Abstract
Results of an experimental study of the behavior of St.3, 20Kh13, and 08Kh18N10T steels under static and dynamic loading are reported. The influence of the strain rate and temperature on characteristics of strength and plasticity is studied. Based on the data obtained, the parameters of the Johnson–Cook model are determined. This model is used in commercial software to describe the yield surface radius as a function of loading parameters. The adequacy of the identified model is verified in a series of special test experiments.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
H. Kolsky, “An Investigation of the Mechanical Properties of Material at Very High Rates of Loading,” Proc. Phys. Soc. London 62B, 676–700 (1949).
A. M. Bragov and A. K. Lomunov, “Peculiarities of Obtaining Stress–Strain Curves by the Kolsky Method,” in Applied Problems of Strength and Plasticity (all-union collection of scientific papers) (Gorkii University, Gorkii, 1984), pp. 125–137.
A. M. Bragov and A. K. Lomunov, “Methodological Aspects of Studying Dynamic Material Properties Using the Kolsky Method,” Int. J. Impact Eng. 16 (2), 321–330 (1995).
T. Nicholas, “Tensile Testing of Materials at High Rates of Strain,” Exp. Mech. 21 (5), 177–195 (1981).
A. M. Bragov, “Experimental Analysis of Processes of Deforming and Rupture of Materials at Strain Rate 102–105 s-1,” Doct. Dissertation in Tech. Sci. (Nizhny Novgorod, 1998).
G. R. Johnson and W. H. Cook, “A Constitutive Model and Data for Metals Subjected to Large Strains, High Strain Rates and High Temperatures,” in Proc. of the 7th Int. Symp. on Ballistic, Hague (Netherlands), April 19–21, 1983 (Hague, 1983), pp. 541–547.
H. Huh and W. J. Kang, “Crash-Worthiness Assessment of Thin-Walled Structures with the High-Strength Steel Sheet,” Int. J. Vehicle Design 30 (1/2), 1–21 (2002).
D. J. Allen, W. K. Rule, and S. E. Jones, “Optimizing Material Strength Constants Numerically Extracted from Taylor Impact Data,” Exp. Mech. 37 (3), 333–338 (1997).
G. R. Cowper and P. S. Symonds, “Strain Hardening and Strain Rate Effects in the Impact Loading of Cantilever Beams,” Appl. Math. Rep. (Brown Univ., Providence, 1958).
A. Yu. Konstantinov, “Experimental-Computational Investigation of the Behavior of Structural Materials under Dynamic Loading,” Candidate’s Dissertation in Tech. Sci. (Nizhnii Novgorod, 2007).
V. L. Kotov, A. Yu. Konstantinov, Yu. I. Kibets, et al., “Numerical Modeling of Plane–Parallel Displacement of Conical Strikers in an Elastoplastic Medium,” Probl. Prochn. Plastichn. 75 (4), 303–311 (2013).
T. Rodriguez, C. Navarro, and V. Sanchez-Galvez, “Splitting Tests: an Alternative to Determine the Dynamic Tensile Strength of Ceramic Materials,” J. Physique IV 4, 101–106 (1994).
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © A.M. Bragov, L.A. Igumnov, V.B. Kaidalov, A.Yu. Konstantinov, D.A. Lapshin, A.K. Lomunov, F.M. Mitenkov.
Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 56, No. 6, pp. 51–58, November–December, 2015.
Rights and permissions
About this article
Cite this article
Bragov, A.M., Igumnov, L.A., Kaidalov, V.B. et al. Experimental study and mathematical modeling of the behavior of St.3, 20Kh13, and 08Kh18N10T steels in wide ranges of strain rates and temperatures. J Appl Mech Tech Phy 56, 977–983 (2015). https://doi.org/10.1134/S0021894415060073
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S0021894415060073