Abstract
We have studied the microstructure formation in composite cement materials consisting of amorphous calcium phosphate and chitosan and reinforced with sodium alginate granules, their compressive strength, and the kinetics of their dissolution in an isotonic solution. Hardening in air allowed us to obtain a cement stone with a strength of up to 18 MPa and limiting strain of 6–8%. During hardening in simulated body fluid, the maximum strength decreased to 0.8 MPa, and the strain increased to 25–30%, which was due to the dissolution of the granules and the increase in the elasticity of the chitosan framework. The calcium ion release to the isotonic solution varied nonmonotonically, with a maximum in the initial stage of hardening. The cements are intended for the fabrication of porous matrices in bone tissue regeneration.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Hench, L.L. and Polak, J.M., Third-generation biomedical materials, Science, 2002, vol. 295, pp. 1014–1017.
Safronova, T.V. and Putlyaev, V.I., Medical inorganic materials research in Russia: calcium phosphate materials, Nanosist.: Fiz., Khim., Mat., 2013, vol. 4, no. 1, pp. 24–47.
Barinov, S.M. and Komlev, V.S., Calcium Phosphate Based Bioceramics for Bone Tissue Engineering, Zurich: Trans Tech, 2008.
Barinov, S.M. and Komlev, V.S., Biokeramika na osnove fosfatov kal’tsiya (Calcium Phosphate-Based Bioceramics), Moscow: Nauka, 2014.
Takagi, S. and Chow, L., Formation of macropores in calcium-phosphate cement implants, J. Dent. Res., 1995, vol. 74, p. 559.
Barralet, J.E., Grover, L., Gaunt, T., Wright, A.J., and Gibson, I.R., Preparation of macroporous calcium phosphate cement tissue engineering scaffolds, Biomaterials, 2002, vol. 23, pp. 3063–3072.
Habraken, W.J.E.M., de Jonge, L.T., Wolke, J.G.C., Yubao, L., Mikos, A.G., and Jansen, J.A., Introduction of gelatin microspheres into an injectable calcium phosphate cement, J. Biomed. Mater. Res. A, 2008, vol. 87, pp. 643–655.
Markovic, M., Takagi, S., and Chow, L.C., Formation of macropores in calcium phosphate cements through the use of mannitol crystals, Key Eng. Mater., 2001, vols. 192–195, pp. 773–776.
Takagi, S. and Chow, L.C., Formation of macropores in calcium phosphate cement implants, J. Mater. Sci. Mater. Med., 2001, vol. 12, pp. 135–139.
Smirnov, V.V., Porous cements for bone tissue defect filling, Materialovedenie, 2009, no. 8, pp. 16–19.
Nud’ga, L.A., Chitin and chitosan derivatives and their properties, Khitin i khitozan. Poluchenie, svoistva i primenenie (Preparation, Properties, and Applications of Chitin and Chitosan), Skryabin, K.G., Ed., Moscow: Tsentr Bioinzheneriya Ross. Akad. Nauk, 2013.
Khitozan (sbornik statei) (Chitosan: A Collection of Papers), Skryabin, K.G. et al., Eds., Moscow: Tsentr Bioinzheneriya Ross. Akad. Nauk, 2013.
Fedotov, A.Yu., Barinov, S.M., Teterina, A.Yu., Fadeeva, I.V., and Komlev, V.S., Composite bone cement in the calcium phosphates-chitosan system, Dokl. Chem., 2013, vol. 448, no. 1, pp. 68–70.
Fedotov, A.Yu., Komlev, V.S., Teterina, A.Yu., Barinov, S.M., and Fadeeva, I.V., Deformable bone cements in the calcium phosphate-chitosan system, Materialovedenie, 2013, no. 5, pp. 44–48.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © A.Yu. Teterina, A.Yu. Fedotov, A.A. Egorov, S.M. Barinov, V.S. Komlev, 2015, published in Neorganicheskie Materialy, 2015, Vol. 51, No. 4, pp. 449–452.
Rights and permissions
About this article
Cite this article
Teterina, A.Y., Fedotov, A.Y., Egorov, A.A. et al. Microstructure formation in porous calcium phosphate-chitosan bone cements. Inorg Mater 51, 396–399 (2015). https://doi.org/10.1134/S0020168515040172
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S0020168515040172