Abstract
Based on previous work studying complex microreactors, it was desired to further improve the mixing efficiency by varying the mixing unit design for fast liquid-liquid reactions. Different flow regimes were studied, including slug flow, parallel flow, and drop flow. The two-phase hydrolysis of 4-nitrophenyl acetate in sodium hydroxide solution was used to evaluate the overall volumetric mass transfer coefficients (Korga) as a function of the average rate of energy dissipation (ε) for each microreactor design and all flow regimes. The liquid-liquid systems investigated used n-butanol or toluene as the organic phase solvent and a 0.5-M NaOH aqueous solution. The use of surfactant was also investigated with the toluene- water system. All microreactor geometry designs were based on contraction–expansion repeating units with asymmetric obstacles to aid the breakup of slugs and desynchronize the recombination of split streams. The investigated designs were chosen to avoid the formation of the parallel flow regime, contrary to curvature-based mixing-unit designs. The microreactor design can then be optimized to reduce the ε required to reach drop flow, since Korga has been found to be constant at equal ε for a given solvent system in this flow regime, regardless of the reactor selection. Additionally, the “3/7th” scaleup rule was applied and confirmed with the LL-Triangle mixer. It was found that, for low interfacial-tension systems (i.e., n-butanol-water), the onset of drop flow occurred at a lower ε for the LL-Triangle mixer when compared with the Sickle or LL-Rhombus mixers.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Kumar, V.; Paraschivoiu, M.; Nigam, K. D. P. Chem. Eng. Sci. 2011, 66, 1329–1373.
Holvey, C. P.; Roberge, D. M.; Gottsponer, M.; Kockmann, N.; Macchi, A. Chem. Eng. Process. Process Intensif. 2011, 50, 1069–1075.
Plouffe, P.; Anthony, R.; Donaldson, A.; Roberge, D. M.; Kockmann, N.; Macchi, A. In ASME 2012 10th International Conference on Nanochannels, Microchannels, & Minichannels; Rio Grande, Puerto Rico, 2012.
Kockmann, N.; Gottsponer, M.; Roberge, D. M. Chem. Eng. J. 2011, 167, 718–726.
Kashid, M.; Renken, A.; Kiwi-Minsker, L. Chem. Eng. J. 2011, 167, 436–443.
Falk, L.; Commenge, J. M. Chem. Eng. Sci. 2010, 65, 405–411.
Hessel, V.; Kralisch, D.; Kockmann, N.; Noel, T.; Wang, Q. ChemSusChem 2013, 6, 746–789.
Ducry, L.; Roberge, D. M. Angew. Chem., Int. Ed. 2005, 44, 7972–7975.
Kashid, M. N.; Kiwi-Minsker, L. Ind. Eng. Chem. Res. 2009, 48, 6465–6485.
Dummann, G.; Quittmann, U.; Gröschel, L.; Agar, D. W.; Wörz, O.; Morgenschweis, K. Catal. Today 2003, 79–80, 433–439.
Plouffe, P.; Roberge, D. M.; Macchi, A. Chem. Eng. J. 2016, 300, 9–19.
Plouffe, P.; Roberge, D. M.; Sieber, J.; Bittel, M.; Macchi, A. Chem. Eng. J. 2016, 285, 605–615.
Plouffe, P.; Bittel, M.; Sieber, J.; Roberge, D. M.; Macchi, A. Chem. Eng. Sci. 2016, 143, 216–225.
Plouffe, P.; Macchi, A.; Roberge, D. M. Org. Process Res. Dev. 2014, 18, 1286–1294.
Nieves-Remacha, M. J.; Kulkarni, A. A.; Jensen, K. F. Ind. Eng. Chem. Res. 2013, 52, 8996–9010.
Lavric, E. D.; Woehl, P. Chem. Today 2009, 27, 45–48.
Kashid, M. N.; Renken, A.; Kiwi-Minsker, L. Ind. Eng. Chem. Res. 2011, 50, 6906–6914.
Nieves-Remacha, M. J.; Kulkarni, A. A.; Jensen, K. F. Ind. Eng. Chem. Res. 2012, 51, 16251–16262.
Parker, V. D. J. Phys. Org. Chem. 2006, 19, 714–724.
Ahmed-Omer, B.; Barrow, D.; Wirth, T. Chem. Eng. J. 2008, 135, S280–S283.
Ahmed, B.; Barrow, D.; Wirth, T. Adv. Synth. Catal. 2006, 348, 1043–1048.
Potter, M. C.; Wiggert, D. C.; Ramadan, B. H. Mechanics of Fluids, 4th ed.; Cengage Learning: Stamford, CT, 2011.
Clift, R.; Grace, J. R.; Weber, M. E. Bubbles, Drops, and Particles; Dover Publications, Inc.: Mineola, New York, 1978.
Koide, K.; Yamazoe, S.; Harada, S. J. Chem. Eng. Japan 1985, 18, 287–292.
Jeng, J. J.; Maa, J. R.; Yang, Y. M. Ind. Eng. Chem. Process Des. Dev. 1986, 25, 974–978.
Eckenfelder, W. W.; Barnhart, E. L. AIChE J. 1961, 7, 631–634.
Backes, H. M.; Ma, J. J.; Bender, E.; Maurer, G. Chem. Eng. Sci. 1990, 45, 275–286.
Berthod, A.; Schmitt, N. Talanta 1993, 40, 1489–1498.
Donahue, D. J.; Bartell, F. E. J. Phys. Chem. 1952, 56, 480–484.
Alexandrov, A. A. 14th Int. Conf. Prop. Water Steam 2005, 86–90.
Author information
Authors and Affiliations
Corresponding authors
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made.
The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder.
To view a copy of this licence, visit https://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Mielke, E., Roberge, D.M. & Macchi, A. Microreactor Mixing-Unit Design for Fast Liquid-Liquid Reactions. J Flow Chem 6, 279–287 (2016). https://doi.org/10.1556/1846.2016.00026
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1556/1846.2016.00026