Abstract
We have studied the variation in the phase composition, elemental composition, and microstructure of rolled titanium samples during thermal annealing in a nitrogen atmosphere at 1300, 1500, 1700, and 2000°C. The results demonstrate that the nitridation process can yield compact titanium nitride-based ceramics or TiN/TiN x /α-Ti〈N〉 heterostructures. X-ray diffraction data for the near-surface region of the samples before and after nitridation and those for cross-sectional fracture surfaces of heterostructures are used to infer orientation relationships between the TiN phase and α-Ti〈N〉 solid solution. Scanning electron microscopy results for cross-sectional fracture surfaces indicate that complete nitridation of the samples leads to the formation of a three-layer microstructure.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Titanium in Medicine: Material Science, Surface Science, Engineering, Biological Responses and Medical Applications, Brunette, D.M., Ed., New York: Springer, 2001.
Cyster, L.A., Grant, D.M., Parker, K.G., and Parker, T.L., The effect of surface chemistry and structure of titanium nitride (TiN) films on primary hippocampal cells, Biomol. Eng., 2002, vol. 19, pp. 171–175.
Tribology of Engineered Surfaces, in Wear Materials, Mechanisms and Practice, Stachowiak, G.W., New York: Wiley, 2005.
Toth, L.E., Transition Metal Carbides and Nitrides, New York: Academic, 1971.
Kiuchi, M., Tomita, M., Fujii, K., Satou, M., and Shimizu, R., Titanium nitride crystal growth with preferred orientation by dynamic mixing method, Jpn. J. Appl. Phys., 1987, vol. 26, no. 6, pp. L938–L940.
Ingo, G.M., Kaciulis, S., Mezzi, A., Valente, T., Casadei, F., and Gusmanoa, G., Characterization of composite titanium nitride coatings prepared by reactive plasma spraying, Electrochim. Acta, 2005, vol. 50, pp. 4531–4537.
Danek, M., Liao, M., Tseng, J., Littau, K., Saigal, D., Zhang, H., Mosely, R., and Eizenberg, M., Resistivity reduction and chemical stabilization of organometallic chemical vapor deposited titanium nitride by nitrogen of plasma, Appl. Phys. Lett., 1996, vol. 68, no. 7, pp. 1015–1016.
Fix, R.M., Gordon, R.G., and Hoffman, D.M., Synthesis of films by atmospheric pressure chemical vapor deposition using amido and imido titanium(IV) compounds as precursors, Chem. Mater., 1990, vol. 2, pp. 235–241.
Bendavid, A., Martin, P.J., Wang, X., Wittling, M., and Kinder, T.J., Deposition and modification of titanium nitride by ion assisted arc deposition, J. Vac. Sci. Technol., A, 1995, vol. 13, pp. 1658–1664.
Calka, A., Formation of titanium and zirconium nitrides by mechanical alloying, Appl. Phys. Lett., 1991, vol. 59, no. 13, pp. 1568–1569.
Castro, D.T. and Ying, J.Y., Synthesis and sintering of nanocrystalline titanium nitride, Nanostruct. Mater., 1997, vol. 9, pp. 67–70.
Shin, D.H., Hong, Y.C., and Uhm, H.S., Production of nanocrystalline titanium nitride powder by atmospheric microwave plasma torch in hydrogen/nitrogen gas, J. Am. Ceram. Soc., 2005, vol. 88, no. 10, pp. 2736–2739.
Marin-Ayral, R.M., Pascal, C., Martinez, F., and Tedenac, J.C., Simultaneous synthesis and densification of titanium nitride by high pressure combustion synthesis, J. Eur. Ceram. Soc., 2000, vol. 20, pp. 2679–2684.
Yang, X., Li, C., Yang, L., Yan, Y., and Qian, Y., Reduction-nitridation synthesis of titanium nitride nanocrystals, J. Am. Ceram. Soc., 2003, vol. 86, no. 1, pp. 206–208.
Ramanuja, N., Levy, R.A., Dharmadhikari, S.N., Ramos, E., Pearce, C.W., Menasian, S.C., Schamberger, P.C., and Collins, C.C., Synthesis and characterization of low pressure chemically vapor deposited titanium nitride films using TiCl4 and NH3, Mater. Lett., 2002, vol. 57, pp. 261–269.
Fix, R.M., Gordon, R.G., and Hoffman, D.M., Synthesis of thin films by atmospheric pressure chemical vapor deposition using amido and imido titanium(IV) compounds as precursors, Chem. Mater., 1990, vol. 2, pp. 235–241.
Kuznetsov, K.B., Solntsev, K.A., and Chernyavskii, A.S., RF Patent 2 337 058, 2008.
Diagrammy sostoyaniya dvoinykh metallicheskikh sistem. Spravochnik (Phase Diagrams of Binary Metallic Systems: A Handbook), Lyakishev, N.P., Ed., Moscow: Mashinostroenie, 1996
Kovalev, I.A., Kuznetsov, K.B., Zufman, V.Yu., Ogarkov, A.I., Shevtsov, S.V., Kannykin, S.V., Chernyavskii, A.S., and Solntsev, K.A., High-temperature titanium nitridation kinetics, Inorg. Mater., 2016, vol. 52, no. 12, pp. 1230–1234.
Pecharsky, V.K. and Zavalij, P.Y., Fundamentals of Powder Diffraction and Structural Characterization of Materials, Berlin: Springer, 2009.
Petříček, V., Dušek, M., and Palatinus, L., Crystallographic computing system JANA2006: general features, Z. Kristallogr., 2014, vol. 229, no. 5, pp. 345–352.
Höche, D. Schikora, H., et al., Tin-coating formation by pulsed Nd:YAG laser irradiation of titanium in nitrogen, J. Coat. Technol. Res., 2008, vol. 5, no. 14, pp. 505–512.
Samsonov, G.V., Nitridy (Nitrides), Kiev: Naukova Dumka, 1969.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © S.V. Shevtsov, I.A. Kovalev, A.I. Ogarkov, S.V. Kannykin, D.V. Prosvirnin, A.S. Chernyavskii, K.A. Solntsev, 2018, published in Neorganicheskie Materialy, 2018, Vol. 54, No. 3, pp. 321–326.
Rights and permissions
About this article
Cite this article
Shevtsov, S.V., Kovalev, I.A., Ogarkov, A.I. et al. Structure and Hardness of Ceramics Produced through High-Temperature Nitridation of Titanium Foil. Inorg Mater 54, 295–300 (2018). https://doi.org/10.1134/S0020168518030135
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S0020168518030135