Abstract
The microstructure and thermophysical properties of aluminum-matrix composites have been studied, in which a granulated Al–Zn–Mg–Cu alloy has been used as the matrix, and SiC particles taken in the amounts of 10, 20, and 30 vol % have bee used as the filler. It has been shown that, with an increase in the amount of the filler, the temperatures of the solidus and liquidus of the composites and the values of the thermal expansion coefficient and density increase, whereas the heat capacity, thermal conductivity, and thermal diffusivity decrease. The heat capacity of the composite depends on the amount of the filler: upon heating from 25 to 500°С, the heat capacity of the composite with 10 vol % SiC increases by only 16%, while that of the composite with 20 vol % SiC increases by 19%; and, at 39 vol % SiC, it increases by 36%.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Composite Materials, Vol. 4: Metallic Matrix Composites, Ed. by K. G. Kreider (Academic, New York, 1974; Mashinostroenie, Moscow, 1978).
I. A. Evdokimov, E. S. Prusov, and A. V. Kireev, “Friction metallic-matrix composite materials modified by carbon nanostructures based on aluminum and its alloys with enhanced mechanical and exploitation properties,” Polzunov. Al’manakh, No. 2, 264–268 (2010).
I. N. Fridlyander, “Modern aluminum and magnesium alloys and composite materials based on them,” Metal Sci. Heat Treat. 44, 292–296 (2002).
L. R. Vishnyakov, V. P. Moroz, I. M. Romashko, E. L. Vishnyakova, and O. P. Yaremenko, “Fabrication of aluminum matrix composites reinforced with carbide and oxide fillers,” Kompoz. Nanostrukt., No. 1, 37–45 (2013).
R. Fernandez and G. Gonzalez-Doncel, “Understanding the creep fracture behavior of aluminum alloys and aluminum alloy metal matrix composites,” Mater. Sci. Eng., A 528, 8218–8225 (2011).
Yishi Su, Qiubao Ouyang, Wenlong Zhang, Zhiqiang Li, Qiang Guo, Genlian Fan, and Di Zhang, “Composite structure modeling and mechanical behavior of particle reinforced metal matrix composites,” Mater. Sci. Eng., A 597, 359–369 (2014).
L. Zhao, M. Zhao, H. Yan, X. Cao, and J. Zhang, “Mechanical behavior of SiC foam–SiC particles/Al hybrid composites,” Trans. Nonferr. Met. Soc. China 19, 547–551 (2009).
F. Ortega-Celaya, M. I. Pech-Canul, J. Lopes-Cuevars, J. C. Rendon-Angeles, and M. A. Pech-Canul, “Microstructure and impact behavior of Al/SiCp composites fabricated by pressure-less infiltration with different types of SiCp,” Mater. Proces. Tech. 183, 368–373 (2007).
A. V. Konovalov and S. V. Smirnov, “Modern state and directions of study of Al/SiC metal-matrix composites,” Konstrukt. Kompozit. Mater., No. 1, 30–35 (2015).
N. B. Pugacheva, N. S. Michurov, and T. M. Bykova, “The structure and properties of the 30Al–70SiC metal matrix composite material,” Diagn., Res., Mech. Mater. Struct., No. 6, 6–18 (2015). doi 10.17804/2410-9908.2015.6.006-018. http://www.dream-journal.org/issues/2015-6/2015-6_56.html10.17804/2410-9908.2015.6.006-018
N. B. Pugacheva, N. S. Michurov, and T. M. Bykova, “Structure and properties of the Al/SiC composite material,” Phys. Met. Metallogr. 117, 654–660 (2016).
A. S. Smirnov, A. V. Konovalov, and O. Yu. Muizemnek, “Modelling and simulation of strain resistance of alloys taking into account barrier effects,” Diagn., Res., Mech. Mater. Struct., No. 1, 61–72 (2015). doi 10.17804/2410-9908.2015.1.061-072. http://www.dream-journal.org/issues/2015-1/2015-1_18.html10.17804/2410-9908.2015.1.061-072.
Yu. V. Khalevitskii, M. V. Myasnikova, and A. V. Konovalov, “Methods of formation of calculating model of representative volume of Al/SiC metallomatrix composite with internal structure,” Matemat. Model. Estest. Nauk. 1, 277–280 (2014).
V. S. Chirkin, Thermophysical Properties of Materials for Nuclear Industry (Atomizdat, Moscow, 1978) [in Russian].
A. I. Belyaev, Metallurgy of Light Metals (Metallurgiya, Moscow, 1970) [in Russian].
“Overview of mechanical testing standards,” Appl. Bull., CSM Instr., No. 18 (2002).
B. A. Kolachev, V. I. Elagin, and V. A. Livanov, Metallography and Heat Treatment of Nonferrous Metals and Alloys (MISiS, Moscow, 2001) [in Russian].
S. V. Smirnov and E. O. Smirnova, “A technique for determining coefficients of the “stress–strain” diagram by nanoscratch test results,” J. Mater. Res. 29, 1730–1736 (2014).
D. A. Konovalov, I. A. Golubkova, and S. V. Smirnov, “Determining the strength properties of individual layers of strained laminated composites by kinetic indentation,” Russ. J. Nondestruct. Testing 47, 852–857 (2011).
V. Yu. Kulikovskii, V. Vorlichek, P. Bogach, M. Strainyanek, Z. Chtvertlik, A. V. Kurdyumov, and V. F. Gorban’, “Mechanical properties of amorphous and nanocrystalline films of silicon and silicon carbide,” Nanostrukt. Materialoved., No. 1, 42–51 (2008).
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © N.B. Pugacheva, N.S. Michurov, E.I. Senaeva, T.M. Bykova, 2016, published in Fizika Metallov i Metallovedenie, 2016, Vol. 117, No. 11, pp. 1188–1195.
Rights and permissions
About this article
Cite this article
Pugacheva, N.B., Michurov, N.S., Senaeva, E.I. et al. Structure and thermophysical properties of aluminum-matrix composites. Phys. Metals Metallogr. 117, 1144–1151 (2016). https://doi.org/10.1134/S0031918X16110119
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S0031918X16110119