Abstract
In the course of development of navigation systems for small-sized highly maneuverable vehicles their sensors should be subjected to mechanical tests, because the sensor certificates usually omit information on their mechanical resistance. The paper presents the main results from Russian IMU AIST-350T mechanical tests: shock tests, sinusoidal and broadband random vibration.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
http://www.atlanticinertial.com/uploads/pdfs/4232-SiIMU02low.pdf
Habibi, S., Gun Hard Inertial Measurement Unit based on MEMS capacitive accelerometer and rate sensor, http://www.colibrys.com.
GOST 16504-81: The State System of Testing Products. Product Test and Quality Inspection. General Terms and Definitions, 2003.
Mezentsev, A.P. et al., Medium-accuracy INS AIST-320 with Coriolis vibratory gyro AIST-100. Design philosophy and development, production, test results, Giroskopiya i Navigatsiya, 2007, no. 3(58), pp. 3–19.
GOST 15150-69: Machines, Instruments and Other Industrial Products. Modifications for Different Climatic Regions. Categories, Operating, Storage and Transportation Conditions as to Environment Climatic Aspects Influence, 2006.
GOST 28203-89: Basic Environmental Testing Procedures. Part 2. Tests. Tests Fc and Guidance: Vibration (Sinusoidal), 2006.
GOST 24346-80: Vibration. Terms and Definitions, 1980.
GOST 26883-86: Exposure Factors. Terms and Definitions, 1992.
GOST 30630.0.0-99: Environment Stability Test Methods for machines, Instruments and Other Industrial Products. General Requirements, 2000.
GOST 28231-89: Basic Environmental Testing Procedures. Part 2. Tests. Mounting of Components, Equipment and Other Articles for Dynamic Tests Including Shock (Ea), Bump (Eb), Vibration (Fc and Fd), Steady-State Acceleration (Ga) and Guidance, 2006.
GOST 30630.1.2-99: Mechanical Environment Stability Test Methods for Machines, Instruments and Other Industrial Products. Tests for Influence of Vibration, 2000.
GOST 28220-89: Basic Environmental Testing Procedures. Part 2. Test Fd: Broadband Random Vibration. General Requirements, 2006.
GOST R 51371-99: Mechanical Environment Stability Test Methods for Machines, Instruments and Technical Products. Tests for Influence of Shocks, 1995.
Konovalov, S.F., Teoriya vibroustoichivosti akselerometrov (Theory of Accelerometer Vibration Resistsnce), Moscow: Mashinostroenie, 1991.
Evstifeev, M.I. and Chelpanov, I.B., Improving mechanical performance of MEMS gyros, Gyroscopy and Navigation, 2013, vol. 4, no. 3, pp. 174–180.
AlaVar 5.2. URL: http://www.alamath.com
Device AIST-350. Certificate SVMK.402132.006 PS. Version 1-2010.
Author information
Authors and Affiliations
Corresponding author
Additional information
Published in Russian in Giroskopiya i Navigatsiya, 2013, No. 4, pp. 84–93.
Rights and permissions
About this article
Cite this article
Bogdanov, M.B. Inertial measurement unit AIST-350T: Results of mechanical investigation tests. Gyroscopy Navig. 5, 238–244 (2014). https://doi.org/10.1134/S2075108714040117
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S2075108714040117