Abstract
The action of the Schwinger mechanism in pure Yang–Mills theories endows gluons with an effective mass, and, at the same time, induces a measurable displacement to the Ward identity satisfied by the three-gluon vertex. In the present work we turn to Quantum Chromodynamics with two light quark flavors, and explore the appearance of this characteristic displacement at the level of the quark–gluon vertex. When the Schwinger mechanism is activated, this vertex acquires massless poles, whose momentum-dependent residues are determined by a set of coupled integral equations. The main effect of these residues is to displace the Ward identity obeyed by the pole-free part of the vertex, causing modifications to its form factors, and especially the one associated with the tree-level tensor. The comparison between the available lattice data for this form factor and the Ward identity prediction reveals a marked deviation, which is completely compatible with the theoretical expectation for the attendant residue. This analysis corroborates further the self-consistency of this mass-generating scenario in the general context of real-world strong interactions.
Similar content being viewed by others
Avoid common mistakes on your manuscript.
1 Introduction
In recent years, the generation of a mass scale in the gauge sector of Quantum Chromodynamics (QCD) [1] through the action of the Schwinger mechanism (SM) [2, 3] has emerged as a particularly appealing and robust notion [4,5,6,7,8,9,10,11,12,13,14]; for alternative approaches see [15,16,17,18,19,20,21,22,23,24,25,26,27]. In its most general formulation, the SM is based on the key observation that, even if a mass is forbidden at the level of the fundamental Lagrangian, a gauge boson may become massive if its vacuum polarization develops a pole at zero momentum transfer (“massless pole”). Such massless poles may occur for a variety of reasons, depending on the dimensionality of space-time and the dynamical details of each theory [28,29,30,31].
The non-Abelian version of the SM operating in Yang–Mills theories proceeds via the inclusion of massless scalar excitations in the fundamental vertices of the theory [4,5,6,7, 32,33,34], thus altering profoundly their analytic properties. These excitations are longitudinally coupled, and arise dynamically, as color-carrying bound states of two gluons or a ghost-antighost pair [7, 10,11,12,13,14, 35, 36]. Thanks to the functional equations that couple propagators and vertices [10,11,12,13,14,15, 37,38,39,40,41,42,43,44], these structures make their way to the gluon self-energy, providing the kinematic basis for the appearance of a mass [7, 35, 36].
Especially important in this context is the residue function associated with the pole of the three-gluon vertex, denoted by \({{\mathbb {C}}}(r^2)\) [11,12,13,14]. This function acts as the Bethe–Salpeter (BS) amplitude that controls the formation of the aforementioned bound states out of a pair of gluons [7, 35, 36]. In addition, it is intimately connected with a characteristic displacement of the Ward identityFootnote 1 (WI) satisfied by the pole-free part of the three-gluon vertex, namely the component measured on the lattice [47,48,49,50,51,52,53]. In particular, the form factor of the three-gluon vertex associated with the so-called “soft-gluon limit” is shown to deviate from the WI prediction - the correct result when the SM is inactive - precisely by an amount \({{\mathbb {C}}}(r^2)\). Most importantly, as was established in [11, 12], this displacement is clearly observed in the lattice data: the \({{\mathbb {C}}}(r^2)\) reconstructed is unequivocally nonvanishing, and in excellent agreement with the BS prediction [11].
In the present work we consider for the first time the appearance of an analogous effect at the level of the fully-dressed quark–gluon vertex, thus implementing the pending generalization of the SM from quarkless QCD (pure Yang–Mills theory) to the case of QCD with two light quark flavors (\(N_f=2\)). We emphasize that the quark–gluon vertex is a crucial component of the QCD dynamics, and has been studied extensively from the perturbative point of view [54,55,56,57,58,59], by means of continuous non-perturbative methods [40, 60,61,62,63,64,65,66,67,68,69,70,71,72,73,74,75,76,77,78,79,80,81,82,83,84,85,86], and through numerous lattice simulations [87,88,89,90,91,92,93,94,95,96,97].
The central result of the present work may be summarized by stating that the action of the SM endows the quark–gluon vertex with a nontrivial pole content. The general pole structure admitted by Lorentz invariance and charge conjugation symmetry is comprised by three form factors, which, in the soft-gluon limit, are the quark–gluon vertex counterparts of the \({{\mathbb {C}}}(r^2)\). In this limit, the essential dynamics are described by a set of coupled BS equations, which account for the fact that the inclusion of active quarks permits the additional formation of composite scalars out of quark–antiquark pairs.
The numerical treatment of these equations demonstrates the nonvanishing nature of the residue functions associated with the poles of the quark–gluon vertex. Moreover, the modifications produced by their presence to the unquenched version of \({{\mathbb {C}}}(r^2)\) are rather minimal, and the mass-generating aspects of the SM remain practically unaltered. These findings clearly validate the expectation [12] that the gluon mass generation in the presence of dynamical quarks is qualitatively similar to the pure Yang–Mills case. In fact, our preliminary analysis is compatible with the lattice results of [98, 99], which indicate that the unquenched gluon mass is larger than the quenched one.
Interestingly enough, however, the most important effect of these novel residue functions is the distinctive displacement that they produce to the WI satisfied by the pole-free part of the quark–gluon vertex. Focusing on the form factor associated with the classical tensorial structure, \(\gamma _{\alpha }\), this displacement introduces a sharp difference between the result computed on the lattice, \(\lambda _1(p^2)\), and the prediction of the WI in the absence of the SM, \(\lambda _1^{\star }(p^2)\).
The above predictions may be tested by appealing to the available lattice data for this form factor [92]. In particular, we focus on the two asymmetric lattices, denominated “L08” and “L07” in [92], which have superior statistics and small current quark masses. The detailed comparison between \(\lambda _1(p^2)\) and \(\lambda _1^{\star }(p^2)\) produces a clear signal of \(8\sigma \) and \(6\sigma \), respectively, as shown in Fig. 10. In fact, the resulting curves for the displacement function are in very good agreement with the BS prediction. We consider these novel results as an additional indication of the operation of the SM in QCD.
The article is organized as follows. In Sect. 2 we review the most salient features of the SM in the context of a Yang–Mills theory, focusing on the displacement function associated with the three-gluon vertex, which serves as the prototype for the ensuing construction. In Sect. 3 we demonstrate how the action of the SM modifies the WI prediction for the form factors of the quark–gluon vertex in the soft-gluon limit, and introduce the corresponding displacement functions. In Sect. 4 we solve the system of coupled BS equations that determines the set of displacement functions associated with the three-gluon and quark–gluon vertices. Then, in Sect. 5 we present the central result of the present work. In particular, we determine the displacement function associated with the tree-level component of the quark–gluon vertex from the difference between the lattice data and the WI prediction. In Sect. 6 we present our discussion and conclusions. Finally, in three Appendices we provide plots and numerical fits for the lattice inputs used in our computations, explain the implementation of the necessary transitions between the three main renormalization schemes employed in the literature, and give some technical details on the Schwinger-Dyson equation (SDE) determination of a special form factor of the ghost-gluon vertex.
2 Schwinger mechanism and ward identity displacement
In this section we review the main concepts of the WI displacement of the three-gluon vertex, which is induced by the action of the SM. These considerations set the stage for accomplishing the main objective of this work, namely study of the same effect in the case of the quark–gluon vertex.
In the Landau gauge that we use throughout this work, the gluon propagator, \(\Delta ^{ab}_{\mu \nu }(q)\), has the formFootnote 2\(\Delta ^{ab}_{\mu \nu }(q)=-i\delta ^{ab}\Delta _{\mu \nu }(q)\), with
The momentum evolution of \(\Delta (q^2)\) in the continuum is determined by the corresponding SDE, given by
where \(\Pi _{\mu \nu }(q) = q^2 \mathbf{\Pi }(q^2) P_{\mu \nu }(q)\) is the transverse gluon self-energy, shown diagrammatically in Fig. 1.
A pivotal component of this SDE is the fully-dressed three-gluon vertex, \(\mathrm{{I}}\!\Gamma ^{abc}_{\alpha \mu \nu }(q,r,k)\), which may be cast in the form
where g is the gauge coupling, \(f^{abc}\) are the SU(3) structure constants, and \(q+r+k = 0\).
It turns out that the infrared saturation of the gluon propagator hinges crucially on the special analytic structure of \(\mathrm{{I}}\!\Gamma _{\alpha \mu \nu }\). To appreciate this point, recall that, according to the SM, if \(\mathbf{\Pi }(q^2)\) acquires a pole with a positive residue (Euclidean space), \(\lim _{q^2 \rightarrow 0} \mathbf{\Pi }(q^2) = m^2/q^2\), then \(\Delta ^{-1}(0) = m^2\), i.e., the gluon propagator picks up a mass [2,3,4,5,6, 11,12,13,14, 29,30,34]. \(\mathrm{{I}}\!\Gamma _{\alpha \mu \nu }\) provides precisely this pole,Footnote 3 as a result of specific nonperturbative dynamics: composite scalar excitations are formed ( e.g., out of a pair of gluons), which carry color, are longitudinally coupled, and have vanishing mass [4,5,6,7, 11,12,13, 32,33,34]. As a result, \(\mathrm{{I}}\!\Gamma _{\alpha \mu \nu }\) may be cast in the form (see upper row of Fig. 2)
where \(\Gamma _{\alpha \mu \nu }(q,r,k)\) denotes the pole-free part, while \(V_{\alpha \mu \nu }(q,r,k)\) contains longitudinal poles of the type \(q^{\alpha }/q^2\), \(r^{\mu }/r^2\), \(k^{\nu }/k^2\), and products thereof [100]. The longitudinal nature of \(V_{\alpha \mu \nu }(q,r,k)\) is a direct consequence of the general form of the gluon-scalar transition amplitude \(I_{\alpha } (q)\) (see Fig. 2), namely \(I_{\alpha } (q) = q_{\alpha } I(q^2)\), imposed by Lorentz symmetry [7]; it leads to the important property \({P}_{\alpha '}^{\alpha }(q){P}_{\mu '}^{\mu }(r){P}_{\nu '}^{\nu }(k) V_{\alpha \mu \nu }(q,r,k) = 0\). This last relation eliminates the poles from lattice simulations of \(\mathrm{{I}}\!\Gamma _{\alpha \mu \nu }\) in the Landau gauge; nonetheless, characteristic finite effects survive, which manifest themselves as displacements of certain key quantities.
Focusing on the leading pole in the q-channel, we have
where the ellipsis absorbs all remaining pole contributions, which get annihilated upon the contraction by the projectors \(P^{\mu '\mu }(r)\) or \(P^{\nu '\nu }(k)\).
The kinematic limit relevant in this study is that of \(q\rightarrow 0\). A detailed analysis [9] shows that \(V_1(0,r,-r) = 0\), and the Taylor expansion of \( V_{1} (q,r,k)\) around \(q= 0\) yields
where \({{\mathbb {C}}}(r^2):= [\partial V_{1} (q,r,k)/\partial k^2]_{q = 0}\).
The function \({{\mathbb {C}}}(r^2)\) is of central importance in this approach, playing three key roles:
(i) \({{\mathbb {C}}}(r^2)\) is the BS amplitude describing the bound-state formation of a massless colored scalar out of a pair of gluons. In particular, \({{\mathbb {C}}}(r^2)\) is obtained as the nontrivial solution of an appropriate linear and homogeneous BS equation, deduced from the SDE of \(\mathrm{{I}}\!\Gamma _{\alpha \mu \nu }\) in the limit \(q\rightarrow 0\).
(ii) The pole \(1/q^2\) appearing in Eq. (2.5) is transmitted to \(\mathbf{\Pi }(q^2)\) via the gluon SDE of Eq. (2.2), triggering the SM. The gluon mass is then determined by integrals involving \({{\mathbb {C}}}(r^2)\), of the general formFootnote 4
(iii) If we define the projector \(\mathcal{T}_{\mu '\nu '}^{\mu \nu }(r,k):= P_{\mu '}^{\mu }(r)P_{\nu '}^{\nu }(k)\), the STI satisfied by \(\mathrm{{I}}\!\Gamma _{\alpha \mu \nu }(q,r,k)\) may be cast in the form
where \(F(q^2)\) is the ghost dressing function, and \(H_{\nu \mu }(k,q,r)\) the ghost-gluon kernel. Note that, by virtue of Eqs. (2.4) and (2.5), the l.h.s. of Eq. (2.8) becomes
When the limit \(q\rightarrow 0\) of both sides of Eq. (2.8) is taken, one obtains the corresponding WI, which is tantamount to the so-called “soft-gluon limit” of the three-gluon vertex. In doing so, Eq. (2.6) is triggered and \({{\mathbb {C}}}(r^2)\) makes its appearance. Moreover, as has been shown in detail in [53],
where \( L _{{sg}}(r^2)\) is precisely the form factor measured on the lattice through the ratio
where \(\Gamma _0^{\alpha \mu \nu }\) is the tree-level expression of the three-gluon vertex, given by
The final upshot of these considerations is that the function \({{\mathbb {C}}}(r^2)\) leads to the displacement of the soft-gluon limit according to (Euclidean space)
where
is the theoretical predictions for the same form factor when the SM is turned off.
Most importantly, as has been established recently in [12], the difference between \( L _{{sg}}(r^2)\) and \( L _{{sg}}^{\!\star }(r^2)\) corresponds to a clearly nonvanishing \({{\mathbb {C}}}(r^2)\), whose shape is absolutely compatible with that obtained in (i), as shown in Fig. 3.
As we will see in the next section, the SM produces a displacement analogous to that of Eq. (2.13) in the form factors of the quark–gluon vertex.
We close this introductory section by pointing out that, due to its multiple roles, the function \({{\mathbb {C}}}(r^2)\) receives a variety of names, which, depending on the situation, emphasize different physical aspects; the terminology employed and its origin is summarized in Table 1. Completely analogous terminology is employed for the corresponding quantities associated with the quark–gluon vertex, introduced in the next section.
3 Quark–gluon vertex and displaced soft-gluon limit
The previous considerations have been carried out in the realm of pure Yang–Mills theories, or quarkless QCD. We now turn to the main part of this study, and consider a real-world version of QCD, with two light quark flavors.
In this case, the main modification with respect to the Yang–Mills case is the inclusion of the fully-dressed quark–gluon vertex, \(\mathrm{{I}}\!\Gamma ^{a}_{\alpha }(q,p_2,-p_1)\), which may be cast in the form
where the \(\lambda ^a\) denote the standard Gell-Mann matrices, and the four-momenta satisfy the relation \(q+p_2-p_1=0\).
At tree-level, \(\mathrm{{I}}\!\Gamma _\alpha (q,p_2,-p_1)\) acquires the standard expression
The activation of the SM generates longitudinal poles in the only channel that carries a Lorentz index, namely the q-channel. Then, as shown in the bottom row of Fig. 2, the quark–gluon vertex is composed by two distinct pieces,
where \(\Gamma _\alpha (q,p_2,-p_1)\) is the pole-free part, and
is the pole term.
The amplitude \(Q(q,p_2,-p_1)\) may be decomposed in a standard Dirac basis according to
where \(\mathbb {I}\) is the \(4\times 4\) identity matrix in the Dirac space, \({\tilde{\sigma }}^{\mu \nu } =1/2[\gamma ^\mu ,\gamma ^\nu ]\), and we use the short-hand notation \(Q_i \equiv Q_i(q^2,p_2^2,p_1^2)\).
3.1 Schwinger mechanism turned off
Let us suppose that the SM is not active, such that \(V_\alpha (q,p_2,\)\(-p_1)=0\); then, from Eq. (3.3) we have that \(\mathrm{{I}}\!\Gamma _\alpha (q,p_2,-p_1)\)\( = \Gamma _\alpha (q,p_2,-p_1)\), i.e., the full vertex is pole-free. Then, consider the STI triggered when the quark–gluon vertex \(\Gamma _\alpha (q,p_2,-p_1)\) is contracted by the gluon momentum \(q^\alpha \), namely [37, 38]
where \(S^{ab}(p) = i \delta ^{ab}S(p)\) is the quark propagator [79, 102,103,104,105,106,107,108,109,110,111,112,113]
In addition, \(H(q,p_2,-p_1)\) is the quark-ghost scattering kernel [see upper panel of Fig. 4], and \(\overline{H}(-q,p_1,-p_2)\) its “conjugate”, whose relation to H is explained in detail in [80] [see discussion around Eq. (2.5)]. Note that the color structure has been factored out, setting \(H^{a} = -g\, (\lambda ^a/2) H\).
Next, we expand both sides of Eq. (3.6) around \(q=0\), with \(p_1 = p_2 = p\); this is tantamount to determining the WI associated with the STI of Eq. (3.6). It is clear that the zeroth order term vanishes on both sides; then, the matching of the coefficients multiplying the terms linear in q yields the aforementioned WI.
We start by noting that the term linear in q on the l.h.s of Eq. (3.6) is simply \(q^\alpha \Gamma _\alpha (0,p,-p)\), where \(\Gamma _\alpha (0,p,-p)\) is the soft-gluon limit of the quark–gluon vertex. The most general Lorentz decomposition of the vertex \(\Gamma _\alpha (0,p,-p)\) is given by
where \(\Gamma _i(p^2)\) are the form factors in the soft-gluon limit. However, due to charge conjugation symmetry [92], \(\Gamma _4(p^2)\) vanishes identically, thus reducing the number of relevant form factors down to three.
In the Landau gauge, the expansion of the r.h.s. of Eq. (3.6) around \(q=0\) is facilitated by setting [78]
where \(Z_H\) is the quark-ghost kernel renormalization constant, which is finite in Landau gauge [45]. The forms of the \(K_\alpha \) and \(\overline{K}_\alpha \) have been given in [78]. Thus, the first two terms in the Taylor expansion of these kernels are given by
where, employing the same basis as in Eq. (3.8), we find
with \( K_i(p^2)\) being the form factors. In addition, we use the following expansion for the inverse quark propagator,
where the short-hand notation \(f{'}(p^{2}):= {{ df}(p^{2})}/{d p^{2}}\) is used.
Then, the matching of the terms on the two sides of Eq. (3.6) expresses the form factors \(\Gamma _i(p^2)\) in terms of the functions \(\{A,B,F,K_i\}\). Converting the results to Euclidean space by means of standard transformation rules, and setting \(\lambda _i^{\star }(p^2):= \Gamma _i^E(p^2_{{\scriptscriptstyle E}})\), we obtain
Note that Eq. (3.13) coincides with the Euclidean form of Eq. (4.3) in [78] up to redefinitions.Footnote 5 Also, note that [78] employed explicitly the Taylor renormalization scheme, where \(Z_H = 1\) [45].
3.2 Schwinger mechanism turned on
Let us now restore the full content of Eq. (3.3), i.e., allow for the presence of massless poles in the fundamental vertices of the theory. With the Schwinger mechanism activated, the form of the STI remains intact [4, 9]: the divergence of the full vertex, now \(\mathrm{{I}}\!\Gamma _\alpha =\Gamma _\alpha + V_\alpha \), is still given by the r.h.s. of Eq. (3.6). Since \(q^\alpha V_\alpha = Q\), the STI satisfied by the pole-free part of the vertex (the one simulated on the lattice) is displaced with respect to Eq. (3.6), namely
Consequently, the form factors of the vertex \(\Gamma _\alpha \) in the presence of the Schwinger mechanism, to be denoted by \(\lambda _i\), will be also displaced with respect to the \(\lambda _i^{\star }\) given in Eq. (3.13). To determine this displacement in detail, the construction leading to Eq. (3.13) must be supplemented by the linear contributions arising from the Taylor expansion of \(Q(q,p_2,-p_1)\) around \(q=0\).
To that end, note that, since at \(q=0\) all other terms in Eq. (3.14) vanish, the condition \(Q(0,p,-p) = 0\) must be fulfilled. Substituting \(q=0\) into Eq. (3.5), and setting \(Q_i (0,p^2,p^2):=Q_i(p^2)\), we obtain the constraints
This argument leaves \(Q_4(p^2)\) undetermined; however, charge conjugation symmetry forces \(Q_4(p^2)\) to vanish, \(Q_4(p^2)=0\).
Thus, the Taylor expansion of \(Q(q,p_2,-p_1)\) is given by
and from Eq. (3.5) we find
where we have introduced
Then, combining Eqs. (3.13) and (3.16), we may easily determine from Eq. (3.14) the displacement of the vertex form factors when the SM is active, namely
The above relations are the direct analogue of Eqs. (2.13) and (2.14) for the case of the quark–gluon vertex; \(Q_3(p^2)\), \({{\mathbb {Q}}}_{2+3}(p^2)\), and \({{\mathbb {Q}}}_1(p^2)\) are the corresponding displacement functions.
We emphasize that the \(\lambda _i(p^2)\) capture the full dynamical content of the theory, in the sense that they take into account the action of the SM. Therefore, if the SM is realized as described here, it is the \(\lambda _i(p^2)\), and not the \(\lambda _i^{\star } (p^2)\), that should coincide with the results obtained for these form factors from lattice QCD. Let us now suppose that the \(\lambda _i^{\star } (p^2)\) were determined through Eq. (3.13), using lattice ingredients for all (or most) intermediate calculations. Then, if a statistically significant discrepancy is found between the \(\lambda _i^{\star } (p^2)\) and the lattice \(\lambda _i(p^2)\), it is natural to attribute it to the presence of the displacement functions. Such an observation becomes even more compelling if the observed signal displays a momentum dependence compatible with the BS prediction for the corresponding amplitudes/displacement functions, as happens in the case of pure Yang–Mills [12] (see Fig. 3). As we demonstrate in the rest of this article, this is indeed what happens also in the case of QCD with \(N_f=2\).
4 Dynamical determination of the displacement functions
In order to determine the numerical importance of the displacements exhibited in Eq. (3.19), in this section we compute the displacement functions from the BS equations that they obey (Fig. 5).
4.1 System of Bethe–Salpeter equations
The starting point of this analysis is the coupled system of SDEs satisfied by the vertices \(\mathrm{{I}}\!\Gamma _{\alpha \mu \nu }(q,r,k)\) and \(\mathrm{{I}}\!\Gamma _\alpha (q,p_2,-p_1)\), shown in Fig. 5. Note that we opt for the version of the SDE obtained within the 3PI formalism [72, 114,115,116,117]; as a result, the vertices carrying the momentum q are fully dressed. The corresponding four-particle kernels \({{\mathcal {K}}}_{ij}\) are appropriately modified to avoid overcounting; as may be deduced from Fig. 6, for the purposes of this computation the “one-particle exchange” approximations of these kernels will be employed.
To obtain the relevant dynamical equations, we substitute for the vertices \(\mathrm{{I}}\!\Gamma _{\alpha \mu \nu }(q,r,k)\) and \(\mathrm{{I}}\!\Gamma _\alpha (q,p_2,-p_1)\) appearing on either side of the SDE system (red and orange circles) the expressions given in Eqs. (2.4) and (3.3), respectively. This introduces the pole parts on both sides of the system, and, after contraction of the first SDE (top row) by \({{\mathcal {T}}}_{\mu '\nu '}^{\mu \nu }(r,k)\), one may use the expressions given by Eqs. (2.5) and (3.4). Then, as the limit \(q \rightarrow 0\) is taken on both sides of the SDEs, the pole terms dominate over the regular parts, and, after triggering Eqs. (2.6) and (3.16), the displacement functions emerge as the leading contributions. Finally, the proper identification of the various tensorial structures on both sides, and subsequent matching of their co-factors, gives rise to a BS system that may be schematically represented as
where the four-entry quantity \({{\mathcal {A}}} = \big [{{\mathbb {C}}}, Q_3,{{\mathbb {Q}}}_{2+3},{{\mathbb {Q}}}_1\big ]\) was introduced, and the functions \({{\mathcal {M}}}_{mn}\) contain all remaining ingredients; their explicit form depends on the approximations employed for the kernels \(\mathcal{K}_{ij}\).
In what follows we approximate the kernels \({{\mathcal {K}}}_{ij}\) by their one-particle exchange form, shown in Fig. 6. In addition, we focus exclusively on the form factor \(\lambda _1\), associated with the tree-level tensor \(\gamma _{\alpha }\), and determine the displacement function \(Q_3\) appearing in the first relation of Eq. (3.19). Therefore, we restrict our analysis to the reduced system comprised by \({{\mathbb {C}}}(r^2)\) and \(Q_3(p^2)\) only, as shown in Fig. 6. We have confirmed that the omission of the functions \({{\mathbb {Q}}}_{2+3}(p^2)\) and \({{\mathbb {Q}}}_1(p^2)\) has practically no impact on \({{\mathbb {C}}}(r^2)\) and \(Q_3(p^2)\).
In order to proceed, we need to furnish inputs for the Landau-gauge propagators and transversely projected vertices appearing in the system of Fig. 6. For the gluon, ghost, and quark propagators, we use appropriate fits to results obtained from lattice QCD, as described in Appendix A. Furthermore, we assume that the transversely projected three-gluon and quark–gluon vertices,
respectively, can be approximated byFootnote 6
where and are the tree-level forms of and , and are obtained by transversely projecting the \(\Gamma _{\!0}^{\alpha \mu \nu }\) and \(\Gamma _{\!0}^\alpha \) of Eqs. (2.12) and (3.2), respectively. For the three-gluon vertex, Eq. (4.3) has been validated by numerous studies in pure Yang–Mills theory [26, 50, 118,119,120], and we assume it to hold as well for \(N_f = 2\). In the case of the quark–gluon vertex, the particular form in Eq. (4.3) has not been tested explicitly in the literature. However, previous works have already shown that the classical form factor of is the largest in magnitude [71, 72, 75,76,77,78,79, 88,89,90,91,92], and that its angular dependence is rather weak [77, 81, 82, 93]; together, these observations motivate the use of Eq. (4.3) for .
In order to unify the description of the results, we rename \(r^2 \rightarrow p^2\). Next, we pass to Euclidean momenta, i.e., \(p^2 \rightarrow -p^2_{{\scriptscriptstyle E}}\), with \(p^2_{{\scriptscriptstyle E}} >0\), introduce the integral measure in hyperspherical coordinates
and employ standard transformation properties for all Green’s functions and form factors involved (see, e.g., Eqs. (5.13) to (5.16) of [78]); note, in particular, that \({{\mathbb {C}}}^{{\scriptscriptstyle E}}(p^2_{{\scriptscriptstyle E}}) = - {{\mathbb {C}}}(-p^2_{{\scriptscriptstyle E}})\) [11] and \(Q^{{\scriptscriptstyle E}}_3(p^2_{{\scriptscriptstyle E}}) = Q_3(-p^2_{{\scriptscriptstyle E}})\).
Defining
where the index “E” has been suppressed throughout, we arrive at the following system of coupled BS equations
The functions \(f_{ij}(x,y,\theta )\) are given by
where \(s^2 = x + y + \sqrt{xy}c_\theta \), \({{\bar{s}}}^2 = x + y - \sqrt{xy}c_\theta \), and the subscripts y or z in the functions A and B indicate their momentum dependence i.e., \(A_z:=A(z)\), etc.
4.2 Inputs
In order to proceed with the solution of the system given by Eq. (4.6), we need to specify the form of the various components entering in the functions \(f_{ij}(x,y,\theta )\), and in particular A, B, \(\Delta \), \( L _{{sg}}\), and \(\lambda _1\). In addition, the ghost dressing function F is needed for implementing the required conversions between renormalization schemes, as explained below.
Note in particular the following important points:
-
(i)
Throughout this work, we will use as external inputs a series of fits given in Appendix A to the \(N_f = 2\) lattice data for the gluon and ghost propagators from [98, 99], and for \(A(p^2)\), \(B(p^2)\) and \(\lambda _1(p^2)\) from [92, 112]. Specifically, for the quark functions, we employ the setups denominated “L08” and “L07” in Table I of [92], which have large statistics and small current quark mass, \(m_q\), and pion mass, \(m_\pi \), namely \((m_q,m_\pi ) = (6.2,280)\) MeV and (8, 295) MeV, respectively.
-
(ii)
The lattice data of [92, 112] for the functions \(A(p^2)\) and \(\lambda _1(p^2)\) display visible artifacts in the ultraviolet, where the known perturbative behavior of these functions is not accurately reproduced. This issue, which has been discussed in various studies [89,90,91,92,93,94, 112, 121], is ameliorated by the use of the so-called “tree-level correction” [92, 112, 121], but even then is not completely cured. In fact, signs of these artifacts are already present at \(p = 3\) GeV, where the L07 \(\lambda _1(p^2)\) starts to increase [see bottom left panel of Fig. 10], rather than continuing decreasing as predicted by perturbation theory [56, 122, 123]. For this reason, we discard the data for these functions for momenta above 2.5 GeV. Since we employ fitting functions that reproduce the one-loop resumed perturbative result for each of the functions at large momenta (see Appendix A), the ultraviolet behavior of our inputs is under control.
-
(iii)
We next turn to the \( L _{{sg}}(p^2)\). Unfortunately, the only available unquenched lattice results for \( L _{{sg}}(r^2)\) are not for \(N_f = 2\) but rather for \(N_f = 2+1\) (two light quarks with current mass 1.3 MeV, and a heavier one, with current mass 63 MeV) [51]. However, at least in the case of the gluon propagator [51, 98], the difference between \(N_f = 2\) to \(N_f = 2+1\) is rather mild. It is therefore reasonable to use for the \( L _{{sg}}(p^2)\) in the present analysis the \(N_f = 2+1\) data from [51]. We hasten to emphasize that this last approximation only affects the pole amplitudes determined through the BS equations, whereas the determination of \(Q_3(p^2)\), carried out in the next section through the analysis of the WI displacement, does not depend on \( L _{{sg}}(p^2)\).
-
(iv)
In general, the aforementioned lattice data are renormalized in different schemes; therefore, their self-consistent use hinges on their careful conversion into a common renormalization scheme. To that end, we adopt a particular variation of momentum subtraction (MOM) scheme, the so-called \(\widetilde{\text {MOM}}\) scheme [88], defined by the prescription
$$\begin{aligned}{} & {} \Delta ^{-1}(\mu ^2) = \mu ^2, \quad F(\mu ^2) = 1 , \quad A(\mu ^2) = 1 , \nonumber \\ {}{} & {} \lambda _1(\mu ^2) = 1 , \end{aligned}$$(4.8)where we take \(\mu = 2\) GeV. The procedure employed for consistently adjusting the results between renormalization schemes is described in detail in Appendix B.
4.3 Results
With all external ingredients consistently renormalized in the \(\widetilde{\text {MOM}}\) scheme, we are in position to solve the BS equations of Eq. (4.6) numerically, converting it to an eigenvalue problem. The procedure employed differs from the typical treatments of BS equations for massive bound states, where the value of the coupling is fixed and the mass of the state is varied. Specifically, since in the case of the Schwinger poles we fix the mass of the bound state to be zero, we turn Eq. (4.6) into an eigenvalue problem by treating \(\alpha _s\) as a free variable. Then, Eq. (4.6) can be rewritten as
with \(\lambda := 1/\alpha _s\).
Next, Eq. (4.9) can be discretized and solved numerically for the eigenvalue \(\lambda \), and the corresponding eigenfunctions, \({{\mathbb {C}}}(x)\) and \(Q_3(x)\). With the ingredients entering the \(f_{ij}\) [see Eq. (4.7)] fixed from the lattice, as discussed in Sect. 4.2, the solutions of Eq. (4.9) form a discrete spectrum, \(\{ \lambda _n, {{\mathbb {C}}}_n, Q_{3\,n} \}\); evidently, only solutions with \(\lambda _n > 0\) are physically acceptable, since they correspond to a positive \(\alpha _s\). Out of all \(\lambda _n > 0\) we choose the largest one, which corresponds to the solution of Eq. (4.6) with the smallest possible value of \(\alpha _s\).
Before presenting the solutions of the BS system given by Eq. (4.9), we need to clarify two important points.
First, as happened in the quenched case [11], the value of \(\alpha _s\) obtained from the above procedure ( i.e., the inverse of the largest eigenvalue of Eq. (4.9) that yields a nontrivial solution) exceeds the \(\widetilde{\text {MOM}}\) value for the particular renormalization point chosen, \(\mu = 2\) GeV; specifically, we have that \(\alpha ^{\textrm{MOM}}_s = 0.47\) [see Eq. (B11)], while the eigenvalue of the BS equation yields \(\alpha ^{\textrm{BS}}_s = 1.17\) . This discrepancy originates clearly from implementing the one-particle exchange approximations to the kernels \({{\mathcal {K}}}_{ij}\) of Fig. 5: the approximated kernels miss a certain amount of strength, which is effectively compensated by increasing the value of the coupling. We emphasize that the eigenvalue is known to depend strongly on the details of the truncation used, but affects only slightly the form of the solutions obtained [11].
Second, since the system of BS equations in Eq. (4.6) is linear and homogeneous, its overall scale is undetermined: the multiplication of a given solution by an arbitrary constant yields another solution.
We stress that the above considerations are relevant for the solution of the BS system, but do not affect the results presented in Sect. 5, obtained through the WI displacement. In particular, the correct \(\widetilde{\text {MOM}}\) value of \(\alpha _s\) is used in Eq. (5.3) for the calculation of the \(K_i(p^2)\).
In Fig. 7 we show the resulting \({{\mathbb {C}}}(p^2)\) (left) and \(Q_3(p^2)\) (right) as blue and black curves, respectively. This particular solution has its scale set by fitting an arbitrary solution of the BS equations to the result of the WI displacement, to be described in the next section. The bands around the curves result from the standard error in determining this scale.
As we can see in Fig. 7, for \(p<1\) GeV the \({{\mathbb {C}}}(p^2)\) and \(Q_3(p^2)\) have similar magnitudes, (but opposite signs), suggesting that both amplitudes might have similar weights in the BS dynamics. However, the terms containing \({{\mathbb {C}}}(p^2)\) in Eq. (4.6) have much larger prefactors. Moreover, we can see from Fig. 7 that \({{\mathbb {C}}}(p^2)\) has support over a much longer interval of momenta than \(Q_3(p^2)\), which decreases rapidly for \(p>1\) GeV. As a result, \({{\mathbb {C}}}(p^2)\) dominates the dynamics of the BS system. In fact, the present solution for \({{\mathbb {C}}}(p^2)\) is rather similar to quenched results obtained previously [7, 11, 36], shown as the purple dot-dashed curve in the left panel of Fig. 7. Finally, we point out that if \({{\mathbb {C}}}(p^2)\) is set to zero in Eq. (4.6), the resulting BS equation for \(Q_3(p^2)\) has no solutions for \(\alpha _s > 0\).
The solutions obtained from the BS system indicate that the mass generating mechanism known from the pure Yang–Mills case is only mildly affected by the inclusion of two active quark flavors. To appreciate this point in some detail, we turn to the gluon mass equation that emerges from the treatment of the two diagrams shown in Fig. 1; the additional gluonic corrections stemming from the two-loop diagrams will be neglected for the purposes of this qualitative analysis
The procedure outlined in [13, 14] for obtaining the contribution to the gluon mass from diagram \(d_1\) by appealing to Eq. (2.6) can be straightforwardly extended to the case of diagram \(d_2\), where Eq. (3.16) must be employed. Keeping only the dominant term \(Q_3(p^2)\), one obtains (Euclidean space)
where the renormalization constants \(Z_2\) and \(Z_3\) are defined in Eq. (B1), and the kernels are given by
Note that the dependence of \({{\mathcal {K}}}_{{\mathbb {C}}}^{N_f}(y)\) on \(N_f\) is only implicit, due to the \(N_f\) dependence of \(\Delta (p^2)\), \({{\mathbb {C}}}(p^2)\) and \(\alpha _s\). Instead, \({{\mathcal {K}}}_{Q_3}^{N_f}(y)\) depends explicitly on \(N_f\), as well as implicitly.
As is known from lattice simulation [98, 99], the saturation point of the gluon propagator with two active quarks is lower with respect to the quenched case, as may be seen on the left panel of Eq. (8); this is tantamount to saying that the gluon mass increases when quarks are introduced. The kernels given in Eq. (4.11) seem to capture this tendency: the inclusion of the quarks leads to kernels with additional support throughout the relevant region of integration.
The origin of this relative enhancement is twofold. First, as shown on the right panel of Fig. 8, \(\mathcal{K}_{{\mathbb {C}}}^{N_f=2}(y)\) (orange continuous) increases slightly with respect to \({{\mathcal {K}}}_{{\mathbb {C}}}^{N_f=0}(y)\) (blue dot-dashed) (11% at the corresponding peaks). This increase is the net outcome of two opposing tendencies: The unquenched gluon propagators suppress \({{\mathcal {K}}}_{{\mathbb {C}}}^{N_f=2}(y)\) with respect to \(\mathcal{K}_{{\mathbb {C}}}^{N_f=0}(y)\), while the unquenched coupling enhances it [98]. Second, the kernel \({{\mathcal {K}}}_{Q_3}^{N_f}(y)\) (purple dotted), which is absent when \(N_f =0\), provides an additional small positive contribution, as shown on the right panel of Fig. 8. The overall effect may be roughly appreciated if we set \(Z_3=Z_2=1\) in Eq. (4.10) and then add the two kernels (red continuous); the end result, compared to the quenched case (blue dot-dashed), is shown as an inset on the right panel of Fig. 8.
This additional support of the unquenched kernel represents a relatively small increment with respect to the quenched kernel; therefore it is reasonable to expect a moderate increase in the gluon mass, compatible with the lattice findings of [98, 99]. The detailed calculation of the effect requires proper renormalization and the inclusion in Eq. (4.10) of two-loop dressed loops, not shown here; however, this task lies beyond the scope of the present work.
5 Displacement function from lattice data
In this section we will test the first relation in Eq. (3.19), which expresses the displacement associated with the classical form factor as
To that end, we use the first relation in Eq. (3.13) to compute the WI prediction, \(\lambda _1^{\star }(p^2)\), and then subtract from it the lattice data of [92] for \(\lambda _1(p^2)\).
The evaluation of the WI prediction is rather subtle, mainly due to the presence of the factor \(Z_H\), the renormalization constant of the quark-ghost kernel. \(Z_H\) is finite in the Landau gauge; in fact, there exists a renormalization scheme, namely the Taylor scheme [see Eq. (B4)], where \(Z_H = 1\). However, this scheme is not the same as the \(\widetilde{\text {MOM}}\) employed on the lattice determination of the Green’s functions appearing in Eq. (3.13). Therefore, in Appendix B we determine the appropriate values for the \(\widetilde{\text {MOM}}\) scheme with \(\mu = 2\) GeV to be \(Z_H = 1.120(8)\) and \(Z_H = 1.121(9)\), for the L08 and L07 lattice setups, respectively.
In order to determine the form factors \(K_1(p^2)\) and \(K_4(p^2)\), we evaluate the one-loop dressed diagram shown in Fig. 4, and use Eq. (3.9). The full ghost-gluon vertex appearing in this diagram has the general form
where r, k, and q stand for the momenta of the antighost, ghost, and gluon, respectively; at tree-level, \(B_1^0 = 1\) and \(B_2^0 = 0\).
Then, it is relatively straightforward to obtain the results
where \(B_1(y,0,y)\) corresponds to the so-called “soft-ghost limit” of the form factor \(B_1\).
The numerical evaluation of the above expressions proceeds through the substitution of A, B, \(\Delta \), \( L _{{sg}}\), and \(\lambda _1\) by fits to the lattice data, exactly as described in Sect. 4. For \(\alpha _s\), we use the \(\widetilde{\text {MOM}}\) values determined in Eq. (B11). Regarding \(B_1(y,0,y)\), since no lattice data are available for this quantity for \(N_f =2\), we determine it from the SDE that it satisfies [see Appendix C].
The dimensionless combinations \(p^2 K_4(p^2) A(p^2)\) and \(-K_1(p^2)B(p^2)\) appearing in Eq. (3.13) are shown in Fig. 9 as blue continuous and red dashed lines, respectively. The two panels correspond to the results obtained when the inputs used for \(\lambda _1\) in Eq. (5.3) originate from the lattice setup L08 (left) or L07 (right). The comparison of the two panels reveals that \(p^2 K_4(p^2)A(p^2)\) is nearly identical for both lattices, whereas the value of \(-K_1(p^2)B(p^2)\) at the origin is slightly larger in magnitude when the \(\lambda _1\) from the L07 setup is used.
Evidently, the errors associated with the inputs used to evaluate Eq. (5.3) get propagated to the resulting \(K_i(p^2)\). It turns out that the largest source of uncertainty is the form factor \(\lambda _1\). In order to estimate the error that \(\lambda _1\) introduces to the \(K_i(p^2)\), we repeat the numerical evaluation of Eq. (5.3) with
where \(\delta \lambda _1(p^2)\) is the \(1\sigma \) spread in \(\lambda _1(p^2)\), shown as green bands in the left panels of Fig. 10, for each of the lattice setups. Then, the error obtained is combined in quadrature with all other intrinsic errors stemming from the remaining ingredients, mainly \(A(p^2)\) and \(B(p^2)\), to furnish our estimate for the total error of the quantities \(p^2 K_4(p^2)A(p^2)\) and \(-K_1(p^2)B(p^2)\).
With the \(K_i(p^2)\) in hand, we use the first line of Eq. (3.13) to compute \(\lambda _1^\star (p^2)\). The result is shown as a green dot-dashed line for each of the lattice setups, L08 and L07, on the top left and bottom left panels of Fig. 10, respectively. The green bands around these curves are our error estimates, which combine in quadrature the errors in all of the ingredients appearing in Eq. (3.13). In particular, we included in the total error budget a \(5\%\) error estimate in the value of \(F(0) = 2.39\) obtained by extrapolating the lattice data of [98, 99] to the origin, \(p=0\).
As is clear from the left panels of Fig. 10, our results for \(\lambda _1^\star (p^2)\) are considerably larger than the input \(\lambda _1(p^2)\), indicating the existence of a nontrivial displacement, \(Q_3(p^2)\). On the right panels of Fig. 10 we show as points the results for \(Q_3(p^2)\) obtained from Eq. (3.19), for the L08 and L07 setups on the top and bottom, respectively. The error bars in the points for \(Q_3(p^2)\) result from combining in quadrature the standard error of the lattice \(\lambda _1(p^2)\) and the estimated error in \(\lambda _1^\star (p^2)\).
We next evaluate the statistical significance of the signal obtained for \(Q_3(p^2)\), in comparison to the “null hypothesis”, namely the case when \(Q_3 \rightarrow Q_3^0 = 0\), due to the the absence of the Schwinger mechanism. To that end, we compute separately for each of the lattice setups the \(\chi ^2\) deviation from the null hypothesis as
where the sum over the lattice points i, corresponding to momenta \(p_i\), extends until \(p_i < 2.5\) GeV; the reason for implementing this cut is explained in item (ii) of Sect. 4.2. The number of lattice points in this interval is \(n_p =18\) for the setup L08 and \(n_p =16\) for the setup L07. The quantity \(\epsilon _{Q_3(p_i^2)}\) represents the error in the corresponding value of \(Q_3(p_i^2)\). Then, the use of Eq. (5.5) yields \(\chi ^2= 119\) for the setup L08, and \(\chi ^2= 76\) for the setup L07.
At this point, we compute the probability, \(P_{Q_3^0}\), that our result for \(Q_3\) is consistent with the null hypothesis through
where \(\chi ^2_{\mathrm{{\scriptscriptstyle PDF}}}\) is the \(\chi ^2\) probability distribution function. Then, using the above quoted values of \(n_p\) and \(\chi ^2\) we obtain \(P_{Q_3^0} = 6.48\times 10^{-17}\) for L08, and \(P_{Q_3^0} = 8.68\times 10^{-10}\) for L07. In terms of confidence levels to discard the null hypothesis, these probabilities translate to \(8.4\sigma \) and \(6.1\sigma \), respectively.
6 Discussion and conclusions
The non-Abelian implementation of the SM is associated with the appearance of longitudinally coupled massless poles in the fundamental vertices of the theory. In addition to endowing the gluons with an effective mass, the action of the SM leads to the displacement of the Ward identities satisfied by the fundamental vertices of the theory by amounts proportional to the momentum-dependent residues of these poles. This property is particularly crucial, because it enables us to confirm the nonvanishing nature of the pole residues by forming the difference between the lattice data and the WI prediction for certain vertex form factors in the soft-gluon limit. In the present work we have focused on the manifestation of this characteristic effect at the level of the quark–gluon vertex of QCD with two light quark flavors, \(N_f=2\).
Our analysis demonstrates that the quark–gluon vertex contains massless poles: they correspond to the propagators of scalar, color-carrying bound states, which are composed out of two gluons or of a quark–antiquark pair. The residue functions associated with these poles play the role of the BS amplitudes for the bound-state formation, and are determined from a coupled system of BS equations. Crucially, this system involves also the unquenched version of the function \({{\mathbb {C}}}(p^2)\), known from the well-studied case of the (quenched) three-gluon vertex.
The residue function \(Q_3(p^2)\), associated with the tree-level Dirac structure \(\gamma _{\alpha }\), plays a prominent role in this study, because it is directly responsible for the displacement produced between the lattice data and the WI prediction for the classical form factor of the quark–gluon vertex. In fact, the detailed comparison with the lattice data of [92] reveals a statistically significant discrepancy (signal), whose momentum-dependence is completely consistent with the BS solution for \(Q_3(p^2)\), as may be seen in Fig. 10. This finding further corroborates the action of the SM in the context of unquenched QCD, providing additional evidence for the robustness of this particular mass generating scenario.
The robustness of the result shown in Fig. 10 hinges on one’s ability to accurately determine the WI prediction for the form factor \(\lambda _1(p^2)\), namely the \(\lambda _i^{\star }(p^2)\) given by Eq. (3.13). There, in addition to the components \(A(p^2)\) and \(B(p^2)\) of the quark propagator, the form factors \(K_1(p^2)\) and \(K_4(p^2)\), associated with the quark-ghost kernel [see Eq. (3.9) and Fig. 4], play a central role. The determination of \(K_1(p^2)\) and \(K_4(p^2)\) involves the fully-dressed quark–gluon vertex, which has been approximated by the Ansatz given in the second line of Eq. (4.3). This particular form is inspired by the special property of “planar degeneracy”, satisfied at a high level of accuracy by the three-gluon vertex [26, 50, 118,119,120]. In the case of the quark–gluon vertex, the veracity of this Ansatz has not been confirmed at a corresponding level of accuracy, even though it seems fairly plausible, given the observations made below Eq. (4.3). To be sure, a more detailed analysis of this entire issue is required, in order to determine the limitations of this approximation, and the possible modifications that may arise in the form factors \(K_1(p^2)\) and \(K_4(p^2)\). We hope to embark on such a study in the near future.
Finally, even though we have focused on the displacement produced to \(\lambda _1(p^2)\) by \(Q_3(p^2)\), the form factors \(\lambda _2(p^2)\) and \(\lambda _3(p^2)\) get also displaced by the functions \({{\mathbb {Q}}}_{2+3}(p^2)\) and \({{\mathbb {Q}}}_1(p^2)\), respectively [viz. second and third relation in Eq. (3.19)]. In fact, a preliminary analysis indicates that in the case of \(\lambda _3(p^2)\) a detectable displacement may be obtained. This happens despite the fact that \({{\mathbb {Q}}}_1(p^2)\) is significantly smaller compared to \({{\mathbb {C}}}(r^2)\) and \(Q_3(p^2)\), because \(\lambda _3(p^2)\) is significantly smaller to \(\lambda _1(p^2)\), and the available lattice data display rather small error bars. It is clearly important to explore this possibility further, establishing the statistical significance of the resulting displacement and its similarity to the BS prediction.
Data availability
This manuscript has no associated data or the data will not be deposited. [Authors’ comment: The datasets generated during and/or analysed during the current study are available from the corresponding author on reasonable request.]
Notes
The WI is the limit of a Slavnov-Taylor identity (STI) [45, 46] when the momentum of the incoming gluon is taken to vanish. For example, the Abelian STI \(q^\alpha \Gamma _\alpha (q,p,-p-q) = S^{-1}(p+q) - S^{-1}(p)\), known from QED, gives rise to the textbook WI \(\Gamma _\alpha (0,p,-p) = \partial S^{-1}(p)/\partial p^\alpha \).
We work in Minkowski space, passing key results to Euclidean space for the purposes of numerical evaluation or comparison with the lattice.
The \(K_i\) of [78] can be obtained from the present ones by the redefinitions \(K_1 \rightarrow K_1\), \(K_2\rightarrow K_2/4\), \(K_3\rightarrow K_3/2\) and \(K_4\rightarrow K_2/2\).
In the definition of \(s^2\) in Eq. (4.3) we introduce the factor 1/2 instead of the 1/6 originally used in [118]. This choice guarantees that, in the soft-gluon limit, \(q = 0\) \((p = - r)\), the form factor \( L _{{sg}}(r^2)\) corresponds to the same function measured on the lattice [cf. Eq. (2.11)].
It is possible to define a ghost-gluon effective coupling with a nontrivial dependence on the ghost-gluon vertex dressing, e.g., \({{\overline{\alpha }}}_{{\scriptscriptstyle cg}}(p^2) = \alpha _s^{\mathrm{{\scriptscriptstyle B}}} p^2 \Delta _{\mathrm{{\scriptscriptstyle B}}}(p^2) F^2_{\mathrm{{\scriptscriptstyle B}}}(p^2) B_1^{\mathrm{{\scriptscriptstyle B}}}(p^2,0,p^2)\); the connection with \(\alpha _{{\scriptscriptstyle cg}}(p^2)\) is implemented through the substitution \(B_1^{\mathrm{{\scriptscriptstyle B}}}(p^2,0,p^2) \rightarrow \) \(B_1^{\mathrm{{\scriptscriptstyle B}}}(p^2,0,p^2) - B_2^{\mathrm{{\scriptscriptstyle B}}}(p^2,0,p^2) = 1\).
References
W.J. Marciano, H. Pagels, Phys. Rep. 36, 137 (1978). https://doi.org/10.1016/0370-1573(78)90208-9
J.S. Schwinger, Phys. Rev. 125, 397 (1962). https://doi.org/10.1103/PhysRev.125.397
J.S. Schwinger, Phys. Rev. 128, 2425 (1962). https://doi.org/10.1103/PhysRev.128.2425
J. Smit, Phys. Rev. D 10, 2473 (1974). https://doi.org/10.1103/PhysRevD.10.2473
E. Eichten, F. Feinberg, Phys. Rev. D 10, 3254 (1974). https://doi.org/10.1103/PhysRevD.10.3254
J.M. Cornwall, Phys. Rev. D 26, 1453 (1982). https://doi.org/10.1103/PhysRevD.26.1453
A.C. Aguilar, D. Ibanez, V. Mathieu, J. Papavassiliou, Phys. Rev. D 85, 014018 (2012). https://doi.org/10.1103/PhysRevD.85.014018
D. Binosi, D. Ibañez, J. Papavassiliou, Phys. Rev. D 86, 085033 (2012). https://doi.org/10.1103/PhysRevD.86.085033
A.C. Aguilar, D. Binosi, C.T. Figueiredo, J. Papavassiliou, Phys. Rev. D 94, 045002 (2016). https://doi.org/10.1103/PhysRevD.94.045002
G. Eichmann, J.M. Pawlowski, J.M. Silva, Phys. Rev. D 104, 114016 (2021). https://doi.org/10.1103/PhysRevD.104.114016
A.C. Aguilar, M.N. Ferreira, J. Papavassiliou, Phys. Rev. D 105, 014030 (2022). https://doi.org/10.1103/PhysRevD.105.014030
A.C. Aguilar, F. De Soto, M.N. Ferreira, J. Papavassiliou, F. Pinto-Gómez, C.D. Roberts, J. Rodríguez-Quintero, Phys. Lett. B 841, 137906 (2023). https://doi.org/10.1016/j.physletb.2023.137906
J. Papavassiliou, Chin. Phys. C 46, 112001 (2022). https://doi.org/10.1088/1674-1137/ac84ca
M.N. Ferreira, J. Papavassiliou, Particles 6, 312 (2023). https://doi.org/10.3390/particles6010017
C.S. Fischer, A. Maas, J.M. Pawlowski, Ann. Phys. 324, 2408 (2009). https://doi.org/10.1016/j.aop.2009.07.009
K.G. Wilson, T.S. Walhout, A. Harindranath, W.-M. Zhang, R.J. Perry, S.D. Glazek, Phys. Rev. D 49, 6720 (1994). https://doi.org/10.1103/PhysRevD.49.6720
K.-I. Kondo, Phys. Lett. B 514, 335 (2001). https://doi.org/10.1016/S0370-2693(01)00817-6
D. Epple, H. Reinhardt, W. Schleifenbaum, A.P. Szczepaniak, Phys. Rev. D 77, 085007 (2008). https://doi.org/10.1103/PhysRevD.77.085007
D.R. Campagnari, H. Reinhardt, Phys. Rev. D 82, 105021 (2010). https://doi.org/10.1103/PhysRevD.82.105021
M. Tissier, N. Wschebor, Phys. Rev. D 82, 101701 (2010). https://doi.org/10.1103/PhysRevD.82.101701
N. Alkofer, R. Alkofer, Phys. Lett. B 702, 158 (2011). https://doi.org/10.1016/j.physletb.2011.06.073
J. Serreau, M. Tissier, Phys. Lett. B 712, 97 (2012). https://doi.org/10.1016/j.physletb.2012.04.041
F. Siringo, Nucl. Phys. B 907, 572 (2016). https://doi.org/10.1016/j.nuclphysb.2016.04.028
A.K. Cyrol, L. Fister, M. Mitter, J.M. Pawlowski, N. Strodthoff, Phys. Rev. D 94, 054005 (2016). https://doi.org/10.1103/PhysRevD.94.054005
S.D. Glazek, M. Gómez-Rocha, J. More, K. Serafin, Phys. Lett. B 773, 172 (2017). https://doi.org/10.1016/j.physletb.2017.08.018
M.Q. Huber, Phys. Rev. D 101, 114009 (2020). https://doi.org/10.1103/PhysRevD.101.114009
J. Horak, F. Ihssen, J. Papavassiliou, J.M. Pawlowski, A. Weber, C. Wetterich, SciPost Phys. 13, 042 (2022). https://doi.org/10.21468/SciPostPhys.13.2.042
B. Zumino, Acta Phys. Austriaca Suppl. 2, 212 (1965). https://doi.org/10.1007/978-3-7091-7649-8_12
R. Jackiw, K. Johnson, Phys. Rev. D 8, 2386 (1973). https://doi.org/10.1103/PhysRevD.8.2386
R. Jackiw, In *Erice 1973, Proceedings, Laws Of Hadronic Matter*, New York 1975, 225–251 and M I T Cambridge - COO-3069-190 (73,REC.AUG 74) (1973)
J. Cornwall, R. Norton, Phys. Rev. D 8, 3338 (1973). https://doi.org/10.1103/PhysRevD.8.3338
E.C. Poggio, E. Tomboulis, S.H.H. Tye, Phys. Rev. D 11, 2839 (1975). https://doi.org/10.1103/PhysRevD.11.2839
J.M. Cornwall, Nucl. Phys. B 157, 392 (1979). https://doi.org/10.1016/0550-3213(79)90111-1
A.C. Aguilar, D. Binosi, J. Papavassiliou, Phys. Rev. D 78, 025010 (2008). https://doi.org/10.1103/PhysRevD.78.025010
D. Binosi, J. Papavassiliou, Phys. Rev. D 97, 054029 (2018). https://doi.org/10.1103/PhysRevD.97.054029
A.C. Aguilar, D. Binosi, C.T. Figueiredo, J. Papavassiliou, Eur. Phys. J. C 78, 181 (2018). https://doi.org/10.1140/epjc/s10052-018-5679-2
C.D. Roberts, A.G. Williams, Prog. Part. Nucl. Phys. 33, 477 (1994). https://doi.org/10.1016/0146-6410(94)90049-3
I.C. Cloet, C.D. Roberts, Prog. Part. Nucl. Phys. 77, 1 (2014). https://doi.org/10.1016/j.ppnp.2014.02.001
R. Alkofer, L. von Smekal, Phys. Rep. 353, 281 (2001). https://doi.org/10.1016/S0370-1573(01)00010-2
C.S. Fischer, J. Phys. G 32, R253 (2006). https://doi.org/10.1088/0954-3899/32/8/R02
C.D. Roberts, Prog. Part. Nucl. Phys. 61, 50 (2008). https://doi.org/10.1016/j.ppnp.2007.12.034
D. Binosi, J. Papavassiliou, Phys. Rep. 479, 1 (2009). https://doi.org/10.1016/j.physrep.2009.05.001
A.C. Aguilar, D. Binosi, J. Papavassiliou, Front. Phys. (Beijing) 11, 111203 (2016). https://doi.org/10.1007/s11467-015-0517-6
M.Q. Huber, Phys. Rep. 879, 1 (2020). https://doi.org/10.1016/j.physrep.2020.04.004
J. Taylor, Nucl. Phys. B 33, 436 (1971). https://doi.org/10.1016/0550-3213(71)90297-5
A. Slavnov, Theor. Math. Phys. 10, 99 (1972). https://doi.org/10.1007/BF01090719
A. Athenodorou, D. Binosi, P. Boucaud, F. De Soto, J. Papavassiliou, J. Rodriguez-Quintero, S. Zafeiropoulos, Phys. Lett. B 761, 444 (2016). https://doi.org/10.1016/j.physletb.2016.08.065
A.G. Duarte, O. Oliveira, P.J. Silva, Phys. Rev. D 94, 074502 (2016). https://doi.org/10.1103/PhysRevD.94.074502
P. Boucaud, F. De Soto, J. Rodríguez-Quintero, S. Zafeiropoulos, Phys. Rev. D 95, 114503 (2017). https://doi.org/10.1103/PhysRevD.95.114503
F. Pinto-Gómez, F. De Soto, M.N. Ferreira, J. Papavassiliou, J. Rodríguez-Quintero, Phys. Lett. B 838, 137737 (2023). https://doi.org/10.1016/j.physletb.2023.137737
A.C. Aguilar, F. De Soto, M.N. Ferreira, J. Papavassiliou, J. Rodríguez-Quintero, S. Zafeiropoulos, Eur. Phys. J. C 80, 154 (2020). https://doi.org/10.1140/epjc/s10052-020-7741-0
A.C. Aguilar, F. De Soto, M.N. Ferreira, J. Papavassiliou, J. Rodríguez-Quintero, Phys. Lett. B 818, 136352 (2021). https://doi.org/10.1016/j.physletb.2021.136352
A.C. Aguilar, C.O. Ambrósio, F. De Soto, M.N. Ferreira, B.M. Oliveira, J. Papavassiliou, J. Rodríguez-Quintero, Phys. Rev. D 104, 054028 (2021). https://doi.org/10.1103/PhysRevD.104.054028
J.S. Ball, T.-W. Chiu, Phys. Rev. D 22, 2542 (1980). https://doi.org/10.1103/PhysRevD.22.2542
A. Kizilersu, M. Reenders, M. Pennington, Phys. Rev. D 52, 1242 (1995). https://doi.org/10.1103/PhysRevD.52.1242
A.I. Davydychev, P. Osland, L. Saks, Phys. Rev. D 63, 014022 (2001). https://doi.org/10.1103/PhysRevD.63.014022
J. Gracey, Phys. Rev. D 90, 025014 (2014). https://doi.org/10.1103/PhysRevD.90.025014
J.A. Gracey, Phys. Rev. D 84, 085011 (2011). https://doi.org/10.1103/PhysRevD.84.085011
R. Bermudez, L. Albino, L.X. Gutiérrez-Guerrero, M.E. Tejeda-Yeomans, A. Bashir, Phys. Rev. D 95, 034041 (2017). https://doi.org/10.1103/PhysRevD.95.034041
A. Bender, C.D. Roberts, L. Von Smekal, Phys. Lett. B 380, 7 (1996). https://doi.org/10.1016/0370-2693(96)00372-3
M. Bhagwat, P. Tandy, Phys. Rev. D 70, 094039 (2004). https://doi.org/10.1103/PhysRevD.70.094039
F.J. Llanes-Estrada, C.S. Fischer, R. Alkofer, Nucl. Phys. Proc. Suppl. 152, 43 (2006). https://doi.org/10.1016/j.nuclphysbps.2005.08.008
A. Holl, A. Krassnigg, C.D. Roberts, Nucl. Phys. Proc. Suppl. 141, 47 (2005). https://doi.org/10.1016/j.nuclphysbps.2004.12.009
H.H. Matevosyan, A.W. Thomas, P.C. Tandy, Phys. Rev. C 75, 045201 (2007). https://doi.org/10.1103/PhysRevC.75.045201
A.C. Aguilar, J. Papavassiliou, Phys. Rev. D 83, 014013 (2011). https://doi.org/10.1103/PhysRevD.83.014013
S.-X. Qin, L. Chang, Y.-X. Liu, C.D. Roberts, S.M. Schmidt, Phys. Lett. B 722, 384 (2013). https://doi.org/10.1016/j.physletb.2013.04.034
D. Binosi, L. Chang, J. Papavassiliou, S.-X. Qin, C.D. Roberts, Phys. Rev. D 95, 031501 (2017). https://doi.org/10.1103/PhysRevD.95.031501
M. Hopfer, A. Windisch, R. Alkofer, PoS ConfinementX, 073 (2012). https://doi.org/10.22323/1.171.0073
A.C. Aguilar, D. Binosi, J.C. Cardona, J. Papavassiliou, PoS ConfinementX, 103 (2012). https://doi.org/10.22323/1.171.0103
E. Rojas, J. de Melo, B. El-Bennich, O. Oliveira, T. Frederico, J. High Energy Phys. 10, 193 (2013). https://doi.org/10.1007/JHEP10(2013)193
R. Williams, Eur. Phys. J. A 51, 57 (2015). https://doi.org/10.1140/epja/i2015-15057-4
R. Williams, C.S. Fischer, W. Heupel, Phys. Rev. D 93, 034026 (2016). https://doi.org/10.1103/PhysRevD.93.034026
H. Sanchis-Alepuz, R. Williams, Phys. Lett. B 749, 592 (2015). https://doi.org/10.1016/j.physletb.2015.08.067
M. Peláez, M. Tissier, N. Wschebor, Phys. Rev. D 92, 045012 (2015). https://doi.org/10.1103/PhysRevD.92.045012
R. Alkofer, C.S. Fischer, F.J. Llanes-Estrada, K. Schwenzer, Ann. Phys. 324, 106 (2009). https://doi.org/10.1016/j.aop.2008.07.001
M. Mitter, J.M. Pawlowski, N. Strodthoff, Phys. Rev. D 91, 054035 (2015). https://doi.org/10.1103/PhysRevD.91.054035
A.K. Cyrol, M. Mitter, J.M. Pawlowski, N. Strodthoff, Phys. Rev. D 97, 054006 (2018). https://doi.org/10.1103/PhysRevD.97.054006
A.C. Aguilar, D. Binosi, D. Ibañez, J. Papavassiliou, Phys. Rev. D 90, 065027 (2014). https://doi.org/10.1103/PhysRevD.90.065027
F. Gao, J. Papavassiliou, J.M. Pawlowski, Phys. Rev. D 103, 094013 (2021). https://doi.org/10.1103/PhysRevD.103.094013
A.C. Aguilar, J.C. Cardona, M.N. Ferreira, J. Papavassiliou, Phys. Rev. D 96, 014029 (2017). https://doi.org/10.1103/PhysRevD.96.014029
A.L. Blum, R. Alkofer, M.Q. Huber, A. Windisch, Acta Phys. Pol. Suppl. 8, 321 (2015). https://doi.org/10.5506/APhysPolBSupp.8.321
A.L. Blum, Three-gluon vertex and quark-gluon vertex functions in the Landau gauge, Ph.D. thesis, school Graz U. (2017) inspirehep.net/files/8819b2a2c94d412a8367ce363c2b7b47
O. Oliveira, W. de Paula, T. Frederico, J.P.B.C. de Melo, Eur. Phys. J. C 79, 116 (2019). https://doi.org/10.1140/epjc/s10052-019-6617-7
L. Albino, A. Bashir, L.X.G. Guerrero, B.E. Bennich, E. Rojas, Phys. Rev. D 100, 054028 (2019). https://doi.org/10.1103/PhysRevD.100.054028
C. Tang, F. Gao, Y.-X. Liu, Phys. Rev. D 100, 056001 (2019). https://doi.org/10.1103/PhysRevD.100.056001
L. Albino, A. Bashir, B. El-Bennich, E. Rojas, F.E. Serna, R.C. da Silveira, JHEP 11, 196 (2021). https://doi.org/10.1007/JHEP11(2021)196
J. Skullerud, P.O. Bowman, A. Kizilersu, in 5th International Conference on Quark Confinement and the Hadron Spectrum (2002), p. 270–272. https://doi.org/10.1142/9789812704269_0033
J. Skullerud, A. Kizilersu, JHEP 09, 013 (2002). https://doi.org/10.1088/1126-6708/2002/09/013
J.I. Skullerud, P.O. Bowman, A. Kizilersu, D.B. Leinweber, A.G. Williams, J. High Energy Phys. 04, 047 (2003). https://doi.org/10.1088/1126-6708/2003/04/047
J.I. Skullerud, P.O. Bowman, A. Kizilersu, D.B. Leinweber, A.G. Williams, Nucl. Phys. Proc. Suppl. 141, 244 (2005). https://doi.org/10.1016/j.nuclphysbps.2004.12.037
H.-W. Lin, Phys. Rev. D 73, 094511 (2006). https://doi.org/10.1103/PhysRevD.73.094511
A. Kızılersü, O. Oliveira, P.J. Silva, J.-I. Skullerud, A. Sternbeck, Phys. Rev. D 103, 114515 (2021). https://doi.org/10.1103/PhysRevD.103.114515
A. Kizilersu, D.B. Leinweber, J.-I. Skullerud, A.G. Williams, Eur. Phys. J. C 50, 871 (2007). https://doi.org/10.1140/epjc/s10052-007-0250-6
A. Sternbeck, P.-H. Balduf, A. Kizilersu, O. Oliveira, P. J. Silva, J.-I. Skullerud, A. G. Williams, PoS LATTICE2016, 349 (2017) https://doi.org/10.22323/1.256.0349
J.-I. Skullerud, A. Kızılersü, O. Oliveira, P. Silva, A. Sternbeck, PoS LATTICE2021, 305 (2022) https://doi.org/10.22323/1.396.0305
O. Oliveira, A. Kizilersu, P.J. Silva, J.-I. Skullerud, A. Sternbeck, A.G. Williams, Acta Phys. Pol. Suppl. 9, 363 (2016). https://doi.org/10.5506/APhysPolBSupp.9.363
O. Oliveira, T. Frederico, W. de Paula, J.P.B.C. de Melo, Eur. Phys. J. C 78, 553 (2018). https://doi.org/10.1140/epjc/s10052-018-6037-0
A. Ayala, A. Bashir, D. Binosi, M. Cristoforetti, J. Rodriguez-Quintero, Phys. Rev. D 86, 074512 (2012). https://doi.org/10.1103/PhysRevD.86.074512
D. Binosi, C.D. Roberts, J. Rodriguez-Quintero, Phys. Rev. D 95, 114009 (2017). https://doi.org/10.1103/PhysRevD.95.114009
A.C. Aguilar, M.N. Ferreira, B.M. Oliveira, J. Papavassiliou, L.R. Santos, https://doi.org/10.48550/arXiv.2306.16283
D. Ibañez, J. Papavassiliou, Phys. Rev. D 87, 034008 (2013). https://doi.org/10.1103/PhysRevD.87.034008
A.A. Natale, P.S. Rodrigues da Silva, Phys. Lett. B 392, 444 (1997). https://doi.org/10.1016/S0370-2693(96)01573-0
J. Fleischer, F. Jegerlehner, O.V. Tarasov, O.L. Veretin, Nucl. Phys. B 539, 671 (1999). https://doi.org/10.1016/S0550-3213(98)00705-6
E. Franco, V. Lubicz, Nucl. Phys. B 531, 641 (1998). https://doi.org/10.1016/S0550-3213(98)00438-6
P. Maris, C.D. Roberts, Int. J. Mod. Phys. E 12, 297 (2003). https://doi.org/10.1142/S0218301303001326
M.S. Bhagwat, M.A. Pichowsky, C.D. Roberts, P.C. Tandy, Phys. Rev. C 68, 015203 (2003). https://doi.org/10.1103/PhysRevC.68.015203
P.O. Bowman, U.M. Heller, D.B. Leinweber, M.B. Parappilly, A.G. Williams, J.-B. Zhang, Phys. Rev. D 71, 054507 (2005). https://doi.org/10.1103/PhysRevD.71.054507
S. Furui, H. Nakajima, Phys. Rev. D 73, 074503 (2006). https://doi.org/10.1103/PhysRevD.73.074503
V. Sauli, J. Adam Jr., P. Bicudo, Phys. Rev. D 75, 087701 (2007). https://doi.org/10.1103/PhysRevD.75.087701
L. Chang, Y.-X. Liu, M.S. Bhagwat, C.D. Roberts, S.V. Wright, Phys. Rev. C 75, 015201 (2007). https://doi.org/10.1103/PhysRevC.75.015201
A. Bashir, L. Chang, I.C. Cloet, B. El-Bennich, Y.-X. Liu et al., Commun. Theor. Phys. 58, 79 (2012). https://doi.org/10.1088/0253-6102/58/1/16
O. Oliveira, P.J. Silva, J.-I. Skullerud, A. Sternbeck, Phys. Rev. D 99, 094506 (2019). https://doi.org/10.1103/PhysRevD.99.094506
L.-F. Chen, Z. Bai, F. Gao, Y.-X. Liu, Phys. Rev. D 104, 094041 (2021). https://doi.org/10.1103/PhysRevD.104.094041
J. Berges, Phys. Rev. D 70, 105010 (2004). https://doi.org/10.1103/PhysRevD.70.105010
M. Carrington, Y. Guo, Phys. Rev. D 83, 016006 (2011). https://doi.org/10.1103/PhysRevD.83.016006
M.C.A. York, G.D. Moore, M. Tassler, JHEP 06, 077 (2012). https://doi.org/10.1007/JHEP06(2012)077
M.E. Carrington, W. Fu, T. Fugleberg, D. Pickering, I. Russell, Phys. Rev. D 88, 085024 (2013). https://doi.org/10.1103/PhysRevD.88.085024
G. Eichmann, R. Williams, R. Alkofer, M. Vujinovic, Phys. Rev. D 89, 105014 (2014). https://doi.org/10.1103/PhysRevD.89.105014
A. Blum, M.Q. Huber, M. Mitter, L. von Smekal, Phys. Rev. D 89, 061703 (2014). https://doi.org/10.1103/PhysRevD.89.061703
A.C. Aguilar, M.N. Ferreira, J. Papavassiliou, L.R. Santos, Eur. Phys. J. C 83, 549 (2023). https://doi.org/10.1140/epjc/s10052-023-11732-3
J. Skullerud, D.B. Leinweber, A.G. Williams, Phys. Rev. D 64, 074508 (2001). https://doi.org/10.1103/PhysRevD.64.074508
P. Pascual, R. Tarrach, Lect. Notes Phys. 194, 1 (1984)
T. Muta, World Sci. Lect. Notes Phys. 5, 1 (1987)
A.I. Davydychev, P. Osland, O. Tarasov, Phys. Rev. D 54, 4087 (1996). https://doi.org/10.1103/PhysRevD.59.109901
B. Blossier, P. Boucaud, F. De soto, V. Morenas, M. Gravina, O. Pene, J. Rodriguez-Quintero (ETM), Phys. Rev. D 82, 034510 (2010). https://doi.org/10.1103/PhysRevD.82.034510
P. Boucaud, F. De Soto, J. Leroy, A. Le Yaouanc, J. Micheli et al., Phys. Rev. D 79, 014508 (2009). https://doi.org/10.1103/PhysRevD.79.014508
A.C. Aguilar, D. Binosi, J. Papavassiliou, J. Rodriguez-Quintero, Phys. Rev. D 80, 085018 (2009). https://doi.org/10.1103/PhysRevD.80.085018
B.W. Mintz, L.F. Palhares, S.P. Sorella, A.D. Pereira, Phys. Rev. D 97, 034020 (2018). https://doi.org/10.1103/PhysRevD.97.034020
N. Barrios, M. Peláez, U. Reinosa, N. Wschebor, Phys. Rev. D 102, 114016 (2020). https://doi.org/10.1103/PhysRevD.102.114016
W. Schleifenbaum, A. Maas, J. Wambach, R. Alkofer, Phys. Rev. D 72, 014017 (2005). https://doi.org/10.1103/PhysRevD.72.014017
E.-M. Ilgenfritz, M. Muller-Preussker, A. Sternbeck, A. Schiller, I. Bogolubsky, Braz. J. Phys. 37, 193 (2007). https://doi.org/10.1590/S0103-97332007000200006
A.C. Aguilar, D. Ibañez, J. Papavassiliou, Phys. Rev. D 87, 114020 (2013). https://doi.org/10.1103/PhysRevD.87.114020
A.C. Aguilar, M.N. Ferreira, C.T. Figueiredo, J. Papavassiliou, Phys. Rev. D 99, 034026 (2019). https://doi.org/10.1103/PhysRevD.99.034026
Acknowledgements
We thank J. Rodríguez-Quintero and O. Oliveira for useful communications. The work of A. C. A. is supported by the CNPq grant 307854/2019-1. A. C. A also acknowledges financial support from project 464898/2014-5 (INCT-FNA). D. I. acknowledges the support provided by the University Centre EDEM. M. N. F. and J. P. are supported by the Spanish MICINN grant PID2020-113334GB-I00. M. N. F. acknowledges financial support from Generalitat Valenciana through contract CIAPOS/2021/74. J. P. also acknowledges funding from the Generalitat Valenciana grant CIPROM/2022/66.
Author information
Authors and Affiliations
Corresponding author
Appendices
Appendix A: Input fits
In this Appendix we present the fits to lattice data for the propagators and vertex form factors used as external inputs in our calculations. These fits capture a variety of physical properties in the infrared, discussed elsewhere [14, 51, 52], and reproduce the one-loop anomalous dimensions of the corresponding functions in the ultraviolet [56, 122,123,124].
The fitting functions employed share certain basic building blocks, which differ only in the specific values that some sets of parameters acquire in each case. In particular, the parameters \(\delta \), \(\kappa \), \(\eta _i\), and \(b_i\) appear in various fits, taking distinct numerical values in each case. The sets of numerical values employed are displayed in Table 2.
For the unquenched quantities \(\Delta (r^2)\), \(F(r^2)\) and \( L _{{sg}}(r^2)\), we employ the functional forms
where we define \(\beta _0 = 11 - 2N_f/3\),
and the parameter \(\nu = 1\) GeV makes the dimensionalities of \(R(r^2)\) and \(\Delta ^{-1}(r^2)\) consistent without changing the dimensions of the parameters \(b_i\). Note that the factor \((r^2/b_{3})^2\) in the denominator of the second term in Eq. (A3) enforces the property \(R(r^2) \rightarrow 0\) at \(r\rightarrow \infty \), so that the standard one-loop resumed expressions for \(\Delta (r^2)\) and \(F(r^2)\) [56, 122,123,124] are recovered in the ultraviolet. In addition, the factor of 1.16 in \( L _{{sg}}(r^2)\) converts the lattice data of [51] to the \(\widetilde{\text {MOM}}\) scheme [see Eq. (B17)].
The lattice data of [92, 112] for the quark propagator are given in terms of the quark wave function, \(A^{-1}(p^2)\), and running mass,
These are fitted with
and
Finally, the fit for \(\lambda _1(p^2)\) is obtained with
The values of the fitting parameters are collected in Table 2 and its caption. The resulting curves for \(\Delta (r^2)\) and \(\lambda _1(p^2)\) are compared to the corresponding lattice data in the left panels of Figs. 8 and 10; the functions \(F(r^2)\), \( L _{{sg}}(r^2)\), \(A^{-1}(p^2)\), and \({{\mathcal {M}}}(p^2)\) are shown in Fig. 11.
Appendix B: Changing renormalization schemes
In this Appendix we show how the lattice inputs given in different renormalization schemes may be converted to the \(\widetilde{\text {MOM}}\), defined in Eq. (4.8).
We begin by introducing the renormalization constants
where \(m_q\) is the current quark mass and we denote with subscripts “\(\textrm{B}\)” and “\(\textrm{R}\)” the bare and renormalized quantities, respectively. Then, the various STIs of the theory lead to the relations [1]
Moreover, in the Landau gauge, we have that \(Z_H = Z_1\), where \(Z_1\) is finite [45]. From now on, the index “R” will be substituted by the notation introduced below, identifying the different renormalization schemes under consideration.
Specifically, the required conversions involve three different renormalization schemes, namely:
-
1.
The \(\widetilde{\text {MOM}}\) scheme, defined by Eq. (4.8), which is used in the lattice determination of \(\lambda _1(p^2)\). Quantities without any special renormalization index, e.g., \(\lambda _1(p^2)\), will be understood to be renormalized in the \(\widetilde{\text {MOM}}\) scheme.
-
2.
The “asymmetric MOM” scheme,
$$\begin{aligned}{} & {} \Delta _{\mathrm{{\scriptscriptstyle asym}}}^{-1}(\mu ^2) = \mu ^2, \quad F_{\!\!\mathrm{{\scriptscriptstyle asym}}}(\mu ^2) = 1 ,\nonumber \\{} & {} A_{\mathrm{{\scriptscriptstyle asym}}}(\mu ^2) = 1 , \quad L _{{sg}}^{\mathrm{{\scriptscriptstyle asym}}}(\mu ^2) = 1 , \end{aligned}$$(B3)which is specified by the index “asym”. This scheme was used in [51] for the lattice determination of the (\(N_f = 3\)) classical form factor \( L _{{sg}}(p^2)\) of the three-gluon vertex.
-
3.
The Taylor scheme, which capitalizes on the Landau gauge finiteness of the ghost-gluon vertex [45], and is defined by the prescription
$$\begin{aligned}{} & {} \Delta _{\mathrm{{\scriptscriptstyle T}}}^{-1}(\mu ^2) = \mu ^2, \quad F_{\mathrm{{\scriptscriptstyle T}}}(\mu ^2) = 1 , \nonumber \\{} & {} A_{\mathrm{{\scriptscriptstyle T}}}(\mu ^2) = 1 , \quad Z^{\mathrm{{\scriptscriptstyle T}}}_1 = Z^{\mathrm{{\scriptscriptstyle T}}}_H = 1 , \end{aligned}$$(B4)where we assign an index “\(\textrm{T}\)” to quantities renormalized in this scheme. The value of the coupling constant determined in the Taylor scheme in [125] will be used to determine the coupling constants in the above two schemes.
Now, let us note that combining Eq. (B1) with each of the renormalization prescriptions of Eqs. (4.8),(B3) and (B4) implies
since the bare gluon propagator does not depend on the renormalization scheme. Similarly, \(F(p^2) = F_{\!\!\mathrm{{\scriptscriptstyle asym}}}(p^2) = F_{\mathrm{{\scriptscriptstyle T}}}(p^2)\) and \(A(p^2) = A_{\mathrm{{\scriptscriptstyle asym}}}(p^2) = A_{\mathrm{{\scriptscriptstyle T}}}(p^2)\). In addition, for the renormalization group invariant (RGI) quark mass function, \({{\mathcal {M}}}(p^2)\), defined in Eq. (A4), we use fits to the L07 and L08 lattice data of [92, 112]; therefore the renormalization of the current mass, \(m_q\), does not need to be explicitly implemented. Then, since \({{\mathcal {M}}}(p^2)\) is RGI and \(A(p^2)\) is the same for all schemes we employ, it follows that so is the function \(B(p^2)\). Hence, we can suppress the indices specifying renormalization schemes in all of the propagators.
On the other hand, the renormalization constant of a given vertex has a different value in each of the above schemes, e.g., \(Z_3^{\mathrm{{\scriptscriptstyle asym}}} \ne Z_3\). As it turns out, the ratios between these values, e.g., \(Z_3^{\mathrm{{\scriptscriptstyle asym}}}/Z_3\), can be conveniently expressed in terms of three special RGI effective couplings, defined in terms of the quark–gluon, three-gluon, and ghost-gluon vertices as
Note that the \(\alpha _{{\scriptscriptstyle cg}}(p^2)\) is the well-known Taylor coupling measured on the lattice [125,126,127], which takes advantage of the fact that, in the Landau gauge, the unrenormalized ghost-gluon vertex in the soft-ghost configuration reduces to tree-level [45], i.e., \(B_1^{\mathrm{{\scriptscriptstyle B}}}(p^2,0,p^2) - B_2^{\mathrm{{\scriptscriptstyle B}}}(p^2,0,p^2) = 1\), in the language of Eq. (5.2).Footnote 7
1.1 1. Taylor to \(\widetilde{\text {MOM}}\) conversion and the value of \(Z_H\)
To convert the value of the coupling between the Taylor and \(\widetilde{\text {MOM}}\) schemes, let us first note that Eqs. (B1) and (B2) imply
Then, using Eq. (4.8) to write the renormalization constants in terms of the bare Green’s functions, one shows that
Now, we can use Eq. (B8) to determine \(\alpha _{{\scriptscriptstyle qg}}(p^2)\) from the known \(\alpha _{{\scriptscriptstyle cg}}(p^2)\) of [125]. First, at a large momentum scale, here chosen as \(\nu = 7\) GeV, we can evaluate Eq. (B8) at one loop with massless quarks. Using the well-known fact that \(A_{\mathrm{{\scriptscriptstyle B}}}(p^2) = 1\) to one loop in the Landau gauge [122, 123], together with the corresponding one-loop results for \(F_{\!\mathrm{{\scriptscriptstyle B}}}(\nu ^2)\) and \(\lambda _1^{\mathrm{{\scriptscriptstyle B}}}(\nu ^2)\) given in [56], we find
Then, using the Taylor scheme value of [125] for \(\alpha _s(\nu = 7~\text {GeV}) = 0.223\), we obtain that \(Z_H(\nu = 7~\text {GeV}) = 1.013\), and therefore \(\alpha _{{\scriptscriptstyle qg}}(\nu = 7~\text {GeV}) = 0.217\).
Then, since \(\alpha _{{\scriptscriptstyle qg}}(p^2)\) is RGI, we can rewrite Eq. (B6) in terms of quantities renormalized in the \(\widetilde{\text {MOM}}\) scheme with \(\mu = 2\) GeV, i.e.,
and we determine the corresponding value of
by requiring that Eq. (B10) reproduces the previously determined value of \(\alpha _{{\scriptscriptstyle qg}}(\nu = 7~\text {GeV})\).
Lastly, with the full momentum dependence of \(\alpha _{{\scriptscriptstyle qg}}(p^2)\) in hand, we return to Eq. (B8) to determine
1.2 2. Asymmetric MOM to \(\widetilde{\text {MOM}}\) conversion
Now we consider the conversion of \( L _{{sg}}(p^2)\) from the asymmetric to the \(\widetilde{\text {MOM}}\) scheme.
To this end, note first that Eq. (B1) implies
Then, our task amounts to computing the ratio \(Z_3/Z_3^{\mathrm{{\scriptscriptstyle asym}}}\).
Next, it follows from the renormalization condition of Eq. (B3) that \(Z_3^{\mathrm{{\scriptscriptstyle asym}}} = 1/ L _{{sg}}^{\mathrm{{\scriptscriptstyle B}}}(\mu ^2)\), whereas Eqs. (4.8) and (B2) imply
Hence, by combining the above results we obtain
Now, to fix the value of \(\alpha _{{\scriptscriptstyle 3g}}(\mu ^2)\) we use the same strategy used in the determination of \(\alpha _{{\scriptscriptstyle qg}}(p^2)\).
At a large momentum scale, \(\nu = 7\) GeV, we can evaluate the combination of bare Green’s functions at one loop. Using the textbook result for \(\Delta _{\mathrm{{\scriptscriptstyle B}}}(\nu ^2)\) and \(A_{\mathrm{{\scriptscriptstyle B}}}(\nu ^2) = 1\) [122, 123] and the results of [56, 124] for the vertices we obtain
which implies \(\alpha _{{\scriptscriptstyle 3g}}(\nu = 7~\text {GeV}) = 0.249\).
Then, from the RGI nature of \(\alpha _{{\scriptscriptstyle 3g}}(p^2)\), we can compute its entire momentum dependence using ingredients renormalized in the asymmetric scheme. In particular, we obtain the three-gluon coupling \(\alpha _{{\scriptscriptstyle 3g}}(\mu = 2~\text {GeV}) = 0.635\), and
Appendix C: Unquenched ghost-gluon vertex
In this Appendix we briefly describe the determination of the classical form factor \(B_1(r^2,k^2,q^2)\) of the ghost-gluon vertex [see Eq. (5.2)], which is relevant for the calculation of the quark-ghost form factors, \(K_i\).
The one-loop dressed SDE of the ghost-gluon vertex is formally identical to its quenched version, given diagrammatically in Fig. 12 of [14]; the dependence on \(N_f\) enters through the various quantities comprising the diagrams, such as the coupling, the gluon and ghost propagators, and the three-gluon vertex.
For the three-gluon vertex, we use the approximation given in Eq. (4.3). Then, an appropriate tensor projection of the SDE yields a dynamical equation for \(B_1(r^2,k^2,q^2)\), which is given by Eq. (88) of [14]. Finally, this equation is solved numerically, using Eq. (B11) for \(\alpha _s\), the L08 setup value given in Eq. (B12) for \(Z_1 = Z_H\), and the fits given by Eq. (A1) for \(\Delta (r^2)\), \(F(r^2)\) and \( L _{{sg}}(r^2)\).
To expedite the comparison between \(N_f = 2\) and quenched results for the ghost-gluon vertex, we will show its classical form factor renormalized in the Taylor scheme, \(B_1^{\mathrm{{\scriptscriptstyle T}}}\). Its \(\widetilde{\text {MOM}}\) value, \(B_1\), is obtained immediately through
where \(Z_H\) is given by Eq. (B12).
On the left panel of Fig. 12 we show \(B_1^{\mathrm{{\scriptscriptstyle T}}}(r^2,k^2,q^2)\) as a function of the magnitudes of the ghost and gluon momenta, k and q, respectively; for the angle \(\phi \) between them we choose the representative value \(\phi = 2\pi /3\). On this panel we note that \(B_1^{\mathrm{{\scriptscriptstyle T}}}(r^2,k^2,q^2)\) has the same qualitative behavior as its quenched form obtained in various studiesFootnote 8 [24, 26, 44, 53, 130,131,132,133]. In particular, it is nearly identical in shape to the result shown in Fig. 13 of [14], which uses the same approximation of Eq. (4.3) for the three-gluon vertex.
Next, we focus on the soft-ghost limit (\(k = 0\)), which appears as an ingredient in Eq. (5.3) for the \(K_i(p^2)\). This limit corresponds to the slice highlighted as an orange continuous curve on the left panel of Fig. 12. On the right panel of the same figure, we compare the \(N_f = 2\) value of \(B_1^{\mathrm{{\scriptscriptstyle T}}}(q^2,0,q^2)\) to its quenched counterpart computed in [14], represented here as a blue dashed line. The results are found to differ by less than \(2.75\%\) within the entire momentum range, and are virtually indistinguishable for \(q < 1\) GeV. Their most noticeable difference is in the ultraviolet, where the \(N_f = 2\) result is seen to be systematically larger than its quenched version. The same pattern is found for all kinematic configurations.
Note that the observed enhancement of the unquenched \(B_1^{\mathrm{{\scriptscriptstyle T}}}(q^2,0,q^2)\) in the ultraviolet is compatible with perturbation theory. Indeed, a one-loop calculation yields
which depends on \(N_f\) only through the value of \(\alpha _s^{\mathrm{{\scriptscriptstyle T}}}\). Then, since \(\alpha _s^{\mathrm{{\scriptscriptstyle T}}}\) increases with \(N_f\) [98], so does \(B_1^{\mathrm{{\scriptscriptstyle T}}}(q^2,0,q^2)\).
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
Funded by SCOAP3. SCOAP3 supports the goals of the International Year of Basic Sciences for Sustainable Development.
About this article
Cite this article
Aguilar, A.C., Ferreira, M.N., Ibañez, D. et al. Schwinger displacement of the quark–gluon vertex. Eur. Phys. J. C 83, 967 (2023). https://doi.org/10.1140/epjc/s10052-023-12103-8
Received:
Accepted:
Published:
DOI: https://doi.org/10.1140/epjc/s10052-023-12103-8