Abstract
We study the discovery and discriminating prospects of the Higgs portal dark matter (DM) models for scalar, fermion and vector DM and their extensions in proton–proton (pp) collisions. The \(t\bar{t}+\)DM associated production in dileptonic final states is considered, in which the stransverse mass of two leptons is found to be effective in suppressing the Standard Model backgrounds along with the missing transverse energy and the angle between two leptons. The distributions of missing transverse energy and polar angle between two leptons are used for a discrimination of the spin nature of DM. For the proposed benchmark points, the discovery/exclusion can be made with an integrated luminosity less than 1 ab\(^{-1}\) given a 1% systematic uncertainty, while the spin discrimination require integrated luminosity of a few O(10) ab\(^{-1}\) given a 0.5% systematic uncertainty. The DM phenomenology is also discussed. A consistent DM candidate can be obtained either by extending our model where the Higgs portal couples to excited dark states that decay into DM, or modifying the coupling form into pseudoscalar.
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
1 Introduction
The existence of dark matter (DM) has been confirmed by astrophysical observations, such as galaxy rotation curve [1], bullet cluster collision [2], cosmic microwave background (CMB) anisotropy [3]. A precise measurement by the Plank satellite [4] indicates that 26% of the total energy of our universe is made of nonbaryonic DM. Even with null results from underground direct detection experiments and lepton/hadron colliders, there are its elusive hints at a few indirect detection experiments in the space recently, e.g. Fermi-LAT galactic center excess [5], AMS02 anti-proton excess [6] and DAMPE electron/positron anomaly [7]. However, interpretations in terms of DM annihilation/decay are rather ambiguous because of astrophysical uncertainties.
In contrast to those indirect detection experiments, probing the DM signals at colliders could elucidate the particle physics properties of DM (e.g., couplings, spins) without suffering from astrophysical uncertainties. In the framework of a simplified model, where the DM is neutral under the Standard Model (SM) gauge group and interacting with the SM particles via the portal of a single mediator, many studies [8,9,10,11,12,13,14,15] are devoted to identify the spin (CP property) of the mediator and resolve the coupling between the mediator and SM particles. However, all those searches mainly focus on the properties of the mediator, and the DM information is usually unavailable. Because the DM is dominantly produced by the decay of the on-shell mediator in the simplified model, those visible final states do not carry any useful information on the particle physics nature of the DM. Many other studies [16,17,18] consider the characterization of DM spin and its coupling to SM particles in the framework of DM effective field theory (EFT). The DM EFT, which is mainly advantaged by its generality, may not be an appropriate description of an UV-completion at the colliders [19,20,21,22,23,24]. The DM characterizations in simplified models of some UV-completions are studied until recently. Refs. [25, 26] studied the DM spin discrimination in the Higgs portal DM models at future electron-positron collider. It was also found that the DM spin can also be revealed at LHC through its radiative corrections to the Drell–Yan process [27] and spectral decomposition of the mono-jet signature [28]. Reference [29] shows that the DM properties can be determined by combining both the direct detection and collider signals.
In this paper, as proceeding to our works in Refs. [25, 26], we study the discovery and spin discriminating prospects of Higgs portal DM models with scalar DM, fermion DM and vector DM at future hadron colliders. It was found in our previous study [30] that the Higgs portal DM model is well below the current sensitivity of LHC, due to its small scalar mixing angle as required by the SM Higgs precision measurement. Even the high luminosity LHC would only be able to probe some portion of the parameter space in the Higgs portal DM models. On the other hand, 100 TeV colliders [31, 32] have been proposed to explore directly a much larger region of the landscape of new physics models, such as FCC-hh and SppC. The target integrated luminosity can reach as high as 25 ab\(^{-1}\) [33]. So we conduct our studies at 100 TeV proton–proton collider in this work. At the LHC, the DMs in the Higgs portal models are usually searched through the mono-jet signature, due to its largest production cross section. However, recent experimental results [34, 35] show that the \(t\bar{t} +\) DM associated production has a comparable sensitivity with the mono-jet channel if the SM fermions-mediator couplings are proportional to Yukawa couplings. The \(t\bar{t} +\) DM production will be benefited much more than the mono-jet channel by increasing the collision energy from 14 to 100 TeV collider. Much smaller energy fraction is required from the parton distribution function of proton, which results in a dramatically increased production cross section. Furthermore, the \(t\bar{t}+\) DM signature provides useful observables for the DM spin discrimination.
This paper is organized as follows. In Sect. 2, the models are introduced and some possible DM spin discrimination variables are proposed. Section 3 details the collider searches for the DM and the strategy for the spin discrimination based on a few benchmark points. For completeness, the DM phenomenology are studied in Sect. 4, where two possible solutions to evade the stringent results by DM direct detection experiments are discussed. We summarize the work in Sect. 5.
2 Models and signals
In this work, we will consider minimal Higgs portal DM models for scalar, fermion and vector DM particles, which are required to conserve the SM gauge symmetry and renormalizability. Since the models have been discussed in Refs. [26, 36, 37], we simply list the interaction Lagrangians for three types of Higgs portal DM models relevant to the collider phenomenology.
where the subscripts SDM, FDM and VDM denote scalar DM, fermion DM and vector DM, respectively. The important fact is that there is only one scalar mediator, i.e. the SM Higgs (h), in the SDM case, while there is an extra singlet scalar in FDM and VDM cases because of the full SM gauge symmetry and U(1) dark gauge symmetry. This singlet scalar shall mix with the SM Higgs, giving two scalar mediators in the mass eigenstates (\(H_1\), \(H_2\)) with a mixing angle (\(\alpha \)).
For the DM production with top quark pair, the dominant ones are presented in the Fig. 1. To understand the main kinematic features for each DM spin, it will be illustrative to present the differential production cross sections with respect to the variable \(t \equiv m^2_{DD} = (p_{D_1} +p_{D_2})^2\). Because of the scalar nature of the mediators, the differential cross section can be factorized into the off-shell mediator production with mass t and its decay:
Detailed derivation of above relations are given in Appendix A. According to Eqs. 2.4–2.6, if there is DM with mass above half of the SM Higgs boson mass (same as \(H_1\) mass) while below half of the \(H_2\) mass (thus \(\sqrt{t} > m_{h/H_1}\)), the t distribution of SDM will be suppressed by the propagator at larger t and that of FDM/VDM will be peaked at \(m_{H_2}\). For FDM and VDM, the distributions of t at tails will be also different due to the weight factors from matrix element calculation, i.e. \(2t - 8 m_\chi ^2\) for FDM and \(2+ \frac{(t-2 m^2_V)^2}{4 m_V^4}\) for VDM. This point can become clear if we choose some benchmark points and show the results numerically.
There are totally four parameters of relevance in the FDM model for collider phenomenology: \(g_{\chi }\), \(\sin \alpha \), \(m_\chi \) and \(m_{H_2}\). The benchmark points are chosen to guarantee sufficient DM production rates at colliders while consistent with current Higgs precision measurements. So we take \(g_{\chi }=3\), \(\sin \alpha =0.3\), \(m_\chi =80\) GeV and four different \(m_{H_2} = \{ 200, ~300, ~400,~500 \}\) GeV, which will be denoted by FDM200, FDM300, FDM400 and FDM500, respectively. The partial width of \(H_2 \rightarrow H_1 H_1\) is assumed to be negligibleFootnote 1 and then \(H_2\) is dominantly decay into \(\chi \bar{\chi }\), e.g. Br\((H_2 \rightarrow \chi \chi ) > 96\%\) for all benchmark points. We note that future precision measurement of Higgs signal strength which could reduce the allowed \(\sin \alpha \) can only lead to a total rescaling in production cross section in our discussion.
The parameters for the VDM model are chosen accordingly: \(\sin \alpha = 0.3\) and \(m_V =80\) GeV. The decay width of \(H_2\) is an observable which may be determined from other measurements. Also we wish to keep the branching ratios of \(H_2 \rightarrow V V\) the same as those of \(H_2 \rightarrow \chi \chi \). Therefore the \(g_V\) for each benchmark point is chosen to keep the total decay width of \(H_2\) the same with that in the FDM case. Table 1 provides the \(g_V\) values of VDM benchmark points (VDM200, VDM300, VDM400 and VDM500) and the corresponding \(H_2\) decay widths.
As for the SDM model, there are only two free parameters: \(m_S\) and \(\lambda _{HS}\). To coincide with the choice in FDM model, in the following study of DM spin discrimination, we take \(m_S=80\) GeV and \(\lambda _{HS}\) is chosen such that the number of signal events after all selections are kept the same as that of each benchmark point of the FDM model. However, changing the \(\lambda _{HS}\) can only lead to total rescaling of the signal cross section and will not affect the kinematic variable distributions in the SDM case.
Based on those proposed benchmark points, we plot the distributions of \(m_{DD} \equiv \sqrt{t}\) for the DM pair production through the \(t\bar{t}\) associate channel at 100 TeV pp collider in Fig. 2.
In the left panel of the figure, we can see that for the SDM, the event fraction is largest for \(m_{DD} \sim 2 m_D\) and drops quickly with increasing \(m_{DD}\) due to the propagator as well as the phase space suppression. The \(m_{DD}\) distributions for benchmark points of FDM model are peaked at \(m_{DD} \sim m_{H_2}\) because of the resonant enhancement. We can also observe the interesting interference effects between two scalar mediators [30]: (1) the destructive interference in the region \(m_{DD} > m_{H_1/ H_2}\), e.g. the distribution of FDM200 is dropping more rapidly than SDM in the region \(m_{DD} \gtrsim 200\) GeV; (2) the constructive interference in the region \(m_{DD} \in [m_{H_1}, m_{H_2}]\) which leads to relatively flat event fraction in this mass region. The event fraction distributions of VDM benchmark points follow similar features as those of FDM, because of the same propagator structure. However, as we have calculated before, the different t variable dependence in the matrix element of scalar to DMs decay will leads to distinguishable deviation in the \(m_{DD} \equiv \sqrt{t}\) distributions (see Eqs. 2.4–2.6). Since the weight factor of FDM depends linearly on t while that of VDM is quadratic, we can expect that VDM will have more event fraction in the large \(m_{DD}\) region, as being demonstrated in the lower subplot. The ratio between the event fractions of VDM and FDM is smaller than unit when \(m_{DD} \lesssim m_{H_2}\) and greater than unit when \(m_{DD} \gtrsim m_{H_2}\). This behavior is more visible for a benchmark point with heavy \(H_2\) where the resonance enhancement is not that severe. We also stress that this argument still persist when the next-to-leading order (NLO) corrections are included. In the right panel of the same figure, we plot the \(m_{DD}\) distributions with the NLO QCD correction. All distributions are almost unaltered.
We know that the \(m_{DD}\) is corresponding to the off-shell mass of a virtual scalar that is produced recoiling against two top quarks. For a given collision energy at pp collider, a heavier virtual scalar would lead to less energy in the recoiling top quark pair, thus larger angular difference between the two top quarks. There are two angular variables that can be used to characterize the top quark separation: the azimuthal angle difference \(\Delta \phi (t,t)\) and the polar angle difference \(\cos \theta (t,t) \equiv \tanh (\Delta \eta (t,t)/2)\). We find they work equally well in our study so we simply focus on the polar angle difference throughout this work [9]. In the upper-left panel of Fig. 3, the distributions of the \(\cos \theta (t,t)\) for all benchmark points are presented. Comparing to the Fig. 2, we can find the high correlation between the \(m_{DD}\) and \(\cos \theta (t,t)\) distribution: (1) the SDM has quite similar \(\cos \theta (t,t)\) shape with the FDM200/VDM200 since their \(m_{DD}\) distributions are close; (2) for either FDM or VDM case, with the increasement of \(H_2\), \(m_{DD}\) is distributed toward larger value, which in turn leads to larger angular separation; (3) the difference between FDM and VDM is still appreciable in the \(\cos \theta (t,t)\) distribution.
However, we are considering the dileptonic decaying top quark pair of this channel. It will be impossible to reconstruct the directions of the two tops at the detector, because of multiple invisible particles in the final states. On the other hand, the direction of the charged lepton from the top quark decay is correlated to the top quark spin axis, so the angular variables of the leptons can be used as proxies for the top quark angles. The distributions of polar angle difference between two leptons (\(\cos \theta (\ell ,\ell )\)) are given in the upper-right panel of Fig. 3, which indeed look similar to the distributions of \(\cos \theta (t,t)\). The smearing effect due to this indirect measurement makes the distinction among different scenarios slightly harder.
Finally, we also show the distributions of both \(\cos \theta (t,t)\) and \(\cos \theta (\ell ,\ell )\) at NLO in lower plots of Fig. 3. Because the differences in both \(\cos \theta (t,t)\) and \(\cos \theta (\ell ,\ell )\) mainly originate from the \(m_{DD}\) distributions which is however not altered by the NLO correction, the changes in the distributions of \(\cos \theta (t,t)\) and \(\cos \theta (\ell ,\ell )\) after considering NLO effect are found to be quite small, even though we can observe slightly increased deviations among different scenarios according to the Monte Carlo simulation.
3 Collider searches
We generate the signals and SM backgrounds events at NLO level within the framework of MadGraph5_aMC@NLO program [38, 39]. The UFO model files which include the NLO QCD counterterms are generated by the FeynRules [40, 41]. MadSpin [42] is used to generate decays of the top quark and the W boson in the final state in order to maintain the angular information of the decay products. The Pythia8 [43] is used for parton showering and hadronization. The final state jets are clustered using anti-k\(_T\) algorithm with parameter \(R=0.4\) as implemented in Fastjet [44]. Finally, the detector effects are simulated by using Delphes [45], where we adopt the ATLAS configuration card to mimic the smearing and reconstruction efficiency at future collider.Footnote 2 The b-tagging efficiency [46] is set to be 70%, and the corresponding mis-tagging rates for the charm- and light-flavor jets are taken to be 0.15 and 0.008, respectively.
Because of suppression of the SM background and precise measurement of leptons angles, we only consider the dileptonic channel in \(t(\rightarrow b \ell \nu ) \bar{t}(\rightarrow b \ell \nu ) +\) DMs production at 100 TeV pp collider. The dominant SM background processes are associated tW and \(t\bar{t}\) production in dileptonic channels as well as \(t\bar{t}Z(\rightarrow \nu \nu )\) production. The latter is particularly important when a hard cut on the \(E^{\text {miss}}_T\) is applied. Moreover, we find that the \(t\bar{t} W\) can also be subdominating, if the lepton in \(W\rightarrow \ell \nu \) decay is not detected in the detector.
3.1 Search strategy
Our preselection of signal events require exactly two opposite sign leptons (\(e,~\mu \)) and at least one b jet in the final state.Footnote 3 The leptons should have \(p_T >20\) GeV and \(|\eta |<2.5\), as well as be isolated: the scalar sum of transverse momenta of all particles with \(p_T >0.5\) GeV that lie within a cone of radius \(R=0.5\) around the \(e(\mu )\) is less than 12%(25%) of the transverse momentum of the \(e(\mu )\). The b-jets need to fulfill \(p_T >25\) GeV and \(|\eta |<2.5\) to ensure relatively high tagging efficiency. In the second and third rows of Table 2, the cross sections of backgrounds [31] and signals before and after preselections are given. The NLO QCD corrections have been taken into account. For the cross section of \(t\bar{t}\) process, we require at least one top quark to decay leptonically and the missing transverse momentum due to the neutrino in the final state to be larger than 100 GeV. Since we only required one b-jet in the final state, the WWb with dileptonic decaying W pair is also an important background for our analysis. This process is dominated by the tW production with subsequent top quark decay \(t\rightarrow bW\). We can find the preselection reduces the background cross sections by a factor of a few \(\mathcal {O}(10)\), partly because of the branching ratio suppression. Signal benchmark points with different masses are all reduced by a similar amount, i.e. a factor of 5, mainly originating from the lepton reconstruction efficiency.
A few cuts on some kinematic variables are applied to further improve the signal and background discrimination. To reject the two leptons from Z boson decay in the \(t\bar{t}Z\) background, the two lepton invariant mass \(m_{\ell \ell } \equiv \sqrt{(p_{\ell _1} + p_{\ell _2})^2}\) should be far from the Z pole, \(m_{\ell \ell } \notin [85,95]\) GeV. The cross section of \(t\bar{t}Z\) after the preselection can be decreased to half after imposing this condition, while others are kept almost the same.
For our benchmark points, the mediator of mass around a few \(\mathcal {O}(100)\) GeV is produced in association with top quarks. So the signals will typically have harder spectrum in \(E^{\text {miss}}_T\) than the backgrounds where the missing transverse energy is from either neutrino in top quark decay or neutrinos (and missing leptons) from vector boson decay. The distributions of \(E^{\text {miss}}_T\) after preselections are ploted in the left panel of Fig. 4. We can see that even though both signals and background distributions peak at around 100–200 GeV, the signals have much flatter tail than the background especially for benchmark points with heavy \(H_2\). At this stage, we simply apply cut \(E^{\text {miss}}_T > 150\) GeV. The shape information of \(E^{\text {miss}}_T\) will be used later for more dedicated analysis. The efficiency of this cut can be seen in the fifth row of Table 2.
Another useful and less correlated discriminating variable is the lepton pair stransverse mass [47],
where the \(m_T(\vec {p}^{\ell }_T, \vec {p}^{D_1}_T) = \sqrt{2 p_T^{\ell } p_T^{D_1} (1-\cos \theta ) }\) is the transverse mass of the \(\ell _1 D_1 \) system. The stransverse mass has been demonstrated to be very powerful in characterizing the mass scalar of heavy particle which is produced in pair and subsequently decay into both visible and invisible particles. For the \(t\bar{t}\) background, the two leptons in the final state come from the W boson decay. So the \(m_{T_2} (\ell , \ell )\) will drop rapidly at around \(m_W\), as shown clearly in the right panel of Fig. 4. We apply a relatively stringent cut on the stransverse mass variable in order to reduce the background to a manageable level, \(m_{T_2}(\ell ,\ell )>150\) GeV. We can see from the last row of Table 2. It reduces the cross sections of \(t\bar{t}\) and WWb backgrounds by three orders of magnitude and two orders of magnitude, respectively. As for \(t\bar{t}V\) background and signal processes, some of the missing transverse momenta are coming from vector boson decay or DMs, the falling of the tails for which is much flatter than that of \(t\bar{t}\) backgrounds. The \(t\bar{t} W\) and \(t\bar{t}Z\) events are reduced by factors of thirty and ten, respectively. As a consequence, the cross section of \(t\bar{t}Z\) background becomes comparable to that of \(t\bar{t}\) events after considering the \(m_{T_2}(\ell ,\ell )\) requirement. Due to the heaviness of the mediator in signal process, this cut only reduce the signals by factors around four.
In Table 2, the background cross sections are still around two order of magnitude larger than signal processes. With a signal significance estimator (ignoring the systematic uncertainty)
we find that benchmark points FDM200, FDM300, FDM400 and FDM500 will be excluded at 2\(\sigma \) level with the integrated luminosity of 509, 1001, 1319 and 1741 fb\(^{-1}\), respectively.
New, the discovery prospects are evaluated by using the shape information of \(E^{\text {miss}}_T\) distributions. Figure 5 shows the distributions of \(E^{\text {miss}}_T\) for signals and background after applying all selection cuts. Due to the relatively high energy scale of signal processes, the event fraction of signals decrease much slower than the background with increasing \(E^{\text {miss}}_T\). In order to quantify the difference between the signal and background in terms of the \(E^{\text {miss}}_T\) distributions including the information of total normalization, we adopt the binned log-likelihood analysis [15].
We first consider the \(E^{\text {miss}}_T\) distribution of total background (weighted sum among all processes) as null hypothesis (\(\mathcal {H}_0\)) and that of background plus one of the benchmark points as test hypothesis. Due to the limited number of total events after all selections, the \(E^{\text {miss}}_T\) distributions are divided into 11 bins within the range of [150, 700] GeV. In each bin, the probability that the i-th bin with the expected value of \(t_i\) has \(n_i\) observed events obeys the Poisson distribution, i.e. \(({t_i^{n_i} e^{-t_i} })/ {n_i!}\). So we can determine the probability of the full distribution by multiplying the probability of each bin, giving the binned likelihood
Here i runs over 11 bins and \(\mathcal {H}_\alpha \) corresponds different hypothesis. Then, we can define the test statistic \(\mathcal {Q}\) as the log likelihood ratio between a given hypothesis and the null hypothesis
Finally, we use the distributions of \(E^{\text {miss}}_T\) in hypothesis \(\mathcal {H}_0\) and \(\mathcal {H}_{\alpha , ~\alpha >0}\) to generate two sets of pseudodata. Each set of pseudodata will give a distribution of the test statistics. Using those two distributions of \(\mathcal {Q}\), we can calculate the p value of the test hypothesis (\(\mathcal {H}_{\alpha , ~\alpha >0}\)) by assuming that the actual observation is at the center of \(\mathcal {Q}\) distribution under null hypothesis.
The p values for those FDM benchmark points are shown in Fig. 6 with varying the integrated luminosity, where the 95% exclusion (probing) limit is also indicated by the horizontal dashed line. The widths of bands are showing the sensitivities without systematic uncertainty (lower boundary) and assuming systematic uncertainty of 1% (upper boundary).Footnote 4 By considering the shape of the \(E^{\text {miss}}_T\) distributions, the required integrated luminosities for 2\(\sigma \) sensitivity are roughly reduced by half for all benchmark points (250 fb\(^{-1}\), 500 fb\(^{-1}\), 750 fb\(^{-1}\) and 1000 fb\(^{-1}\) for FDM200, FDM300, FDM400 and FDM500 with systematic uncertainty less than \(\sim 1\%\), respectively). Our benchmark points will be tested in an early stage at the future pp collider.
3.2 Discrimination prospects
Once an excess in dilepton + \(E^{\text {miss}}_T\) events is observed, it will be important to identify the underlying new physics. This subsection is devoted to distinguish the benchmark points with different DM spins as proposed in Sect. 2.
As seen in Fig. 5, the \(E^{\text {miss}}_T\) distribution of SDM is similar to that of FDM/VDM with \(H_2=200\) GeV, but it is quite different from those with heavier \(H_2\). Given \(H_2\) mass, the VDM has harder \(E^{\text {miss}}_T\) spectrum than FDM due to the same reason as explained for \(m_{DD}\) distribution in previous section (see discussions on Fig. 2). Moreover, the signal rates are also different between benchmark points of FDM and VDM, especially when the \(H_2\) is heavy. This motivates us to study the spin discrimination by using the binned log-likelihood test again. But here, for each \(H_2\) mass, the null hypothesis is the SM background plus a FDM benchmark point and the test hypothesis is the SM background plus the corresponding benchmark point of VDM or SDM. We note that the benchmark point of SDM model has the same number of events after all selections with that of FDM model.
The p values for spin discrimination with varying integrated luminosity are plotted in Fig. 7. The future 100 TeV pp collider will be able to accumulate approximately 30 ab\(^{-1}\) data [33]. It will be possible to distinguish FDM and VDM when the mediator (\(H_2\)) mass is either light (\(m_{H_2} \lesssim 200\) GeV) or heavy (\(m_{H_2} \gtrsim 500\) GeV), since the production rate is large in the former case and difference in \(E^{\text {miss}}_T\) distribution is large in the latter case. The future pp collider is not able to resolve the DM spin for \(m_{H_2} \sim [300,400]\) GeV. For FDM and SDM, it will be possible to distinguish for benchmark points with relatively large \(m_{H_2}\). As we have already seen from Fig. 5, the \(E^{\text {miss}}_T\) shapes of FDM and SDM become too similar for \(m_{H_2} \sim 200\) GeV.
To improve the spin discrimination power, the polar angle between two leptons \(\cos ( \theta _{\ell \ell })\) is additionally considered with \(E^{\text {miss}}_T\). We perform the binned log-likelihood test on the two dimensional distribution of these two variables. Figure 8 gives the two dimensional distribution of \(E^{\text {miss}}_T\) and \(|\cos (\theta _{\ell \ell })|\) for a weighted sum of SM backgrounds and benchmark points SDM, FDM500 and VDM500. Note that the distribution of \(\cos (\theta _{\ell \ell })\) is an even function, so its absolute value has been used in the histograms with five bins to maintain sufficient statistics.
The binned likelihood are defined with two dimensional bins
where the indexes i and j run over the bins of \(E^{\text {miss}}_T\) and \(|\cos (\theta _{\ell \ell })|\) respectively. The expected p values with respect to the integrated luminosity are plotted in Fig. 9. Comparing to the discrimination with only \(E^{\text {miss}}_T\) distribution, we can find that with the additional information from the angular separation of dilepton, the required integrated luminosities for 95% C.L. probing are reduced by more than half for those benchmark points. The spin discrimination between FDM and VDM is possible at future pp collider for mediator mass either \(\sim 200\) or \(\sim 500\) GeV, where we have assumed the systematic uncertainty can be controlled at \(\sim 0.5\%\) level. And the spin discrimination between FDM and SDM is even better, which can be accomplished with integrated luminosity below \(\sim 30\) ab\(^{-1}\) for all mediator masses given a 0.5% systematic uncertainty.
3.3 Varying the couplings
We here repeat the study of the prospects for discovery and spin discrimination for \(g_\chi =1\) in the FDM model, instead of \(g_\chi =3\) in the previous subsections. The benchmark points in VDM model are chosen such that the decay widths of \(H_2\) are kept the same as the ones in the FDM model assuming negligible \(H_2 \rightarrow H_1 H_1\) partial decay width. In the case of the SDM models, the benchmark points are chosen such that the signal yields after the all selection cuts are kept the same with each of benchmark points in the FDM model by taking appropriate \(\lambda _{HS}\) values.
The signal production cross section for benchmark points of FDM and VDM models are given in Table 3. Comparing with Table II for \(g_\chi =3\), we find that the FDM signal cross sections are almost irrelevant to the coupling \(g_\chi \) for relatively light \(H_2\) (\(m_{H_2} \sim 200\) GeV). This is because the signal is dominated by the on-shell \(H_2\) production which mostly decays into DM pair. It should be noted that VDM will typically have lager cross section when \(H_2\) is lighter and have smaller cross section when the \(H_2\) is heavier than the FDM.
Since all of our benchmark points are characterized by similar energy scale and kinematic features, we adopt the same analysis as has been proposed in Sect. 3.1 to the benchmark points with \(g_\chi =1\): (1) preselection with exactly two opposite sign leptons and at least one b-jet; (2) \(m_{\ell \ell } \notin [85,95]\) GeV; (3) \(E^{\text {miss}}_T > 150\) GeV; (4) \(m_{T_2}(\ell ,\ell ) >150\) GeV. The shapes of the \(E^{\text {miss}}_T\) distributions after above selection requirements are used in the binned log-likelihood analysis to calculate the p value for each benchmark point with respect to varying integrated luminosity. The discovery prospects are provided in Fig. 10. The search sensitivity is improved for benchmark points with larger production cross section. Overall, all benchmark points of \(g_\chi =1\) should be detectable with an integrated luminosity below \(\sim 3000\) fb\(^{-1}\), assuming the systematic uncertainty \(\lesssim 1\%\). Comparing to the Fig. 6, the change of prospects due to the choice of \(g_\chi \) values is visible when the \(H_2\) is relatively heavy (\(m_{H_2}\gtrsim 400\) GeV), where the DM production through off-shell \(H_2\) contribution is dominant.
Finally, we consider the spin discrimination for those benchmark points with \(g_\chi =1\). As before, the two dimensional binned log-likelihood test is performed on the distributions in the \(E^{\text {miss}}_T\) and \(|\cos (\theta _{\ell \ell })|\) plane. The resulting p values for each case are plotted in Fig. 11, where we also consider the case with systematic uncertainty of \(0.5\%\). For the \(g_\chi =1\) case, distinguishing between FDM and VDM will be very difficult, especially when \(H_2\) is heavier. Because the on-shell \(H_2\) production becomes dominant for a small coupling as well as the signal production rate gets smaller for heavier \(H_2\). We conclude that the spin discrimination is only possible when \(m_{H_2} \lesssim 300\) GeV. The discrimination of FDM and SDM is relatively easier due to the intrinsic difference that FDM model has two scalar mediators while SDM model only has one. It will be possible to distinguish FDM from SDM with integrated luminosity below \(\sim 15\) ab\(^{-1}\) for all benchmark points.
4 DM phenomenology in the Higgs portal DM models and their extensions
4.1 DM phenomenology of the benchmark points
Let us briefly discuss the DM phenomenology of our benchmark points, especially the DM relic density and direct detection constraints. We first write the complete model Lagrangains [26] with FeynRule and produce the CalcHEP/CompHEP [52] model files. The model files are used by micrOMEGAs [53] to calculate the relic density and direct detection for each benchmark point. The results (\(g_\chi =3\) case) are presented in Table 4. According to our choices of benchmark points, the DM particles dominantly annihilate into \(WW^{(*)}\) through scalar mediator(s) in the early universe for any DM spin. The DM relic density for all benchmark points are below the measurement (\(\Omega h^2_0=0.1198\)) [4]. For FDM case, because the DM annihilation is p-wave suppressed, its relic density is larger than that of SDM and VDM. Comparing the rescaled DM nucleon scattering cross section (by a factor of \(\frac{\Omega h^2}{0.1198}\)) and the LUX constraints [54], we would conclude that all of our benchmark points should have already been excluded by the direct detection experiment.
However, there are several ways to evade this issue. On one hand, the direct detection limits depend on assumptions about the local dark matter density and DM velocity distributions, which are expected to vary from the standard assumptions used in the experimental analyses [55,56,57,58]. Furthermore, the direct detection cross section depends on hadronic matrix elements which also have considerable uncertainties [59, 60]. On the other hand, the \(E^{\text {miss}}_T\) signatures at colliders could be generated not by the real DM candidate that is responsible for the DM relic density of the universe, but by some heavier dark states that can either decay or annihilate into the proper DM candidate of the universe. Then the stringent DM direct detection constraints would not be applicable to these heavier dark states. In the following, we provide two possible scenarios which have correct relic density and evade the DM direction detection, while keeping the collider phenomenology almost the same as the benchmark points for the FDM case. The direct detection problem for VDM and SDM models can be solved in a similar way.
If we choose smaller \(g_\chi \sin \alpha \) and \(m_\chi > m_{H_1}, m_{H_2}\), there is ample parameter space where FDM models provide thermal DM without violating stringent constraints from the direct detection experiments. However, in this case the production cross section at high energy collider becomes too small, and probably it is outside the reach of a future collider.
4.2 Towards more complicated cases : Higgs portals to excited dark states
In a generalized case, the DM sector consists of two DM particles \(\chi _1\) and \(\chi _2\), where we assume \(m_{\chi _2} > m_{\chi _1}\). The complete model Lagrangian is given as [61]
where we have introduced an extra \(U(1)_D\) dark gauge group with dark photon \(V_\mu \); S is an SM singlet complex scalar with nonzero \(U(1)_D\) charge.Footnote 5 In the scalar potential V(H, S), S can develop a vacuum expectation value (VEV) providing the (additional) masses for the dark photon (two dark fermions). Also, it can mix with the SM Higgs (H) boson giving rise to a possible collider detection of the fermionic DM sector.
In order to produce the benchmark points in the model, we require \(y_2=g_\chi \), \(m_{\chi _2} =80\) GeV, \(m_S=\{ 200,~300,~400, 500 \}\) GeV and the scalar mixing angle \(\sin \alpha =0.3\). The model with this parameter setup will generate exactly the same collider signals as discussed before. On the other hand, since \(m_{\chi _2} > m_{\chi _1}\), \(\chi _2\) can annihilate into \(\chi _1\) while the reverse is not true at low temperature. Moreover, there could be decay channels \(\chi _2 \rightarrow \chi _1 \gamma _D\), and \(\chi _2 \rightarrow \chi _1 S^*(\rightarrow \chi _1 \chi _1)\). All those facts wash out the existence of the \(\chi _2\) particles since the very early stage of the universe while \(\chi _2\) can be copiously produced at hadron collider and leave the detector as missing transverse energy.
\(\chi _1\) particles are responsible for the relic density and astrophysics evidences of DM. In the early universe, \(\chi _1\) pair can dominantly annihilate into two dark photons through t-channel process. Meanwhile, the DM direct detection constraints can be easily evaded as long as the \(y_1\) coupling is sufficiently small. More details will be presented elsewhere [61].
4.3 Pseudoscalar mediator mixing with the SM Higgs
Another simple scenario to evade the stringent DM direct detection constraints is to change the coupling form between the mediator and the DM particle, e.g., use the pseudoscalar coupling. The DM phenomenology and the collider phenomenology of the minimal FDM model with a pseudoscalar coupling have been studied for the following interaction Lagrangian [62]:
where \(H_0\) plays the role of SM Higgs and A is the SM singlet scalar.
In this model, the matrix element of the DM-nucleon scattering is proportional to the DM velocity
which leads to \(v^2 \sim 10^{-6}\) suppression in the DM-nucleon scattering cross section:
where
with N denoting nucleon and \(f_N \approx 0.28\) [63,64,65,66]. In contrast, the s-wave DM annihilation is still permitted which requires the DM relic density of our benchmark points to be below the observation. This means that the DM considered in this example only constitutes a fraction of the total amount of DM sector.
By changing the coupling from scalar to pseudoscalar, the main kinematic features of the signal at hadron collider is unaltered. But it is still possible to distinguish between those two scenarios with similar technique as adopted for spin discrimination. We can write the differential cross section of DM production as (Appendix A)
Comparing to Eq. 2.5, we can find the weight factor to be \((2t-8m^2_\chi )\) for scalar and 2t for pseudoscalar. Because \(\frac{2t_2-8m^2_\chi }{2t_1-8m^2_\chi } > \frac{2t_2}{2t_1}\) for \(t_2>t_1\), we expect that the \(m_{\chi \chi }\) spectrum in scalar mediator model will be harder than that in pseudoscalar model.
To demonstrate the argument, we choose four benchmark points in the pseudoscalar mediator FDM model, denoted by FDMSA200, FDMSA300, FDMSA400 and FDMSA500 corresponding to those of FDM. Here the S/A indicates that, in this model, the mediator couples to SM fermions/DM with scalar/pseudoscalar coupling. The coupling \(g_\chi ^A\) for each benchmark point is chosen such that the decay width of A is the same as \(H_2\) of the corresponding benchmark point in FDM models. The \(m_{\chi \chi }\) distributions for all benchmark points are plotted in the left panel of Fig. 12. It can be clearly seen that the spectra of FDMSA is softer. This feature is inherited by the two lepton angular separation as a physical observable. The distributions of polar angle difference between the two leptons for those benchmark point are provided in the right panel of the figure. Events with lager \(m_{\chi \chi }\) will have larger angular separation between two leptons.
Again, we adopt the same analysis strategy as in Sect. 3 to study the discovery and discriminating (from FDM) prospects of the FDMSA model. The shape information of \(E^{\text {miss}}_T\) distribution has been used in signal probing. The p value with respect to the integrated luminosity for each FDMSA benchmark point is plotted in the left panel of Fig. 13. Similar to the FDM case, all benchmark points are probeable at 95% C.L. for integrated luminosity below \(\sim 500\) fb\(^{-1}\) given a 1% systematic uncertainty. In order to discriminate the FDM benchmark points from those of FDMSA, both the shapes of \(E^{\text {miss}}_T\) and \(\cos (\theta _{\ell \ell })\) are taking into account. The two dimensional binned log-likelihood analysis shows that the discrimination can be made with an integrated luminosity of around 15 ab\(^{-1}\) for all benchmark points if the systematic uncertainty can be controlled at 0.5% level.
5 Summary
In this paper, we have investigated prospects of the DM discovery and its spin discrimination at a 100 TeV pp collider for the Higgs portal DM models and their extensions with the \(t\bar{t}+\)DM associated production in the dileptonic channel. Kinematic variable of dilepton invariant mass \(m_{\ell \ell }\), missing transverse energy \(E^{\text {miss}}_T\) and stransverse mass of the two leptons \(m_{T_2} (\ell , \ell )\) are used in our cut-and-count analysis for the first stage of signal and background discrimination. Especially, the \(m_{T_2} (\ell , \ell )\) is found to be useful in suppressing the SM \(t\bar{t}\) background. The shape information of the \(E^{\text {miss}}_T\) is used further by one dimensional binned log-likelihood test to estimate the signal discovery prospects. We find that our benchmark points can be probed at a future pp collider with an integrated luminosity below \(\sim \)1 ab\(^{-1}\), assuming the systematic uncertainty can be controlled at 1% level.
The models with different DM spins are predicting different distributions in the variable \(t\equiv m_{DD}^2\). Even though the t variable itself is not an observable at hadron collider, its feature can be reflected in the angular separation between recoiling two top quarks. We adopt a two dimensional binned log-likelihood analysis on the distributions of missing transverse energy and two leptons (from top quark decay) polar angle difference for different signals plus backgrounds for the DM spin discrimination. Our study shows that the DM spin discrimination is possible at a future 100 TeV collider with an integrated luminosity below a few \(\mathcal {O}(10)\) ab\(^{-1}\) for most cases if the systematic uncertainty can be controlled at \(\sim 0.5\%\) level. By applying the same analysis to more general cases with smaller couplings (\(g_\chi =1\)), our findings do not change much except that the DM spin discrimination become very difficult when the coupling is small and the mediator (\(H_2\)) is heavy.
Finally, we discuss the DM phenomenology of our benchmark points, where relic densities are well below the measurement and which are challenged by DM direct detection experiments. Two possible solutions are proposed to avoid these issues: (1) extending the DM sector where the DM particle of interest at collider is not the same as the DM particle from astrophysics observation; (2) modifying the DM coupling such that the non-relativistic DM-nucleon scattering is suppressed, i.e. using pseudoscalar coupling between the DM and the mediator. Discrimination between the scalar and the pseudoscalar couplings is shown to be quite promising at a future 100 TeV pp collider.
Notes
If \(H_2 \rightarrow H_1 H_1\) contributes significantly to the \(H_2\) decay width, the cross section of DM signal gets smaller. But \(H_2\) decay width gets wider, which could improve the DM spin discrimination as discussed in this paper.
We expect to get similar results with CMS configuration card.
We find requiring two b-jets reduces both signal and backgrounds by a factor around 1 / 3.
The \(\chi _{1,2}\) in the Lagrangian are not mass eigenstates if S develops VEV. We will not distinguish between mass eigenstates and gauge eigenstate in our discussion for simplicity.
References
E. Corbelli, P. Salucci, The extended rotation curve and the dark matter halo of M33. Mon. Not. R. Astron. Soc. 311, 441–447 (2000). arXiv:astro-ph/9909252
D. Clowe, A. Gonzalez, M. Markevitch, Weak lensing mass reconstruction of the interacting cluster 1E0657-558: direct evidence for the existence of dark matter. Astrophys. J. 604, 596–603 (2004). arXiv:astro-ph/0312273
C.L. Bennett, D. Larson, J.L. Weiland, N. Jarosik, G. Hinshaw, N. Odegard, K.M. Smith, R.S. Hill, B. Gold, M. Halpern, E. Komatsu, M.R. Nolta, L. Page, D.N. Spergel, E. Wollack, J. Dunkley, A. Kogut, M. Limon, S.S. Meyer, G.S. Tucker, E.L. Wright, Nine-year wilkinson microwave anisotropy probe (wmap) observations: final maps and results. Astrophys. J. Suppl. Ser. 208(2), 20 (2013)
Planck Collaboration, P.A.R. Ade et al., Planck 2015 results. XIII. Cosmological parameters. Astron. Astrophys. 594, A13 (2016). arXiv:1502.01589
T. Daylan, D.P. Finkbeiner, D. Hooper, T. Linden, S.K.N. Portillo, N.L. Rodd, T.R. Slatyer, The characterization of the gamma-ray signal from the central Milky Way: a case for annihilating dark matter. Phys. Dark Univ. 12, 1–23 (2016). arXiv:1402.6703
AMS Collaboration, M. Aguilar et al., Antiproton flux, antiproton-to-proton flux ratio, and properties of elementary particle fluxes in primary cosmic rays measured with the alpha magnetic spectrometer on the international space station. Phys. Rev. Lett. 117(9), 091103 (2016)
DAMPE Collaboration, G. Ambrosi et al., Direct detection of a break in the teraelectronvolt cosmic-ray spectrum of electrons and positrons. arXiv:1711.10981
U. Haisch, A. Hibbs, E. Re, Determining the structure of dark-matter couplings at the LHC. Phys. Rev. D 89, 034009 (2014). arXiv:1311.7131
U. Haisch, P. Pani, G. Polesello, Determining the CP nature of spin-0 mediators in associated production of dark matter and \( t\overline{t} \) pairs. JHEP 02, 131 (2017). arXiv:1611.09841
U. Haisch, F. Kahlhoefer, E. Re, QCD effects in mono-jet searches for dark matter. JHEP 12, 007 (2013). arXiv:1310.4491
M.R. Buckley, D. Feld, D. Goncalves, Scalar simplified models for dark matter. Phys. Rev. D 91, 015017 (2015). arXiv:1410.6497
P. Harris, V.V. Khoze, M. Spannowsky, C. Williams, Constraining dark sectors at colliders: beyond the effective theory approach. Phys. Rev. D 91, 055009 (2015). arXiv:1411.0535
U. Haisch, E. Re, Simplified dark matter top-quark interactions at the LHC. JHEP 06, 078 (2015). arXiv:1503.00691
M. Backović, M. Krämer, F. Maltoni, A. Martini, K. Mawatari, M. Pellen, Higher-order QCD predictions for dark matter production at the LHC in simplified models with s-channel mediators. Eur. Phys. J. C 75(10), 482 (2015). arXiv:1508.05327
M.R. Buckley, D. Goncalves, Constraining the strength and CP structure of dark production at the LHC: the associated top-pair channel. Phys. Rev. D 93(3), 034003 (2016). arXiv:1511.06451
R.C. Cotta, J.L. Hewett, M.P. Le, T.G. Rizzo, Bounds on dark matter interactions with electroweak gauge bosons. Phys. Rev. D 88, 116009 (2013). arXiv:1210.0525
A. Crivellin, U. Haisch, A. Hibbs, LHC constraints on gauge boson couplings to dark matter. Phys. Rev. D 91, 074028 (2015). arXiv:1501.00907
A. Belyaev, L. Panizzi, A. Pukhov, M. Thomas, Dark matter characterization at the LHC in the effective field theory approach. JHEP 04, 110 (2017). arXiv:1610.07545
O. Buchmueller, M.J. Dolan, C. McCabe, Beyond effective field theory for dark matter searches at the LHC. JHEP 01, 025 (2014). arXiv:1308.6799
G. Busoni, A. De Simone, E. Morgante, A. Riotto, On the validity of the effective field theory for dark matter searches at the LHC. Phys. Lett. B 728, 412–421 (2014). arXiv:1307.2253
G. Busoni, A. De Simone, J. Gramling, E. Morgante, A. Riotto, On the validity of the effective field theory for dark matter searches at the LHC, part II: complete analysis for the \(s\)-channel. JCAP 1406, 060 (2014). arXiv:1402.1275
G. Busoni, A. De Simone, T. Jacques, E. Morgante, A. Riotto, On the validity of the effective field theory for dark matter searches at the LHC part III: analysis for the \(t\)-channel. JCAP 1409, 022 (2014). arXiv:1405.3101
S. Baek, P. Ko, M. Park, W.-I. Park, C. Yu, Beyond the dark matter effective field theory and a simplified model approach at colliders. Phys. Lett. B 756, 289–294 (2016). arXiv:1506.06556
G. Arcadi, M. Dutra, P. Ghosh, M. Lindner, Y. Mambrini, M. Pierre, S. Profumo, F.S. Queiroz, The waning of the WIMP? A review of models, searches, and constraints. arXiv:1703.07364
P. Ko, H. Yokoya, Search for Higgs portal DM at the ILC. JHEP 08, 109 (2016). arXiv:1603.04737
T. Kamon, P. Ko, J. Li, Characterizing Higgs portal dark matter models at the ILC. Eur. Phys. J. C 77(9), 652 (2017). arXiv:1705.02149
R.M. Capdevilla, A. Delgado, A. Martin, N. Raj, Characterizing dark matter at the LHC in Drell–Yan events. arXiv:1709.00439
K.J. Bae, T.H. Jung, M. Park, Spectral decomposition of missing transverse energy at Hadron colliders. Phys. Rev. Lett. 119(26), 261801 (2017). arXiv:1706.04512
S. Baum, R. Catena, J. Conrad, K. Freese, M.B. Krauss, Determining dark matter properties with a XENONnT/LZ signal and LHC-Run3 mono-jet searches. arXiv:1709.06051
P. Ko, J. Li, Interference effects of two scalar boson propagators on the LHC search for the singlet fermion DM. Phys. Lett. B 765, 53–61 (2017). arXiv:1610.03997
M.L. Mangano et al., Physics at a 100 TeV pp collider: standard model processes. CERN Yellow Rep. 3, 1–254 (2017). arXiv:1607.01831
J. Tang et al., Concept for a future super proton–proton collider. arXiv:1507.03224
F. Zimmermann, M. Benedikt, X. Buffat, D. Schulte, Luminosity targets for FCC-hh. In: Proceedings of 7th International Particle Accelerator Conference (IPAC 2016), Busan, p. TUPMW037 (2016)
CMS Collaboration, A.M. Sirunyan et al., Search for dark matter produced with an energetic jet or a hadronically decaying W or Z boson at \( \sqrt{s}=13 \) TeV. JHEP 07, 014 (2017). arXiv:1703.01651
CMS Collaboration, A.M. Sirunyan et al., Search for top squarks and dark matter particles in opposite-charge dilepton final states at \(\sqrt{s}=\) 13 TeV. arXiv:1711.00752
S. Baek, P. Ko, W.-I. Park, Search for the Higgs portal to a singlet fermionic dark matter at the LHC. JHEP 02, 047 (2012). arXiv:1112.1847
S. Baek, P. Ko, W.-I. Park, E. Senaha, Higgs portal vector dark matter: revisited. JHEP 05, 036 (2013). arXiv:1212.2131
J. Alwall, R. Frederix, S. Frixione, V. Hirschi, F. Maltoni, O. Mattelaer, H.S. Shao, T. Stelzer, P. Torrielli, M. Zaro, The automated computation of tree-level and next-to-leading order differential cross sections, and their matching to parton shower simulations. JHEP 07, 079 (2014). arXiv:1405.0301
V. Hirschi, O. Mattelaer, Automated event generation for loop-induced processes. JHEP 10, 146 (2015). arXiv:1507.00020
A. Alloul, N.D. Christensen, C. Degrande, C. Duhr, B. Fuks, FeynRules 2.0—a complete toolbox for tree-level phenomenology. Comput. Phys. Commun. 185, 2250–2300 (2014). arXiv:1310.1921
C. Degrande, Automatic evaluation of UV and R2 terms for beyond the Standard Model Lagrangians: a proof-of-principle. Comput. Phys. Commun. 197, 239–262 (2015). arXiv:1406.3030
P. Artoisenet, R. Frederix, O. Mattelaer, R. Rietkerk, Automatic spin-entangled decays of heavy resonances in Monte Carlo simulations. JHEP 03, 015 (2013). arXiv:1212.3460
T. Sjostrand, S. Mrenna, P.Z. Skands, A. Brief, Introduction to PYTHIA 8.1. Comput. Phys. Commun. 178, 852–867 (2008). arXiv:0710.3820
M. Cacciari, G.P. Salam, G. Soyez, FastJet User Manual. Eur. Phys. J. C 72, 1896 (2012). arXiv:1111.6097
DELPHES 3 Collaboration, J. de Favereau, C. Delaere, P. Demin, A. Giammanco, V. Lemaitre, A. Mertens, M. Selvaggi, DELPHES 3, a modular framework for fast simulation of a generic collider experiment. JHEP 02, 057 (2014). arXiv:1307.6346
ATLAS Collaboration, G. Aad et al., Search for dark matter in events with heavy quarks and missing transverse momentum in \(pp\) collisions with the ATLAS detector. Eur. Phys. J. C 75(2), 92 (2015). arXiv:1410.4031
C.G. Lester, B. Nachman, Bisection-based asymmetric M\(\_{T2}\) computation: a higher precision calculator than existing symmetric methods. JHEP 03, 100 (2015). arXiv:1411.4312
M. Low, L.-T. Wang, Neutralino dark matter at 14 TeV and 100 TeV. JHEP 08, 161 (2014). arXiv:1404.0682
V.V. Khoze, G. Ro, M. Spannowsky, Spectroscopy of scalar mediators to dark matter at the LHC and at 100 TeV. Phys. Rev. D 92(7), 075006 (2015). arXiv:1505.03019
Sensitivity to WIMP dark matter in the final states containing jets and missing transverse momentum with the ATLAS detector at 14 TeV LHC, Tech. Rep. ATL-PHYS-PUB-2014-007. CERN, Geneva (2014)
M. Mangano, Physics at the FCC-hh, a 100 TeV pp collider. arXiv:1710.06353
A. Belyaev, N.D. Christensen, A. Pukhov, CalcHEP 3.4 for collider physics within and beyond the Standard Model. Comput. Phys. Commun. 184, 1729–1769 (2013). arXiv:1207.6082
G. Belanger, F. Boudjema, A. Pukhov, A. Semenov, Dark matter direct detection rate in a generic model with micrOMEGAs 2.2. Comput. Phys. Commun. 180, 747–767 (2009). arXiv:0803.2360
LUX Collaboration, D.S. Akerib et al., Results from a search for dark matter in the complete LUX exposure. Phys. Rev. Lett. 118(2), 021303 (2017). arXiv:1608.07648
M. Kuhlen, N. Weiner, J. Diemand, P. Madau, B. Moore, D. Potter, J. Stadel, M. Zemp, Dark matter direct detection with non-Maxwellian velocity structure. JCAP 1002, 030 (2010). arXiv:0912.2358
M. Lisanti, L.E. Strigari, J.G. Wacker, R.H. Wechsler, The dark matter at the end of the galaxy. Phys. Rev. D 83, 023519 (2011). arXiv:1010.4300
Y.-Y. Mao, L.E. Strigari, R.H. Wechsler, Connecting direct dark matter detection experiments to cosmologically motivated halo models. Phys. Rev. D 89(6), 063513 (2014). arXiv:1304.6401
M. Kuhlen, A. Pillepich, J. Guedes, P. Madau, The distribution of dark matter in the Milky Way’s disk. Astrophys. J. 784, 161 (2014). arXiv:1308.1703
E. Accomando, R.L. Arnowitt, B. Dutta, Y. Santoso, Neutralino proton cross-sections in supergravity models. Nucl. Phys. B 585, 124–142 (2000). hep-ph/0001019
J.R. Ellis, K.A. Olive, Y. Santoso, V.C. Spanos, Update on the direct detection of supersymmetric dark matter. Phys. Rev. D 71, 095007 (2005). arXiv:hep-ph/0502001
S. Baek, P. Ko, J. Li, W.-I. Park, Paper in preparation
S. Baek, P. Ko, J. Li, Minimal renormalizable simplified dark matter model with a pseudoscalar mediator. Phys. Rev. D 95(7), 075011 (2017). arXiv:1701.04131
R.D. Young, A.W. Thomas, Octet baryon masses and sigma terms from an SU(3) chiral extrapolation. Phys. Rev. D 81, 014503 (2010). arXiv:0901.3310
JLQCD Collaboration, H. Ohki, K. Takeda, S. Aoki, S. Hashimoto, T. Kaneko, H. Matsufuru, J. Noaki, T. Onogi, Nucleon strange quark content from \(N\_f=2+1\) lattice QCD with exact chiral symmetry. Phys. Rev. D 87, 034509, (2013). arXiv:1208.4185
J.M. Alarcon, J. Martin Camalich, J.A. Oller, The chiral representation of the \(\pi N\) scattering amplitude and the pion-nucleon sigma term. Phys. Rev. D 85, 051503 (2012). arXiv:1110.3797
J.M. Alarcon, L.S. Geng, J. Martin Camalich, J.A. Oller, The strangeness content of the nucleon from effective field theory and phenomenology. Phys. Lett. B 730, 342–346 (2014). arXiv:1209.2870
Acknowledgements
We are grateful to Tathagata Ghosh for discussions on the related issues. This work is supported in part by National Research Foundation of Korea (NRF) Research Grant NRF-2015R1A2A1A05001869 (PK, JL), by the NRF Grant funded by the Korea government (MSIP) (No. 2009-0083526) through Korea Neutrino Research Center at Seoul National University (PK), by DOE Grant DE-SC0010813 (BD, TK) and by Qatar National Research Fund under project NPRP 9-328-1-066 (TK).
Author information
Authors and Affiliations
Corresponding author
Appendix A: Matrix element calculation
Appendix A: Matrix element calculation
In this appendix, we calculate the spin summed matrix element square for each case that is discussed in current work.
1.1 1. Fermion DM with scalar interaction
Assuming the mediator is propagating along the \(z-\)axis without loss of generality, the wave function for the outgoing DM and anti-DM are given by:
where \(\omega _{\pm } = \sqrt{E \pm |\vec {p}|}\); p and q are the four momentum of DM and anti-DM respectively. The spin summed matrix element square is
If one take the DM momenta in the rest frame of the mediator with mass given by \(\sqrt{t}=m_{DD}\):
we can obtain
1.2 2. Fermion DM with pseudoscalar interaction
The wave functions for DM and anti-DM are the same as in Eqs. A.1–A.4. The matrix element square is
1.3 3. Vector DM with scalar interaction
Assuming the mediator is propagating along \(z-\)axis, and two VDM momenta are
the three independent polarization vectors can be written as
As a result, the matrix element square with all DM polarization summed over is given by
Rights and permissions
Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.
Funded by SCOAP3
About this article
Cite this article
Dutta, B., Kamon, T., Ko, P. et al. Prospects for discovery and spin discrimination of dark matter in Higgs portal DM models and their extensions at 100 TeV pp collider . Eur. Phys. J. C 78, 595 (2018). https://doi.org/10.1140/epjc/s10052-018-6071-y
Received:
Accepted:
Published:
DOI: https://doi.org/10.1140/epjc/s10052-018-6071-y