Abstract
Metal shields of various thickness made of various steels and used to protect the shells of explosion chambers from damage by debris and reduce the loads on the structural elements have been studied. Dependences of the equivalent stresses in the protective shields and shells of explosion chambers and the final size of the gap between the shields and the shell on wall thickness, steel grade, and initial gap size were obtained by numerical simulation. Examples of explosion chamber designs with protective shields are given.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
W. E. Baker, “The Elastic-Plastic Response of thin Spherical Shells to Internal Blast Loading,” J. Appl. Mech. 27, 139–144 (1960).
A. F. Demchuk, “Method for Designing Explosion Chambers,” Prikl. Mekh. Tekh. Fiz. 9 (5), 47–50 (1968) [J. Appl. Mech. Tech. Phys. 9 (5), 558–559 (1968)].
A. F. Demchuk and V. P. Isakov, Metal Explosion Chambers (Krasnoyarsk State Univ., Krasnoyarsk, 2006) [in Russian].
A. Shtertser, O. Stoyanovskii, B. Zlobin, et al., “Design and Manufacturing of Explosion Chambers for Scientific Research and Explosive Working of Materials,” Arch. Metall. Mater. 59 (4), 1619–1624 (2014); DOI: https://doi.org/10.2478/amm-2014-0275.
A. Shtertser, B. Zlobin, and O. Stoyanovskii, “Metal Explosion Chambers and Their Application,” Appl. Mech. Materials 788, 306–312 (2015). DOI: https://doi.org/10.4028/www.scientific.net/amm.788.306.
A. A. Deribas, A. A. Shtertser, and E. E. Zubkov, “Explosive Hardening and Its Application in Production of Railroad Switch Frogs,” Adv. Mater. Technol., No 3, 13–16 (2018); DOI: https://doi.org/10.17277/amt.2018.03.pp.013-016.
A. A. Pikarevskii and O. I. Stoyanovskii, “Effect of Shielding of a Part of the Casing of a Technological Explosion Chamber on Its Stress State,” Prikl. Mekh. Tekh. Fiz. 54 (2), 196–202 (2013) [J. Appl. Mech. Tech. Phys. 54 (2), 337–342 (2013)].
O. I. Stoyanovskii, B. S. Zlobin, A. A. Shtertser, and Yu. P. Meshcheryakov, “Metal Explosion Chambers: Designing, Manufacturing, Application,” J. Phys.: Conf. Ser. 894, 012091 (2017).
V. M. Kornev, V. V. Adishchev, A. N. Mitrofanov, and V. A. Grekhov, “Experimental Investigation and Analysis of the Vibrations of the Shell of an Explosion Chamber,” Fiz. Goreniya Vzryva 15 (6), 155–157 (1979) [Combust., Expl., Shock Waves 15 (6), 821–824 (1979)].
A. I. Abakoumov, V. V. Egunov, A. G. Ivanov, et al., “Calculation and Experiments on the Deformation of Explosion-Chamber Shells,” Prikl. Mekh. Tekh. Fiz. 25 (3), 127–130 (1984) [J. Appl. Mech. Tech. Phys. 25 (3), 455–458 (1984)].
S. A. Zhdan, “Dynamic Load Acting on the Wall of an he Explosion Chamber,” Fiz. Goreniya Vzryva 17 (2), 142–146 (1981) [Combust., Expl., Shock Waves 17 (2), 241–244 (1981)].
Yu. P. Meshcheryakov, “Numerical Modeling of the Shearing of Irradiated Fuel Assemblies,” Prikl. Mekh. Tekh. Fiz. 47 (3), 134–140 (2006) [J. Appl. Mech. Tech. Phys. 47 (3), 419–425 (2006)].
S. P. Timoshenko, Course in Elasticity Theory (Naukova Dumka, Kiev, 1972) [in Russian].
M. L. Wilkins, “Calculation of Elastic-Plastic Flow,” in Methods in Computational Physics, Vol. 3: Fundamental Methods in Hydrodynamics (Academic Press, New York-London, 1964).
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © Yu.P. Meshcheryakov, A.A. Shtertser, B.S. Zlobin.
Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 60, No. 4, pp. 217–224, July–August, 2019.
Rights and permissions
About this article
Cite this article
Meshcheryakov, Y.P., Shtertser, A.A. & Zlobin, B.S. Explosion Chambers with Metal Shields. J Appl Mech Tech Phy 60, 777–783 (2019). https://doi.org/10.1134/S0021894419040230
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S0021894419040230