Abstract
Poly(o-toluidine) (sodium dodecyl sulfate) (POT(SDS)) film was electrosynthesized on carbon paste electrode (CPE) by using the cyclic voltammetry technique in aqueous solution containing o-toluidine (OT), sulfuric acid and SDS. Then, copper oxide was incorporated by immersion of POT(SDS)/CPE in a solution of copper sulfate and using constant potential method. Then, the electrochemical characterization of the modified electrode is presented in alkaline solution. For the first time, electrochemical behaviour of amoxicillin (AMX) at the Cu/POT(SDS)/CPE has been investigated using cyclic voltammetry (CV) and chronoamperometric method. The experimental results suggest that the modified electrode exhibits electrocatalytic effect on the oxidation of AMX resulting in a marked enhancement of the anodic peak current response. Under the selected conditions, the anodic peak current was linearly dependent on the concentration of AMX in the range 80–200 and 5–150 μM with CV and amperometric method, respectively. The detection limits (2δ) were also estimated to be 60 and 3 μM. Some kinetic parameters such as the transfer second-order rate constant (k = 4.9 × 106 cm3 mol–1 s–1) of AMX was calculated. Therefore, this modified electrode was a simple, rapid and new electrode to determine AMX in pharmaceutical preparations.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Delgado, J.N. and Remers, W.R., Text Book of Organic Medicinal and Pharmaceutical Chemistry, Lippincott, Philadilphia: Wilson and Gisvolds, 1995, Ch. 7.
Mohamed, G.G., J. Pharm. Biomed. Anal., 2001, vol. 24, p. 561.
Pasamontes, A. and Callao, M.P., Anal. Chim. Acta, 2004, vol. 515, p. 159.
Salem, H., Anal. Chim. Acta, 2004, vol. 515, p. 333.
Al-Abachi, M.Q., Haddi, H., and Al-Abachi, A.M., Anal. Chim. Acta, 2005, vol. 554, p. 184.
Santos, S.M., Henriques, M., Duarte, A.C., and Esteves, V.I., Talanta, 2007, vol. 71, p. 731.
Pajchel, G., Pawowski, K., and Tyski, S., J. Pharm. Biomed. Anal., 2002, vol. 29, p. 75.
Madhura, D., Vandana, G., and Pranav, J., Int. J. Pharm. Pharm. Sci., 2010, vol. 2, p. 129.
Matar, K.M., Chromatographia, 2006, vol. 64, p. 255.
Tavakoli, N., Varshosaz, J., Dorkoosh, F., and Zargarzadeh, M.R., J. Pharm. Biomed. Anal., 2007, vol. 43, p. 325.
Rezaei, B. and Damiri, S., Electroanalysis, 2009, vol. 21, p. 1577.
Santos, D.P., Bergamini, M.F., and Zanoni, M.V.B., Sens. Actuators, Ser. B, 2008, vol. 133, p. 398.
Hajjizadeh, M., Jabbari, A., Heli, H., Moosavi-Movahedi, A.A., Shafiee, A., and Karimian, K., Anal. Biochem., 2008, vol. 373, p. 337.
Vidotti, M., Torresi, S.C., and Kubota, L.T., Sens. Actuators, Ser. B, 2008, vol. 135, p. 245.
Adhikari, B. and Majumdar, S., Prog. Polym. Sci. 2004, vol. 29, p. 699.
Maria, H., Chen, Y.M., and Richard, S., J. Electrochem. Soc., 1996, vol. 143, p. 498.
Sivakumar, C., Electrochim. Acta, 2007, vol. 52, p. 4182.
Li, J. and Zhang, X., Am. J. Anal. Chem., 2012, vol. 3, p. 195.
Yao, Y.L. and Shiu, K.K., Electroanalysis, 2008, vol. 20, p. 1542.
El-Shafei, A.A., Abd Elhafeez, A.M., and Mostafa, H.A., J. Solid State Electrochem., 2010, vol. 14, p. 185.
Luque, G.L., Rodriguez, M.C., and Rivas, G.A., Talanta, 2005, vol. 66, p. 467.
Xie, Y. and Huber, C.O., Anal. Chem., 1991, vol. 63, p. 1714.
Franklin, T.C., Lee, K.H., Manlangit, E., and Nnodimele, R., J. Electrochem. Soc., 1996, vol. 143, p. 3435.
Tsarev, Y.V., Dmitriev, E.A., and Kostrov, V.V., Russ. J. Appl. Chem., 2002, vol. 75, p. 1117.
Wels, B. and Johnson, D.C., J. Electrochem. Soc., 1990, vol. 137, p. 2785.
Sljukic, B., Banks, C.E., Crossley, A., and Compton, R.G., Electroanalysis, 2007, vol. 19, p. 79.
Ojani, R., Raoof, J.B., and Norouzi, B., J. Solid State Electrochem., 2010, vol. 14, p. 621.
Norouzi, B. and Norouzi, M., J. Solid State Electrochem., 2012, vol. 16, p. 3003.
Lee, J.Y. and Tan, T.C., J. Electrochem. Soc., 1990, vol. 137, p. 1402.
Abrantes, L.M. and Correia, J.P., Electrochim. Acta, 1996, vol. 41, p. 1747.
Jovic, V.D., Trisovic, T., Jovic, B.M., and Vojnovic, M., J. Electroanal. Chem., 1996, vol. 408, p. 149.
Heli, H., Jafarian, M., Mahjani, M.G., and Gobal, F., Electrochim. Acta, 2004, vol. 49, p. 4999.
Pyun, C.H. and Park, S.M., J. Electrochem. Soc., 1986, vol. 132, p. 2024.
Abd El Haleem, S.M. and Ateya, B.G., J. Electroanal. Chem., 1981, vol. 117, p. 309.
Marioli, J.M. and Kuwana, T., Electrochim. Acta, 1992, vol. 37, p. 1187.
Burke, L.D., Ahern, M.J.G., and Ryan, T.G., J. Electrochem. Soc., 1990, vol. 137, p. 553.
Zadeii, J.M., Marioli, J., and Kuwana, T., Anal. Chem., 1991, vol. 63, p. 649.
Brisard, G.M., Rudnicki, J.D., McLarnon, F., and Cairns, E.J., Electrochim. Acta, 1995, vol. 40, p. 859.
Casella, I.G. and Gatta, M., J. Electroanal. Chem., 2000, vol. 494, p. 12.
Mirceski, V. and Gulaboski, R., Electroanalysis, 2001, vol. 13, p. 1326.
Mirceski, V. and Gulaboski, R., J. Solid State Electrochem., 2003, vol. 7, p. 157.
Bard, A.J. and Faulkner, L.R., Electrochemical Methods, N.Y.: Wiley, 2001.
Bergamini, M.F., Teixeira, M.F.S., Dockal, E.R., Bocchi, N., and Cavalheiro, E.T.G., J. Electrochem. Soc., 2006, vol. 153, p. E94.
Ojani, R., Raoof, J.B., and Zamani, S., Bioelectrochem., 2012, vol. 85, p. 44.
Rezaei, B. and Damiri, S., Electroanalysis, 2009, vol. 21, p. 1577.
Karim-Nezhad, G., Pashazadeh, A., and Pashazadeh, S., J. Korean Chem. Soc., 2013, vol. 57, p. 322.
Author information
Authors and Affiliations
Corresponding author
Additional information
Published in Russian in Elektrokhimiya, 2016, Vol. 52, No. 1, pp. 43–53.
The article is published in the original.
Rights and permissions
About this article
Cite this article
Norouzi, B., Mirkazemi, T. Electrochemical sensor for amoxicillin using Cu/poly (o-toluidine) (sodium dodecyl sulfate) modified carbon paste electrode. Russ J Electrochem 52, 37–45 (2016). https://doi.org/10.1134/S1023193516010067
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1023193516010067