Abstract
The authors prove feasibility and efficiency of high-strength stone wire saw cutting in rock mass with subvertical and low-angle joints as well as drilling-and-wedge cutting of stone into marketable size blocks on the working site. The article presents and substantiates the procedure for rational selection of technology for high-strength stone preparation for cutting, considering geological conditions (shape of mineral body, orientation and spacing of joints), local temperature, as well as physico-mechanical properties and mineralogical composition of rocks.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Aglyukov, Kh.I., Povyshenie kachestva tekhnologii dobychi blochnogo granita. Ekonomika, upravlenie, kachestvo: mezhvuz. sb. nauch. tr. (Improvement of Granite Block Cutting Technology Quality. Economy, Management, Quality: Interinstitutional Collection of Scientific Papers), Magnitogorsk: MGTU, 2003.
Dubrovsky, A.B. and Ulyakov, M.S., Selection of Equipment for Nizhne-Sanarsk Grandiorite Cutting, Gorny Zh., 2011, no. 5.
Aglyukov, Kh.I., Nalog na dobychu poleznykh iskopaemykh (Mineral Mining Tax), Magnitogorsk: MGTU, 2010.
Pershin, G.D., Karaulov, N.G., Ulyakov, M.S., et al., Features of Diamond-Wire Saws Application for Rock Overburden Removal at Marble Quarry Construction, SWorld, 2013, vol. 14, issue 13.
Aglyukov, Kh.I., Justification of Block Granite Cutting Technology Efficiency, Dobycha, obrabotka i primenenie prirodnogo kamnya: sb. nauch. tr. (Natural Stone Cutting, Shaping and Use: Collection of Scientific Papers), Magnitogorsk: MGTU, 2012.
Pshenichnaya, E.G., Gorbatova, E.A., Karaulov, N.G., et al., Technical and Economic Validation of High- Strength Natural Stone Cutting Technology, Dobycha, obrabotka i primenenie prirodnogo kamnya: sb. nauch. tr. (Natural Stone Cutting, Shaping and Use: Collection of Scientific Papers), Magnitogorsk: MGTU, 2012.
Aglyukov, Kh.I., Efficiency of Granite Breakstone Production, Dobycha, obrabotka i primenenie prirodnogo kamnya: sb. nauch. tr. (Natural Stone Cutting, Shaping and Use: Collection of Scientific Papers), Magnitogorsk: MGTU, 2009.
Ulyakov, M.S., Justification of Combination Method for High-Strength Stone Cutting, Cand. Tech. Sci. Dissertation, Magnitogorsk: MGTU, 2013.
Bychkov, G.V. and Kokunin, R.V., Optimized Method to Open Up Natural Stone Beds at Potential and Operating Deposits, Dobycha, obrabotka i primenenie prirodnogo kamnya: sb. nauch. tr. (Natural Stone Cutting, Shaping and Use: Collection of Scientific Papers), Magnitogorsk: MGTU, 2007.
Pashchenko, K.G., Bakhmatov, Yu.F., Frolushkina, K.A., et al., Influence of Process Parameters on Breakage of Wire in No-Jet Drawing, Proc. 67th Sci. Conf., Magnitogorsk: MGTU, 2009.
Pashchenko, K.G., Bakhmatov, Yu.F., and Golubchik, E.M., Influence of Plastic Tension–Flexure on the Wire Properties in Scale Removal and Drawing, Steel, 2011, vol. 41, no. 3.
Pashchenko, K.G., Bakhmatov, Y.F., and Golubchik, E.M., Influence of Plastic Tension–Flexure on the Wire Properties in Scale removal and Drawing, Steel in Translation, 2011, vol. 41, no. 3.
Pershin, G.D., Karaulov, N.G., and Ulyakov, M.S., Research of High-Strength Dimension Stone Mining Technological Schemes in Russia and Abroad, SWorld, 2013, vol. 11, issue 2.
Velikanov, V.S., Realizatsiya podkhodov po sovershenstvovaniyu ergonomicheskikh pokazatelei kar’ernykh ekskavatorov (Approaches to Improvement of Ergonomic Characteristics of Mine Shovels), Magnitogorsk: MGTU, 2011.
Pershin, G.D., Pshenichnaya, E.G., and Ulyakov, M.S., Influence of Control Mode on Output of Wire Saw, Dobycha, obrabotka i primenenie prirodnogo kamnya: sb. nauch. tr. (Natural Stone Cutting, Shaping and Use: Collection of Scientific Papers), Magnitogorsk: MGTU, 2012.
Velikanov, V.S., Testing Procedures and Training Units in Advanced Vocational Training of Mining Machine Operators, Gorny Zh., 2012, no. 9.
Chirkov, A.S., Dobycha i pererabotka stroitel’nykh gornykh porod: spravochnik dlya vuzov (Cutting and Shaping of Rocks for Construction: University Reference Book), Moscow: MGTU, 2001.
Ulyakov, M.S., Improvement of High-Strength Dimensional Stone Cutting in Complicated Ground Conditions, SWorld, 2012, vol. 8, issue 4.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © G.D. Pershin, N.G. Karaulov, M.S. Ulyakov, 2015, published in Fiziko-Tekhnicheskie Problemy Razrabotki Poleznykh Iskopaemykh, 2015, No. 1, pp. 111–121.
Rights and permissions
About this article
Cite this article
Pershin, G.D., Karaulov, N.G. & Ulyakov, M.S. Selection of high-strength dimension stone cutting method, considering natural jointing. J Min Sci 51, 129–137 (2015). https://doi.org/10.1134/S1062739115010172
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1062739115010172