Abstract
A statistical analysis of the distribution of the tensile strength σ of ultra-oriented ultra-high-molecular-weight polyethylene (UHMWPE) film filaments has been performed in the framework of the Weibull model using the results obtained from a large number (50) of measurements. The UHMWPE film filaments have been produced by means of high-temperature multistage zone drawing of xerogels prepared from 1.5% UHMWPE solutions in decalin. The Weibull modulus has been determined for this type of materials. It has been shown that, for the ultimate draw ratio λ = 120, the average tensile strength is equal to 4.7 GPa, which is significantly higher than the tensile strength σ = 3.5 GPa for commercial gel-spun UHMWPE fibers manufactured by the DSM Company (The Netherlands) and the Honeywell International Incorporation (United States). It has been demonstrated that, for 20% of the specimens thus prepared, the tensile strength reaches record-high values σ = 5.2–5.9 GPa.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
V. A. Marikhin and L. P. Myasnikova, in Oriented Polymer Materials, Ed. by S. Fakirov (Hüthig and Wepf, Zug, Switzerland, 1996), p. 38.
A. Ya. Malkin, A. A. Askadskii, and V. V. Kovriga, Methods of Measurement of Mechanical Properties of Polymers (Khimiya, Moscow, 1978) [in Russian].
F. Tanaka, T. Okabe, H. Okuda, I. A. Kinloch, and R. J. Young, Composites, Part A 57, 88 (2014).
L. G. Baikova, T. I. Pesina, M. F. Kireenko, L. V. Tikhonova, and C. R. Kurkjian, Tech. Phys. 60 (6), 869 (2015).
D. M. Wilson, J. Mater. Sci. 32, 2535 (1997).
G. Sun, J. H. L. Pang, J. Zhou, Y. Zhang, Z. Zhan, and L. Zheng, Appl. Phys. Lett. 101 (6), 131905 (2012).
W. Weibull, J. Appl. Mech. 18, 293 (1951).
J. D. Sullivan and P. H. Lauzon, J. Mater. Sci. Lett. 5, 1245 (1986).
M. R. Gurvich, A. T. Dibenedetto, and A. Pegoretti, J. Mater. Sci. 32, 3711 (1997).
N. M. Pugno and R. S. Ruoff, J. Appl. Phys. 99, 024301 (2006).
S. van der Zwaag, J. Test. Eval. 17 (2), 292 (1989).
B. Bergman, J. Mater. Sci. Lett. 3, 689 (1984).
K. Trustrum and A. de S. Jayatilaka, J. Mater. Sci. 14, 1080 (1979).
C. A. Klein, J. Appl. Phys. 101 (12), 124909 (2007).
I. M. de Rosa, J. M. Kenny, D. Puglia, C. Santulli, and F. Sarasini, Compos. Sci. Technol. 70, 116 (2010).
Y. Zhang and X. Wang, J. Mater. Sci. 37, 1401 (2002).
H. F. Wu and A. N. Netravali, J. Mater. Sci. 27, 3318 (1992).
Z. P. Bazant, J.-L. Le, and M. Z. Bazant, Proc. Acad. Sci. USA 106, 11484 (2009).
Z. P. Bazant and S.-D. Pang, Proc. Acad. Sci. USA 103, 9434 (2006).
A. H. Barber, R. Andrews, L. S. Schadler, and H. D. Wagner, Appl. Phys. Lett. 87 (20), 203106 (2005).
A. Roy, S. Chakraborty, S. P. Kundu, R. K. Basak, S. B. Majumber, and B. Adhikari, Bioresour. Technol. 107, 222 (2012).
A. de S. Jayatilaka and K. Trustrum, J. Mater. Sci. 12, 1426 (1977).
V. A. Marikhin, L. P. Myasnikova, and Z. Pel’tsbauer, Vysokomol. Soedin., Ser. A 23, 2108 (1981).
V. A. Marikhin, L. P. Myasnikova, and Z. Pel’tsbauer, Vysokomol. Soedin., Ser. B 24, 437 (1982).
N. A. Pertsev, V. A. Marikhin, L. P. Myasnikova, and Z. Pel’tsbauer, Vysokomol. Soedin., Ser. A 27, 1438 (1985).
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © Yu.M. Boiko, V.A. Marikhin, L.P. Myasnikova, O.A. Moskalyuk, E.I. Radovanova, 2016, published in Fizika Tverdogo Tela, 2016, Vol. 58, No. 10, pp. 2065–2068.
Rights and permissions
About this article
Cite this article
Boiko, Y.M., Marikhin, V.A., Myasnikova, L.P. et al. Statistical analysis of the strength of ultra-oriented ultra-high-molecular-weight polyethylene film filaments in the framework of the Weibull model. Phys. Solid State 58, 2141–2144 (2016). https://doi.org/10.1134/S1063783416100103
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1063783416100103