geissbühler, P. Fenter, E. DiMasi, G. Srajer, L.B. Sorensen, N.C. Sturchio, Surf. Sci. 573, 191 (2004).
J.N. Israelachvili, R.M. Pashley, Nature 306, 249 (1983).
R.M. Pashley, J.N. Israelachvili, J. Colloid Interface Sci. 101, 511 (1984).
Y.J. Shin, Y.Y. Wang, H. Huang, G. Kalon, A.T.S. Wee, Z.X. Shen, C.S. Bhatia, H. Yang, Langmuir 26, 3798 (2010).
J.D. Emery, B. Detlefs, H.J. Karmel, L.O. Nyakiti, D.K. Gaskill, M.C. Hersam, J. Zegenhagen, M.J. Bedzyk, Phys. Rev. Lett. 111, 215501 (2013).
K.V. Emtsev, F. Speck, T. Seyller, L. Ley, J.D. Riley, Phys. Rev. B. 77, 155303 (2008).
D.J. Wesolowski, J.O. Sofo, A.V. Bandura, Z. Zhang, E. Mamontov, M. Předota, N. Kumar, J.D. Kubicki, P.R.C. Kent, L. Vlcek, M.L. Machesky, P.A. Fenter, P.T. Cummings, L.M. Anovitz, A.A. Skelton, J. Rosenqvist, Phys. Rev. B. 85, 167401 (2012).
S.S. Lee, P. Fenter, K.L. Nagy, N.C. Sturchio, Langmuir 28, 8637 (2012).
S.S. Lee, P. Fenter, C. Park, N.C. Sturchio, K.L. Nagy, Langmuir 26, 16647 (2010).
A.V. Bandura, D.G. Sykes, V. Shapovalov, T.N. Troung, J.D. Kubicki, R.A. Evarestov, J. Phys. Chem. B 108, 7844 (2004).
S. Kerisit, S.C. Parker, J. Am. Chem. Soc. 126, 10152 (2004).
S.H. Park, G. Sposito, Phys. Rev. Lett. 89, 085501 (2002).
S. Chodankar, E. Perret, K. Nygård, O. Bunk, D.K. Satapathy, R.M. Espinosa Marzal, T.E. Balmer, M. Heuberger, J.F. van der Veen, Europhys. Lett. 99, 26001 (2012).
Acknowledgements
The work described herein is the product of the contributions of many people over many years. Of particular note are the long-term collaborations with Neil C. Sturchio, Kathryn L. Nagy, David J. Wesolowski, and Michael J. Bedzyk, as well as the many current and past members of the Interfacial Processes Group at Argonne National Laboratory. This material is primarily based upon work supported by the US Department of Energy, Office of Science, Office of Basic Energy Sciences, Division of Chemical Sciences, Biosciences, and Geosciences (Geoscience subprogram, Nicholas Woodward), with the work on TiO2 done through a multi-institutional collaboration led by Oak Ridge National Laboratory. Work on graphene-water interactions was supported as part of the Fluid Interface Reactions, Structures and Transport (FIRST) Center, an Energy Frontier Research Center funded by the US Department of Energy, Office of Science, Office of Basic Energy Sciences. Measurements were performed at the Advanced Photon Source, a DOE Office of Science User Facility. The manuscript was created at UChicago Argonne, LLC, Operator of Argonne National Laboratory. Argonne, a US Department of Energy Office of Science laboratory, is operated under Contract DE-AC02-06CH11357. The US Government retains for itself, and others acting on its behalf, a paid-up nonexclusive, irrevocable worldwide license in said article to reproduce, prepare derivative works, distribute copies to the public, and perform publicly and display publicly, by or on behalf of the Government.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Fenter, P., Lee, S.S. Hydration layer structure at solid–water interfaces. MRS Bulletin 39, 1056–1061 (2014). https://doi.org/10.1557/mrs.2014.252
Published:
Issue Date:
DOI: https://doi.org/10.1557/mrs.2014.252