Abstract
Problems of the evaluation of the defectiveness of weld joints of the main parts of GTEs are considered. Experimental studies were performed and the optimal method for testing to accelerate the data sampling on detected defects was chosen.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Nochovnaya, N.A., Perspectives and problems of application of titanium alloys, in Aviats. Mater. Tekhnol., 2007, no. 1, pp. 4–8.
Kashapov, O.S., Novak, A.V., Nochovnaya, N.A., and Pavlova, T.V., State, problems and prospects of heat-resistant titanium alloys for GTE parts, Tr. Vsesoyuz. Inst. Aviats. Mater., 2013, no. 3, p. 02. http://www.viam-works.ru
Kablov, E.N., Ospennikova, O.G., and Bazyleva, O.A., Materials for parts of gas-turbine engines under high heat loads, Vestn. Mosk. Gos. Tekh. Univ. im. N. E. Baumana, Ser. “Mashinostr.”, 2011, suppl. no. 1, pp. 13–19.
Kablov, E.N., Strategical areas of developing materials and their processing technologies for the period up to 2030, Aviats. Mater. Tekhnol., 2012, no. 5, pp. 7–17.
Kablov, E.N., Modern materials—fundamentals of innovative modernization of Russia, Met. Evrazii, 2012, no. 3, pp. 10–15.
Khorev, A.I., Fundamental and applied projects on titanium alloys and perspective areas of their development, Tr. Vsesoyuz. Inst. Aviats. Mater., 2013, no. 2, p. 04. http://www.viam-works.ru
Inozemtsev, A.A., Bashkatov, I.G., and Koryakovtsev, A.S., Use of titanium-based alloys in the items developed by OAO Aviadvigatel, Aviats. Mater. Tekhnol., 2007, no. 1, pp. 13–16.
Aviatsionnye pravila. Ch. 33. Normy letnoi godnosti dvigatelei vozdushnykh sudov, (Aviation Rules. Part 33. Aircraft Engine Airworthiness Standards) Moscow: OAO “Aviaizdat”, 2012, pp. 7–11.
FAAAC 33.14 “Damage Tolerance for High Energy Turbine Engine Rotors”, 2005.
Makhnenko, V.I. and Kvasnitskii, V.V., Peculiarities of formation of stress-strain state in diffusion bonds between dissimilar materials, Avtom. Svarka, 2009, no. 8, pp. 7–11.
Svetushkov, N.N. and Ovsepyan, S.V., Calculation of temperature fields in the process of friction welding of pieces from heat-resistant nickel alloys, Probl. Chern. Metall. Materialoved., 2012, no. 4, pp. 21–25.
Lukin, V.I., Koval’chuk, V.G., Samorukov, M.L., and Gridnev, Yu.M., Study of influence of technology for rotational friction welding of deformable heatproof nickel alloy VZh175 on structure and strength characteristics of welds, Vestn. Mosk. Gos. Tekh. Univ. im. N. E. Baumana, Ser. “Mashinostr.”, 2011, suppl. no. 1, pp. 114–121.
Ovsepyan, S.V., Lomberg, B.S., Grigor’eva, T.I., and Bakradze, M.M., Heat resistant wrought welded superalloy for disks of GTE with the low coefficient of thermal expansion, Metallurg, 2013, no. 7, pp. 61–65.
Nochovnaya, N.A. and Panin, P.V., Residual macrostress analysis in welded junctions of different titanium alloys, Tr. Vsesoyuz. Inst. Aviats. Mater., 2014, no. 5, p. 02. http://www.viam-works.ru
Mazalov, I.S., Filonova, E.V., and Lomberg, B.S., Formation of microstructure of nickel weldable VGH172 superalloy in process of deformation and heat treatment of semi-finished products, Tr. Vsesoyuz. Inst. Aviats. Mater., 2013, no. 12, p. 01. http://www.viam-works.ru
Boichuk, A.S., Generalov, A.S., Dalin, M.A., and Stepanov, A.V., Probabilistic certainty value of ultrasonic nondestructive test results of polymer composite constructions used in aviation industry, Remont. Vosstanov. Moderniz., 2013, no. 9, pp. 36–39.
Lozhkova, D.S., Dalin, M.A., and Tsykunov, N.V., Reliability evaluation of titanium alloys automated ultrasonic inspection using mathematical modeling, V Mire Nerazrushayushchego Kontrolya, 2014, no. 4.
Dalin, M.A., Generalov, A.S., Boichuk, A.S., and Lozhkova, D.S., Basic development tendencies of acoustic non-destructive control methods, Aviats. Mater. Tekhnol., 2013, no. 1, pp. 64–69.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © D.S. Lozhkova, I.S. Krasnov, 2015, published in Defektoskopiya, 2015, Vol. 51, No. 2, pp. 10–16.
Rights and permissions
About this article
Cite this article
Lozhkova, D.S., Krasnov, I.S. Experimental studies on the evaluation of the defectiveness of weld joints of the main parts of GTEs. Russ J Nondestruct Test 51, 65–69 (2015). https://doi.org/10.1134/S1061830915020060
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1061830915020060