Abstract
Applying ultrasonic-tomography systems makes it possible to precisely determine the shape and dimensions of flaws with the aim of establishing the degree to which the flaws influence safe operation of tested objects. This problem is solved by using special algorithms that make use of echo-signals recorded by an ultrasonic transducer to generate synthesized images of flaws in the sample. The use of phased arrays in ultrasonic tomography is explained by their ability to provide exhaustive data about the internal structure of a test object, thus allowing formation of the high-quality synthesized images of flaws in the object. Increasing the speed of ultrasonic tomography by using phased arrays necessitates the development and implementation of fast data-processing algorithms. In this connection, of interest are calculation algorithms in the frequency domain, which ensure the high speed of producing synthesized images. An ultrasonic-tomography algorithm is proposed that is based on calculations in the frequency domain. The algorithm takes the complex nature of the propagation of ultrasonic waves into account and is connected with the presence of media with different acoustic properties (e.g., in the case of immersion tests). Possibilities offered by the algorithm are investigated by computer simulations using the licensed CIVA 2016 software package and experimentally.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Barkhatov, VA., Development of methods of ultrasonic nondestructive testing of welded joints, Russ. J. Nondestr. Test., 2003, vol. 39, no. 1, pp. 23–47.
Doctor, SR., Hall, TE., and Reid, LD., SAFT—the evolution of a signal processing technology for ultrasonic testing, NDT Int., 1986, vol. 19, no. 3, pp. 163–167.
Langenberg, KJ., Berger, M, Kreutter, T, Mayer, K, and Schmitz, V, Synthetic aperture focusing technique signal processing, NDT Int., 1986, vol. 19, no. 3, pp. 177–189.
Holmes, C, Drinkwater, B, and Wilcox, P, The post-processing of ultrasonic array data using the total focusing method, Insight-Non-Destruct. Test. Cond. Monit., 2004, vol. 46, no. 11, pp. 677–680.
Bazulin, EG., Comparison of systems for ultrasonic nondestructive testing using antenna arrays or phased antenna arrays, Russ. J. Nondestr. Test., 2013, vol. 49, no. 7, pp. 404–423.
Holmes, C, Drinkwater, BW., and Wilcox, PD., Post-processing of the full matrix of ultrasonic transmit–receive array data for non-destructive evaluation, NDT & Int., 2005, vol. 38, no. 8, pp. 701–711.
Verkooijen, J and Boulavinov, A, Sampling phased array a new technique for ultrasonic signal processing and imaging, Insight-Non-Destr. Test. Cond. Monit., 2008, vol. 50, no. 3, pp. 153–157.
Bolotina, I, Bulavinov, A, Lider, A, Sednev, D, and Shtaynbreher, A, Ultrasonic inspection of spent nuclear fuel casks, IOP Conf. Ser. Mater. Sci. Eng., 2015, vol. 81, no. 1, article no. 012073.
Portzgen, N, Gisolf, D, and Blacquiere, G, Inverse wave field extrapolation: a different NDI approach to imaging defects, IEEE Trans. Ultrason. Ferroelectrics Freq. Control, 2007, vol. 54, no. 1.
Stepinski, T, An implementation of synthetic aperture focusing technique in frequency domain, IEEE Trans. Ultrason. Ferroelectrics Freq. Control, 2007, vol. 54, no. 7.
Skjelvareid, MH., Olofsson, T, Birkelund, Y, and Larsen, Y, Synthetic aperture focusing of ultrasonic data from multilayered media using an omega-k algorithm, IEEE Trans. Ultrason. Ferroelectrics Freq. Control, 2011, vol. 58, no. 5.
Lukomski, T, Non-stationary phase shift migration for flaw detection in objects with lateral velocity variations, Insight-Non-Destr. Test. Cond. Monit., 2014, vol. 56, no. 9, pp. 477–482.
Dolmatov, DO., Salchak, YA., and Pinchuk, R, Frequency-domain imaging algorithm for ultrasonic testing by application of matrix phased arrays, MATEC Web Conf., 2017, vol. 102, article no. 1015.
Stolt, RH., Migration by Fourier transform, Geophysics, 1978, vol. 43, no. 1, pp. 23–48.
Gazdag, J, Wave equation migration with the phase-shift method, Geophysics, 1978, vol. 43, no. 7, pp. 1342–1351.
Mahaut, S, Darmon, M, Chatillon, S, Jenson, F, and Calmon, P, Recent advances and current trends of ultrasonic modelling in CIVA, Insight-Non-Destr. Test. Cond. Monit., 2009, vol. 51, no. 2, pp. 78–81.
Rougeron, G, Lambert, J, Iakovleva, E, Lacassagne, L, and Dominguez, N, Implementation of a GPU accelerated total focusing reconstruction method within CIVA software, AIP Conf. Proc., 2014, vol. 1581, no. 1, pp. 1983–1990.
Fan, C, Caleap, M, Pan, M, and Drinkwater, BW., A comparison between ultrasonic array beamforming and super resolution imaging algorithms for non-destructive evaluation, Ultrasonics, 2014, vol. 54, no. 7, pp. 1842–1850.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © D.O. Dolmatov, D.G. Demyanyuk, D.A. Sednev, R.V. Pinchuk, 2018, published in Defektoskopiya, 2018, No. 4, pp. 12–17.
Rights and permissions
About this article
Cite this article
Dolmatov, D.O., Demyanyuk, D.G., Sednev, D.A. et al. Applying the Algorithm of Calculation in the Frequency Domain to Ultrasonic Tomography. Russ J Nondestruct Test 54, 232–236 (2018). https://doi.org/10.1134/S1061830918040058
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1061830918040058