Abstract
The state-of-the-art in the field of polymeric materials that can degrade under environmental conditions into environmentally harmless compounds is reviewed. It is shown that the most efficient method for the production of such materials involves the creation of composites based on synthetic and natural polymers, in particular polysaccharides. Studies performed at the Semenov Institute of Chemical Physics, Russian Academy of Sciences, have demonstrated that biodegradable composites consisting of various polysaccharides with LDPE and polylactide may be obtained by an ecologically pure solid-phase method under the action of high-temperature shear deformation.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
A. K. Mohanty, M. Misra, and G. Hinrichsen, Macromol. Mater. Eng. 276/277, 1 (2000).
L. Yu, K. Dean, and L. Li, Prog. Polym. Sci. 31, 576 (2006).
V. A. Vasnev, Vysokomol. Soedin., Ser. B 39 (12), 2073 (1997).
St. Moore, Mod. Plast. Int. 29 (5), 38 (1999).
L. P. Schreiber, Technica (Suisse), No. 25, 20 (1995).
I. S. Arvanitoyannis, J. Macromol. Sci., Polym. Rev. 39, 205 (1999).
J.-M. Raquez, R. Narayan, and P. Dubois, Macromol. Mater. Eng. 293 (6), 447 (2008).
R. G. Sinclair, J. Macromol. Sci., Part A: Pure Appl. Chem. 33 (5), 703 (1996).
D. Hunkeler, Polym. News 23 (3), 93 (1998).
M. Kotny, M. Sancelme, C. Dabin, N. Pichon, A.-M. Delort, and J. Lemaire, Polym. Degrad. Stab. 91, 1495 (2006).
RF Patent No. 94023952 (1997).
T. Mekonnen, P. Mussone, H. Khalil, and D. Bressler, J. Mater. Chem. A 1, 13379 (2013).
R. Rasal, A. Janorkar, and D. Hirt, Prog. Polym. Sci. 35, 338 (2010).
L. Yu and L. Chen, in Biodegradable Polymer Blends and Composites from Renewable Resources, Ed. by L. Yu (Wiley, New Jersey, 2009), p. 1.
J. Soulestin, K. Prashantha, M. F. Lacrampe, and P. Krawczak, in Handbook of Bioplastics and Biocomposites Engineering Application, Ed. by S. Pilla (Wiley Scrivener Publ, New Jersey, 2011), Part II, p. 77.
M. H. Naitove, Plast. Technol. 41 (3), 15 (1995).
R. G. Sinclair, J. Macromol. Sci., Part A: Pure Appl. Chem. 33 (5), 585 (1996).
G. O. Chen, in Biodegradable Polymers and Plastics, Ed. by E. Chiellini and R. Solaro (Kluwer Academic/Plenum, New York, 2003), p. 155.
PL Patent No. 173504 (1998).
S. Writer, Technol. Jpn. 28 (4), 10 (1995).
B. H. Chang, Polym. News 22 (9), 307 (1997).
US Patent No. 5763518 (1998).
Biodegradable Polymers. http://otherreferats.allbest.ru/chemistry/00367015_0.html.Cited February 13, 2014.
N. S. Enikolopian, Makromol. Chem., Suppl., No. 8, 1109 (1984).
E. L. Akopyan, A. Yu. Karmilov, V. G. Nikol’skii, A. M. Khachatryan, and N. S. Enikolopyan, Dokl. Akad. Nauk SSSR 291 (1), 133 (1986).
E. V. Prut and A. N. Zelenetskii, Russ. Chem. Rev. 70 (1), 65 (2001).
G. J. L. Griffin, Adv. Chem. Ser. 134, 159 (1974).
DE Patent No. 2322440 (1974).
DE Patent No. 2455732 (1975).
F. H. Othey, R. P. Westhoff, and Ch. R. Russel, Ind. Eng. Chem. 16, 305 (1977).
A. I. Suvorova, I. S. Tyukova, and E. I. Trufanova, Russ. Chem. Rev. 69 (5), 451 (2000).
JPN Patent No. 2741476 (1998).
DE Patent No. 19721460 (1998).
DE Patent No. 19633474 (1998).
JPN Patent No. 2749918 (1998).
JPN Patent No. 813470 (1998).
US Patent No. 5459258 (1995).
JPN Patent No. 2739775 (1998).
H. Schmidt, Allg. Pap.-Rudsch. 120 (1), 354 (1996).
DE Patent No. 19633476 (1998).
DE Patent No. 19705376 (1998).
R. L. Shorgen, J. W. Lawton, K. F. Tiefenbacher, and L. Chen, J. Appl. Polym. Sci. 68 (13), 2129 (1998).
US Patent No. 5422387 (1995).
US Patent No. 5393804 (1995).
US Patent No. 5384187 (1995).
J. F. Masson and R. St.-J. Manley, Macromolecules 24 (22), 5914 (1991).
N. Nishioka, M. Yamoaka, H. Haneda, K. Kawakami, and M. Uno, Macromolecules 26 (17), 4694 (1993).
A. Y. Jolan and R. E. Prudhomme, J. Appl. Polym. Sci. 22 (9), 2533 (1978).
DE Patent No. 4404840 (1996).
CH Patent No. 688856 (1998).
US Patent No. 5580911 (1996).
WO Patent No. 9806785 (1998).
T. P. Ustinova, S. E. Artemenko, and M. Yu. Morozova, Fibre Chem. 30, 226 (1998).
A. A. Ol’khov, L. S. Shibryaeva, A. L. Iordanskii, S. V. Vlasov, and S. A. Loginova, Plast. Massy, No. 4, 19 (2000).
V. R. Mukhina, N. V. Pastukhov, Yu. D. Semchikov, L. Smirnova, K. V. Kir’yanov, and M. N. Zhernenkov, Polym. Sci., Ser. A 43 (10), 1797 (2001).
W. Y. Chuang, T. H. Young, C. H. Yao, and W. Y. Chiu, Biomaterials 20, 1479 (1999).
M. Mucha, React. Funct. Polym. 38, 19 (1998).
W. Zhao, L. Yu, Y. Zhang, and J. Sun, J. Macromol. Sci., Part B: Phys. 34 (3), 231 (1995).
E. P. Ageev, S. L. Kotova, E. E. Skorikova, and A. B. Zezin, Vysokomol. Soedin., Ser. A 38 (2), 323 (1996).
E. E. Skorikova, R. I. Kalyuzhnaya, G. A. Vikhoreva, L. S. Gal’braikh, S. L. Kotova, E. P. Ageev, A. B. Zezin, and V. A. Kabanov, Vysokomol. Soedin., Ser. A 38 (1), 61 (1996).
J. Xu, S. P. McCarthy, R. A. Gross, and D. L. Kaplan, Macromolecules 29 (10), 3436 (1996).
M. Nashiyama, Kami Pa Gikyoshi 49 (4), 671 (1995).
JPN Patent No. 459830 (1992).
S. Z. Rogovina, Ch. V. Alexanyan, D. D. Novikov, and E. V. Prut, Polym. Sci., Ser. A 51 (5), 554 (2009).
S. Z. Rogovina, K. V. Aleksanyan, L. V. Kompaniets, and E. V. Prut, Vse Mater. Entsikl. Sprav., No. 8, 28 (2009).
S. Z. Rogovina, Ch. V. Alexanyan, and E. V. Prut, J. Appl. Polym. Sci. 121, 1850 (2011).
S. M. Lomakin, S. Z. Rogovina, A. V. Grachev, E. V. Prut, and Ch. V. Alexanyan, Thermochim. Acta 521, 66 (2011).
S. Z. Rogovina, K. V. Aleksanyan, E. V. Prut, and A. Ya. Gorenberg, Eur. Polym. J. 49, 194 (2013).
N. Ljungberg and B. Wesslein, Biomacromolecules 6, 1789 (2005).
R. G. Sinclair, J. Macromol. Sci., Part A: Pure Appl. Chem. 33 (5), 585 (1996).
US Patent No. 5424346 (1995).
X. Wang, Y. Zhuang, and L. J. Dong, J. Appl. Polym. Sci. 127, 471 (2013).
K. S. Anderson, S. H. Lim, and M. A. Hillmyer, J. Appl. Polym. Sci. 89, 3757 (2003).
Y. Feng, Y. Hu, J. Yin, G. Zhao, and W. Jiang, Polym. Eng. Sci. 53, 389 (2013).
F. Feng and L. Ye, J. Appl. Polym. Sci. 119, 2778 (2011).
N. Bitinis, R. Verdejo, P. Cassagnau, and M. A. Lopez-Manchado, Mater. Chem. Phys. 129, 823 (2011).
M. H. Naitove, Plast. Technol. 41 (3), 15 (1995).
R. Hinterwaldner, Coatings 30 (5), 180 (1997).
A. P. Mathew, K. Oksman, and M. Sain, J. Appl. Polym. Sci. 101, 300 (2006).
K. Oksman, M. Skrifvars, and J. Selin, Compos. Sci. Technol. 63, 1317 (2003).
L. Mascia and M. Xanthos, Adv. Polym. Technol. 11 (4), 237 (1992).
M. S. Thompson, T. P. Vadala, M. L. Vadala, Y. Lin, and J. S. Riffle, Polymer 49 (2), 345 (2008).
C.-H. Kim, D.-W. Kim, and K. Y. Cho, Polym. Bull. 63, 91 (2009).
Y. Hu, M. Pogunova, V. Topolrkaraev, A. Hiltner, and E. Baer, Polymer, No. 44, 5701 (2003).
M. Baiardo, G. Frisoni, M. Scandola, M. Rimelen, D. Lips, K. Ruffieux, and E. Wintermantel, J. Appl. Polym. Sci. 90, 1731 (2003).
F.-J. Li, S.-D. Zhang, J. Z. Liang, and J.-Z. Wang, Polym. Adv. Technol. 26, 465 (2015).
K. Sungssanit, N. Kao, and S. N. Bhattacharya, Polym. Eng. Sci. 52 (1), 2128 (2012).
US Patent No. 5679421 (1997).
US Patent No. 5401778 (1995).
RF Patent No. 97115455 (1999).
US Patent No. 5462983 (1995).
US Patent No. 5665786 (1997).
JPN Patent No. 2742630 (1998).
RF Patent No. 92016573 (1997).
US Patent No. 5444107 (1995).
W. Chin-San, Carbohydr. Polym. 90, 583 (2012).
J. Guan, K. Eskridge, and M. Hanna, Ind. Crops Prod. 22, 109 (2005).
O. Martin and L. Averous, Polymer 42, 6209 (2001)
S. Wong, R. A. Shanks, and A. Hodzic, Polym. Eng. Sci. 43, 1566 (2003).
S. Wong, R. A. Shanks, and A. Hodzic, Macromol. Mater. Eng 289, 447 (2004).
E. K. Gamstedt, K. M. Borgen, R. C. Neagu, L. M. M. Akerho, and M. Lindstrom, J. Thermoplast. Compos. Mater. 19, 613 (2006).
L. Yu, S. Petinakis, K. Dean, A. Bilyk, and D. Wu, Macromol. Symp. 249/250, 535 (2007).
K. Oksman and A. P. Mathew, in Handbook of Green Materials, Ed. by K. Oksman, A. P. Mathew, A. Bismarck, O. Rojas, and M. Sain (World Scientific Publ., Singapore, 2014), Vol. 2, p. 53.
K. Oksman, A. P. Mathew, D. Bondeson, and I. Kvien, Compos. Sci. Technol. 66, 2776 (2006).
A. Natalia, K. Mathew, and K. Oksman, Compos. Sci. Technol 106, 149 (2015).
D. Bondeson and K. Oksman, Composites, Part A 38, 2486 (2007).
L. Petersson, I. Kvien, and K. Oksman, Compos. Sci. Technol. 67, 2535 (2007).
Y. Wu, Y. L. Zheng, W. L. Yang, C. C. Wang, J. H. Hu, and S. K. Fu, Carbohydr. Polym. 59, 165 (2005).
Q. Mu, M. Wang, and Y. Fang, Carbohydr. Polym. 72, 60 (2008).
F. Xie, Q. F. Li, B. Gu, K. Liu, and G. X. Shen, Microsurgery 28 (6), 471 (2008).
M. I. Shtil’man, Polymers of Medical and Biological Use (Akademkniga, Moscow, 2006) [in Russian].
E. S. Nugraha, C. Alan, T. Lan, and C. Veronique, J. Polym. Environ. 12 (1), 1 (2004).
S. Z. Rogovina, K. V. Aleksanyan, A. V. Grachev, A. A. Berlin, and E. V. Prut, Mendeleev Commun. 25 (5), 361 (2015).
S. Z. Rogovina, K. V. Aleksanyan, A. V. Grachev, A. Ya. Gorenberg, A. A. Berlin, and E. V. Prut, in Additives in Polymers. Analysis and Applications, Ed. by A. A. Berlin, S. Z. Rogovina, and G. E. Zaikov (Apple Acad. Press, Waretown, USA, 2015).
S. Z. Rogovina, K. V. Aleksanyan, A. Ya. Gorenberg, Yu. I. Deryabina, E. P. Isakova, E. V. Prut, and A. A. Berlin, Khim. Rast. Syr’ya, No. 1, 29 (2015).
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © S.Z. Rogovina, 2016, published in Vysokomolekulyarnye Soedineniya, Ser. C, 2016, Vol. 58, No. 1, pp. 68–80.
Rights and permissions
About this article
Cite this article
Rogovina, S.Z. Biodegradable polymer composites based on synthetic and natural polymers of various classes. Polym. Sci. Ser. C 58, 62–73 (2016). https://doi.org/10.1134/S1811238216010100
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1811238216010100