Abstract
It is well known that the polarization of a linearly polarized (LP) light would rotate after passing through a single layer graphene under the bias of a perpendicular magnetostatic field. Here we show that a corresponding phase shift could be expected for circularly polarized (CP) light, which can be engineered to design the circular polarization sensitive devices. We theoretically validate that an ultrathin graphene-based absorber with the thickness about λ/76 can be obtained, which shows efficient absorption >90% within incident angles of ±80°. The angle-independent phase shift produced by the graphene is responsible for the nearly omnidirectional absorber. Furthermore, a broadband absorber in frequencies ranging from 2.343 to 5.885 THz with absorption over 90% is designed by engineering the dispersion of graphene.
Similar content being viewed by others
Introduction
Graphene-based absorbers have attracted immense research attentions because of the advantages of ultrathin profile, highly thermal transport and fast external excitation-response1,2,3,4,5,6. When resorting to the localized surface plasmon polariton (LSPP) resonance1, the surface plasmon polariton (SPP) transmission loss2 or the cavity resonance3,4, efficient absorption has been obtained in many graphene-based structures. Graphene is the mono-atomic carbon material described by the two-dimensional (2D) Dirac-like equation7. Owing to the gapless energy band8,9, graphene shows unique properties that do not exist in conventional conducting materials, such as quantum Hall effect10,11, giant Faraday rotation12,13 and Kerr effect14,15, leading to many photo- and magneto-electric applications16,17,18. Faraday rotation, the polarization rotation of the plane wave when passing through the transparent medium in the perpendicular magnetostatic field, is an important phenomenon of the magneto-optic effect of the linearly polarized (LP) light, which naturally originates from the circular motion of the conducting electrons in the 2D graphene sheet. As known to all, the circularly polarized (CP) light can be decomposed into two orthotropic LP light. When the graphene sheet is illuminated by a CP light at normal direction and biased by a perpendicular magnetostatic field, a phase shift is expected across the graphene, which bears similar essence as the geometric phase in metasurface19,20. By reasonably engineering the phase shift, kinds of the magneto-controlled devices can be designed, including the circular polarization sensitive absorbers.
For the traditional sandwich-type absorbers, suitable impedance match between input impedance and air impedance and phase difference between incident and reflected waves are necessary to achieve perfect absorption. In the following, the phase difference is mainly considered while impedance match can be achieved easily by doping or loading the resistive elements21,22,23,24. In the graphene-based absorber, the total phase difference φtotal = 2φscreen + 2φd′ + π between incident and reflected light contains three parts: the phase shift caused by the screen φscreen, the propagation phase delay in the dielectric space φd′ (d′ is the relative thickness of the graphene-based absorber) and π phase shift of the metallic mirror. The sign of φscreen is decided by the capacitive or inductive features of the screen, which plays a crucial role in guaranteeing the efficient absorption.
In this work, we analyze the effect of the phase shift produced by the graphene screen in designing various CP light absorbers. The advantages of the absorber rely on the magnetic circular dichroism and the adjustable absorption property by changing the magnetostatic bias or the chemical potential (Fermi energy). To realize the omnidirectional absorption, the phase shift φscreen should be the dominant component of the total phase difference. The simulation results show that the left-handed circularly polarized (LCP) incident light within the angle range of ±80° is efficiently absorbed by the graphene structure with a thickness of about λ/76 (λ is the wavelength of the incident light), while almost all the right-handed circularly polarized (RCP) incident light is reflected. The absorption mechanism is different from the cavity resonance in the nanovoids25,26 and the magnetic coupling in the metamaterial absorbers27,28,29. Moreover, a broadband absorber can be designed using the phase shift to broaden the operation frequency range. The absorption is above 90% in the region of 2.343 to 5.885 THz.
Results
Phase shift of the grapheme
The conductivity is usually adopted to describe the electromagnetic characteristic of the 2D graphene sheet. In the low frequency region, the interband transition is dominant in the electron motion of the graphene and the conductivity is well approximated by the Drude model30. Under the control of the magnetostatic bias B, the conductivity is anisotropic with items in the off-axis diagonal31,32. The tensor expression for the linear polarization is [σ] = (σxx, σxy; σyx, σyy) with
where D is the Drude weight, γ is the scattering rate, is the cyclotron frequency, uc is the chemical potential, vF is the Fermi velocity and e is the electron charge. For the CP incident light, the conductivity of the graphene is calculated as33:
where the signs ‘+’ and ‘−’ stand for RCP and LCP light, respectively. Furthermore, surface impedances can be accurately written as:
which can be considered as the superposition of the polarization-independent resistance R = πγ/2D and the frequency-dependent inductive component X± = π(ω ± ωc)/2D.
In the following, we consider the transmission at the interface of the graphene and the semi-infinite non-magnetic dielectric space with a refractive index of n. According to the metasurface-assisted Fresnel’s equation (MAFE)34, the phase shift can be calculated as:
where Z0 is the impedance of the uniform graphene for B = 0 Tesla. Clearly, the phase shifts for RCP and LCP light are different, which could be combined to obtain the Faraday rotation angle:
which is different but similar to the expression given in previous article12.
A shown in Fig. 1, the phase shift induced by the graphene sheet can be regarded to be equivalent to the accumulated phase in the propagation of light with a distance of d′ = φscreen/kn in the dielectric space. Obviously, the phase shift is intrinsically related to the relative thickness of the absorber.
Ultrathin and omnidirectional absorber
Designing an efficient and omnidirectional absorber with an ultrathin profile with traditional approaches is challenging, since the electromagnetic coupling and the resonance usually become much weaker for smaller mode area. The absorbers based on the magnetic resonance are nearly angle-independent29. However, further reduction of the thickness seems to be not a trivial thing. Here we show that it is possible to construct an ultrathin and omnidirectional absorber using the phase shift produced by the graphene sheet.
In principle, to obtain perfect absorption, the resistance R of the graphene must be equal to the real part of the complex impedance of the screen for the ideal absorber Zideal = Z0/(1 + incot(knd)) (k is the wave vector and d is the thickness of the space)18. Hence, the relative thickness d′ of the graphene-based absorber can be expressed as:
The minimal value of R is expected for achieving the ultrathin absorber. Since R is reduced as 1/γ or uc increases, the minimal value of γ and the maximal value of uc are required. In this case, γ = 0.2 meV is adopted from the theoretical estimation35 and uc is set as 1 eV. The minimal value of R is obtained as 2.57 Ω per square and d′ is about λ/76. Then, phase match is considered. For an absorber with the dielectric space of n = 1.45 and the given thickness d′ = λ/76, the phase components are calculated as the propagation phase φd′ = knd′ = 0.038π and the phase shift φscreen = arg(Im(t)/Re(t)) = −0.4114π, where t is the transmission of the LCP light passing through the ideal screen covering on the semi-infinite dielectric material (φscreen = 0.4102π for the RCP light). The negative phase shift means that only the LCP incident light can be absorbed. Since the phase shift is relative to the direction of the magnetic field, the absorption behaviors for the two incident light are reciprocal by changing the direction of the magnetic field.
Subsequently, the negative phase shift is utilized to demonstrate that the LCP light absorber can be achieved. The key point is whether the phase shift can be realized by the graphene under the magnetostatic bias. Figure 2 depicts the phase shift as the function of the frequency within 0~1 THz and the magnetostatic bias in the range of 0~10 Tesla. Clearly, arbitrary values within ±0.4189π, including the desired value of −0.4114π, can be obtained by tuning the bias. The magnetic bias has an almost linear relationship with the frequency in the given phase shift range, which can be derived as:
For the given parameters and the nonzero thickness, the second term is a constant. Taking the resonant frequency of 0.55 THz for instance, the desired magnetic field and the thickness of the space are B = 7.12 Tesla and d′ = 7.146 μm, respectively.
To validate the above conclusion, theory results are obtained using a transfer matrix method (TMM) coded in MATLAB software. As illustrated in Fig. 3a, the theory results show that the perfect absorption of the LCP light appears at 0.55 THz as expected. The absorption bandwidth is about 5.53% with the absorption over 90%. However, the RCP light is mostly reflected within 0.1~0.9 THz. The different absorption around 0.55 THz for LCP and RCP light indicate that the absorber is circular polarization-sensitive. Furthermore, the model of the graphene-based absorber is constructed using the commercial electromagnetic simulation software CST 2013. The simulation results shown in Fig. 3a agree well with the theory results. Significantly, we note that if the resonant frequency becomes lower, the required magnetic field will be reduced as illustrated in Fig. 2.
The angle-dependence of the ultrathin graphene-based absorber is also investigated. Propagation direction and electric field rotational direction of the LCP light are assumed to obey the left-handed rule. The LCP light would be absorbed or reflected as LCP or RCP light when illuminating the absorber. As presented in Fig. 3b, the reflection coefficient r1 describes the efficiency of the incident LCP light converted to RCP light for variable angles. Clearly, the RCP light could be hardly found within ±60° and a peak and a dip respectively appear at 0.6 THz and 0.8 THz as the incident angle increases. Figure 3c shows the coefficient r2 of the LCP reflected light for different incident angles and the inset gives the minimal values of the reflection coefficients in details. The maximum value is only about 0.15 when the angle is 75°. The results validate that the absorber would strongly suppress the transformation from the LCP incident light to the LCP reflected light around 0.55 THz. Considering the metal layer at the backside of the substrate, the transmission is zero and the absorption is calculated as , as shown in Fig. 3d. Although there is a small blue shift of the resonant frequency as the incident angle increases, the absorber still exhibits rather high absorption. The inner mechanism is originated from the interference of waves between the graphene layer and the metal mirror, which is different from the cavity resonance in the nanovoids and the magnetic coupling in the metamaterial absorbers26,29. Moreover, the phase shift caused by the screen, rather than the propagation phase delay in the dielectric space, is dominant for the resonant frequency. The ratio φscreen/(φscreen + φd′) is about 91.5% at the normal incidence. The thicknesses of the graphene and the dielectric spacer are much smaller than the incident wavelength and the total phase difference changes little for different incident angles, leading to excellent wide-angle absorption property.
Broadband CP light absorber
As shown in Eq. 3, the graphene sheet exhibits the inductive or capacitive dispersion characteristics at the frequency range below or beyond ωc for the CP incident light. Thus, a dual-frequency resonance of the graphene is feasible to broaden the operation region. Different from the previous ultrathin absorber, the corresponding parameters are optimized as uc = 0.34 eV and γ = 0.7 meV36. The resistance R is about 262.5 Ω per square and the relative thickness d′ is about λ/7.96, which is close to λ/4n. By setting the resonant frequency to be 3 THz, the desired magnetic field is calculated as 8.78 Tesla. Figure 4a is the theory and simulation results, which show that the absorption A for the LCP light is larger than 90% within 2.343 to 5.885 THz, while the RCP light is mostly reflected in the range of 0 to 8 THz. As illustrated in Fig. 4b, the red dashed line is the phase shift caused the graphene while the black line is the desired phase shift produced by the ideal screen for the perfect absorption29. Three intersections indicate that good phase matches are achieved at 3 THz, 4.1 THz and 5.196 THz. Considering the resistance match presented in Fig. 4c, two intersections at 3 THz and 5.196 THz are realized with nearly perfect absorption. Figure 4d shows the absorption is the function of the frequency and the magnetostatic bias. Obviously, the broadband absorption can be tuned by the magnetostatic bias.
Discussion
Based the above results, the angle-dependence of the broadband LCP light absorber is also simulated, as presented in Fig. 5. The two resonant frequency points will shift as the incident angle increases. The absorption A is larger than 90% in the range of 0–45°, while the absorption will rapidly decrease due to the impedance mismatch when the incident angle is out of the range of 45°. We note that the absorption property of the broadband absorber is similar to the Salisbury screen.
In summary, we investigated the effect of the phase shift of the graphene originated from the Faraday rotation in designing the CP light sensitive absorbers under the perpendicular magnetostatic field. An ultrathin and omnidirectional absorber with a thickness about λ/76 can be realized when the phase shift induced by the graphene sheet is the dominant component of the total phase difference. Moreover, considering the inductive or capacitive characteristics of the graphene at the two sides of the cyclotron frequency, a broadband circular polarization sensitive absorber is obtained by inducing the dual-frequency resonance. The phase shift is also relative to the direction of the magnetic field, thus the absorption behaviors of LCP and RCP light are reciprocal by changing the direction of the magnetic field.
Method
The theory results are obtained using the transfer matrix method (TMM) coding in MATLAB software, while the simulation results are achieved using the commercial electromagnetic simulation software CST 2013 based on the Finite Element Method (FEM). In the simulation, the graphene is considered as the thin layer with a thickness of δ = 10 nm. The ‘electric gyrotropic’ is described as the dispersion model of the thin graphene layer. The plasmon frequency is independent on the magnetic field. The collision frequency and cyclotron frequency are 2πγ and wc, respectively.
Additional Information
How to cite this article: Yang, K. et al. Circular polarization sensitive absorbers based on graphene. Sci. Rep. 6, 23897; doi: 10.1038/srep23897 (2016).
References
Nikitin, A. Yu., Guinea, F., Garcia-Vidal, F. J. & Martin-Moreno, L. Surface plasmon enhanced absorption and suppressed transmission in periodic arrays of graphene ribbons. Phys. Rev. B 85, 081405 (2012).
Ferreira, A. & Peres, N. M. R. Complete light absorption in graphene-metamaterial corrugated structures. Phys. Rev. B 86, 205401 (2012).
Thongrattanasiri, S., Koppens, F. H. L. & Abajo, F. J. G. de Complete optical absorption in peridically patterned graphene. Phys. Rev. Lett. 108, 047401 (2012).
Alaee, R., Farhat, M., Rockstuhl, C. & Lederer, F. A perfect absorber made of a graphene micro-ribbon metamaterial. Opt. Express 20, 28017–28024 (2012).
Xu, B.-Z., Gu, C.-Q., Li, Z. & Niu, Z.-Y. A novel structure for tunable terahertz absorber based on graphene. Opt. Express 21, 23803–23811 (2013)
Andryieuski, A. & Lavrinenko, A. V. Graphene metamaterials based tunable terahertz absorber: effective surface conductivity approach. Opt. Express 21, 9144–9155 (2013).
Novoselov, K. S. et al. Two-dimensional gas of massless Dirac fermions in graphene. Nature 438, 197–200 (2005).
Geim, A. K. & Novoselov, K. S. The rise of graphene. Nat. Mater. 6, 183–191 (2007).
Geim, A. K. Graphene: status and prospects. Science 324, 1530–1534 (2009).
Gusynin, V. P. & Sharapov, S. G. Unconventional integer quantum hall effect in graphene. Phys. Rev. Lett. 95, 146801 (2005).
Zhang, Y., Tan, Y.-W., Stormer, H. L. & Kim, P. Experimental observation of the quantum hall effect and berry’s phase in graphene. Nature 438, 201–204 (2005).
Crassee, I. et al. Giant Faraday rotation in single-and multilayer graphene. Nature Phys. 7, 48–51 (2011).
Chin, J. Y. et al. Nonreciprocal plasmonics enables giant enhancement of thin-film Faraday rotation. Nat. Commun. 4, 1599 (2013).
Tse, W.-K. & MacDonald, A. H. Giant magneto-optical kerr effect and universal Faraday effect in thin-film topological insulators. Phys. Rev. Lett. 105, 057401 (2010).
Nandkishore, R. & Levitov, L. Polar Kerr effect and time reversal symmetry breaking in bilayer graphene. Phys. Rev. Lett. 107, 097402 (2011).
Echtermeyer, T. J. et al. Photothermoelectric and photoelectric contributions to light detection in metal-graphene-metal photodetectors. Nano Lett. 14, 3733–3742 (2014).
Zhang, Z., Chen, C. & Guo, W. Magnetoelectric effect in graphene nanoribbons on substrates via electric bias control of exchange splitting. Phys. Rev. Lett. 103, 187204 (2009).
Pu, M. et al. Strong enhancement of light absorption and highly directive thermal emission in graphene. Opt. Express 21, 11618–11627 (2013).
Pu, M. et al. Spatially and spectrally engineered spin-orbit interaction for achromatic virtual shaping. Sci. Rep. 5, 9822 (2015).
Pu, M. et al. Catenary optics for achromatic generation of perfect optical angular momentum. Sci. Adv. 1, e1500396 (2015).
Pu, M. et al. Engineering heavily doped silicon for broadband absorber in the terahertz regime. Opt. Express 20, 25513–25519 (2012).
Xu, W. & Sonkusale, S. Microwave diode switchable metamaterial reflector/absorber. Appl. Phys. Lett. 103, 031902 (2013).
Wang, M. et al. Electrical tunable L-band absorbing material for two polarisations. Electron. Lett. 48, 1002–1003 (2012).
Plum, E. et al. Metamaterials: optical activity without chirality. Phys. Rev. Lett. 102, 113902 (2009).
Teperik, T. V. et al. Omnidirectional absorption in nanostructured metal surfaces. Nat. Photon. 2, 299–301 (2008).
Wang, M. et al. Truncated spherical voids for nearly omnidirectional optical absorption. Opt. Express 19, 20642–20649 (2011).
Landy, N. I., Sajuyigbe, S., Mock, J. J., Smith, D. R. & Padilla, W. J. Perfect metamaterial absorber. Phys. Rev. Lett. 100, 207402 (2008).
Tao, H. et al. Highly flexible wide angle of incidence terahertz metamaterial absorber: design, fabrication, and characterization. Phys. Rev. B 78, 241103 (2008).
Pu, M. et al. Design principles for infrared wide-angle perfect absorber based on plasmonic structure. Opt. Express 19, 17413–17420 (2011).
Horng, J. et al. Drude conductivity of Dirac fermions in graphene. Phys. Rev. B 83, 165113 (2011).
Ubrig, N. et al. Fabry-Perot enhanced Faraday rotation in graphene. Opt. Express 21, 24736–24741 (2013).
Crassee, I. et al. Intrinsic terahertz plasmons and magnetoplasmons in large scale monolayer graphene. Nano Lett. 12, 2470–2474 (2012).
Wang, M. et al. Circular dichroism of graphene-based absorber in static magnetic field. J. Appl. Phys. 115, 154312 (2014).
Luo, X. Principles of electromagnetic waves in metasurfaces. Sci. China-Phys. Mech. Astron. 58, 594201 (2015).
Hanson, G. W. Dyadic Green’s functions and guided surface waves for a surface conductivity model of graphene. J. Appl. Phys. 103, 064302 (2008).
Li, Z. Q. et al. Dirac charge dynamics in graphene by infrared spectroscopy. Nature Phys. 4, 532–535 (2008).
Acknowledgements
We acknowledge the financial support by 973 Program of China under contract No. 2013CBA01700 and the National Natural Science Foundation of China under contract No. 61138002.
Author information
Authors and Affiliations
Contributions
K.P.Y., M.W. and M.B.P. wrote the first draft of the manuscript. X.Y.W., H.G. and C.G.H. revised the manuscript. X.G.L. conceived the original idea and supervised the project. All the authors have analyzed and discussed the results thoroughly and contributed to the writing of the manuscript.
Corresponding author
Ethics declarations
Competing interests
The authors declare no competing financial interests.
Rights and permissions
This work is licensed under a Creative Commons Attribution 4.0 International License. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in the credit line; if the material is not included under the Creative Commons license, users will need to obtain permission from the license holder to reproduce the material. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/
About this article
Cite this article
Yang, K., Wang, M., Pu, M. et al. Circular polarization sensitive absorbers based on graphene. Sci Rep 6, 23897 (2016). https://doi.org/10.1038/srep23897
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/srep23897
- Springer Nature Limited
This article is cited by
-
Investigation of a Near-Perfect Quad-Band Polarization-Insensitive Metamaterial Absorber Based on Dual-T Circular Shaped Resonator Array Designed on a Silicon Substrate for C-, X- and Ku-bands Applications
Silicon (2023)
-
Infrared graphene assisted multi-band tunable absorber
Optical and Quantum Electronics (2022)