Abstract
Cells sense and interpret mechanical cues, including cell-cell and cell-substrate interactions, in the microenvironment to collectively regulate various physiological functions. Understanding the influences of these mechanical factors on cell behavior is critical for fundamental cell biology and for the development of novel strategies in regenerative medicine. Here, we demonstrate plasma lithography patterning on elastomeric substrates for elucidating the influences of mechanical cues on neuronal differentiation and neuritogenesis. The neuroblastoma cells form neuronal spheres on plasma-treated regions, which geometrically confine the cells over two weeks. The elastic modulus of the elastomer is controlled simultaneously by the crosslinker concentration. The cell-substrate mechanical interactions are also investigated by controlling the size of neuronal spheres with different cell seeding densities. These physical cues are shown to modulate with the formation of focal adhesions, neurite outgrowth and the morphology of neuroblastoma. By systematic adjustment of these cues, along with computational biomechanical analysis, we demonstrate the interrelated mechanoregulatory effects of substrate elasticity and cell size. Taken together, our results reveal that the neuronal differentiation and neuritogenesis of neuroblastoma cells are collectively regulated via the cell-substrate mechanical interactions.
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Introduction
Human neuroblastoma is a pediatric tumor of the neural crest and heterogeneous cell composition is observed in both tumors and tumor-derived cell lines1. Neuroblastoma is one of the few malignancies demonstrating spontaneous differentiation and regression to a benign state2 and is capable of self-renewal and generating partially differentiated progenitor cells, characteristics of cancer stem cells1. Neuronal differentiation of neuroblastoma cells can be induced by retinoic acid3. The neuronal phenotype (N-type) is characterized by highly refractive cells, reduced cell growth and the formation of distinct neurites (neuritogenesis). The neuronal cells adhere weakly to the substrate and grow as clumps of cells. For instance, SH-SY5Y, a neuroblastoma cell line, is an in vitro model for investigating the early stages of neuronal differentiation and neural tissue engineering strategies4,5,6,7. Differentiation of SH-SY5Y induced pharmacologically has also been studied as a model of dopaminergic neurons for Parkinson's disease research8. Increased understanding and the ability to induce neuroblastoma differentiation may have important implications in regenerative medicine and disease therapeutics.
Cell behavior, such as development and regeneration, is often influenced by cell-cell or cell-microenvironment interactions9,10. Mechanical cues are known to modulate the differentiation of neuroblastoma and stem cells. For instance, neurite outgrowth of neuroblastoma cells can be promoted and guided by substrate stiffness11,12,13 and spatial pattering14,15,16. Notably, a combination of multiple mechanical factors may modulate cell behavior (e.g., differentiation of human mesenchymal stem cells) in a complex manner17,18. However, there is a paucity of knowledge on the relationship between different mechanoregulatory factors and the process by which neuronal differentiation is regulated by these mechanical cues remains poorly understood. Since cells naturally experience multiple mechanical cues in the microenvironment, a comprehensive investigation on the effects of these factors will improve our fundamental understanding in neuronal differentiation and may facilitate the design of translational biomaterials and regenerative medicine in the future.
Cell patterning techniques, such as contact printing and photolithography, are available for biomechanical studies19. To allow for simultaneous control of the substrate elasticity and geometric constraint, cell patterning techniques should be compatible with substrate materials that have tunable elasticity. Another important consideration in selecting a patterning technique is the stability of the patterns. Cell-mediated degradation and physical desorption of the extracellular matrix and cell repellent molecules can occur in long term studies that take days to weeks, such as tissue morphogenesis and cell differentiation20. To address these issues, plasma lithography21,22,23 has been developed for investigating tissue development, intercellular communication and migration in confined environments24,25,26,27,28. The technique has rapid processing time (10 min), long-term stability (more than 2 months)28 and high spatial resolution (100 nm)22. Plasma lithography is one of a few techniques specialized for patterning polymeric materials, which have a wide range of achievable mechanical and biochemical properties. Nevertheless, the potential of plasma lithography in patterning elastomeric materials, such as polydimethylsiloxane (PDMS) that are widely-used in microfluidic cell culture, cell traction force measurement and investigation of the effects of substrate stiffness29,30,31,32, has not been demonstrated. Plasma lithography patterning on elastomeric substrates will enable simultaneous control of substrate elasticity and geometric constraints, allowing for the investigation of neuritogenesis and neuroblastoma differentiation.
In this study, we present plasma lithography of elastomeric materials to simultaneously control substrate elasticity, geometric constraint and cell size for elucidating the influences of the cell-substrate mechanical interactions on the differentiation of neuroblastoma cells. We perform plasma lithography patterning on PDMS substrates with adjustable elasticity by controlling the PDMS crosslinker concentration. The plasma lithography creates stable patterns throughout the duration of the experiment and allows us to investigate the effects of the geometric confinement on neuronal sphere differentiation, which requires several days. We apply the approach to study retinoic acid-mediated neuronal differentiation and study the influences of mechanical factors on focal adhesion, neurite elongation and morphology of SH-SY5Y neuronal spheres. A computational biomechanical model is also developed to interpret the interrelated effects of geometric constraint, substrate stiffness and cell size on the cell-substrate mechanical interactions.
Results
Cellular patterning by plasma lithography on elastomeric substrates
Plasma lithography was applied to create surface patterns for geometric confinement of neuroblastoma cells. Plasma lithography patterning was performed by first fabricating a PDMS template followed by selective plasma treatment of the elastomeric substrate with the template (Fig. 1a). The template spatially shielded the substrate from plasma treatment and consequently only the unshielded areas were exposed and functionalized by plasma, creating patterns for cell attachment. To demonstrate the applicability of plasma lithography on PDMS substrates, line and network patterns were designed for studying neuronal differentiation. Figures 1b–c show patterns of PDMS templates and neuroblastoma cells confined in plasma-treated, hydrophilic areas of the substrates. The smallest pattern width for cell attachment was 10 μm. The value was larger than other cell types, e.g. fibroblasts, endothelial cells and myocytes (~1 μm)24,25,26,27,28. The large pattern width required for cell adhesion is consistent with the weak adhesion property of the N type cells. For smaller patterns, the cells either did not attach initially, or detached from the substrate after a short time. With an appropriate cell density (70–210 cells/mm2) and with retinoic acid treatment, the neuroblastoma cells formed neuronal spheres with neurite outgrowth (Supplementary Fig. S1). The neurites were extended along the plasma-treated patterns and did not go off the patterns in the duration of the experiment (up to 15 days). Cell attachment and neurite elongation could be guided through two-, three- and six-way connected networks (Fig. 1c). Line patterns with different widths were designed in this study to systematically investigate the effects of geometric constraints on neuronal differentiation. These results demonstrate that plasma lithography is capable of patterning neuroblastoma cells and neuronal spheres and provides an effective method for investigating geometric control of neuronal differentiation.
The influence of substrate elasticity on neuronal differentiation
To investigate the effects of substrate elasticity on neuronal differentiation, the elastic moduli of PDMS with different crosslinker concentrations were characterized. Figure 2a shows the Young's modulus of plasma-treated PDMS measured by atomic force microscopy. The stiffness increased with the crosslinker concentration at low values and maximized between 12.5% and 20.0%. The elasticity decreased with further increases in the crosslinker concentration (e.g., 33.3%). The measured elasticities were in good agreement with previous studies33. No significant differences (p > 0.1) were observed between samples with and without plasma treatment. According to the measurements, 5.0%, 12.5% and 33.3% PDMS with elasticities of 0.7 MPa, 2.6 MPa and 2.1 MPa were chosen in this study. As a reference, the Young's modulus of polystyrene tissue culture plates was 2.8 GPa34.
The morphology and the cell-substrate interaction of neuroblastoma cells on PDMS with different elasticities were characterized. A low density cell culture was applied to facilitate visualization and data analysis at the single cell level. It was observed that the average length of neurites increased with the substrate elasticity (Fig. 2b). Moreover, the number of focal adhesions and the percentage of cells with detectable focal adhesions increased with the substrate stiffness (Fig. 2c and d). Figure 2e shows representative images of neuroblastoma cells on PDMS with different elasticities. Notably, the neurite outgrowth and focal adhesion formation correlated with the elasticity, instead of the crosslinker concentration, supporting the notion that the observed effects were triggered mechanically. The dependence of elasticity on neuronal differentiation is consistent with a previous study using polyacrylamide hydrogel12 and supports the applicability of PDMS for investigating the mechanoregulation of neuronal differentiation.
The effects of geometric constraints on neuronal differentiation
To investigate the effects of geometric constraints on neuronal differentiation, line patterns with different dimensions were created on PDMS. Polystyrene tissue culture plates were applied as control. The dimensions of the patterns were verified by microscopic inspection of food dye solution wetting on plasma-treated areas and cells confined in the patterns (Fig. 3a and b). The neuroblastoma cells were cultured with an initial seeding density of 70 cells/mm2 and differentiated on patterns of 20 (23.3 ± 0.4), 40 (41.5 ± 0.4), 60 (62.3 ± 1.1) and 100 (101.7 ± 0.6) μm width created on 5%, 12.5% and 33.3% PDMS (Fig. 3c). Neuronal spheres with neurite outgrowth were formed in all patterns and substrate elasticities. Figure 4 shows the number of neurites and the directionality of neurite elongation along the line patterns with different widths. The number of neurites increased with the pattern width (Fig. 4a). Approximately 8 neurites on average were elongated from the neuronal spheres pattered on 100 μm width patterns, while only ~2 neurites were observed on 20 μm width patterns. Furthermore, neurites were confined along the pattern direction as the pattern width decreased (Fig. 4b). The percentage of neuroblastoma cells aligning within ±15 degrees (red dotted lines) from the patterns was measured (Fig. 4b, numbers in red). All neurites were aligned within 15 degrees with the pattern on 20 μm lines. Only 26% of neurites were aligned on 100 μm width patterns. Our results demonstrate that neurite outgrowth can be regulated by geometric constraints during neuronal differentiation.
Interrelated biomechanical effects of elasticity and geometric constraint
The effects of substrate elasticity and pattern dimension were analyzed simultaneously to explore their relationship on the differentiation of neuronal spheres and neuritogenesis. Increasing the substrate elasticity, as well as decreasing the pattern width, increased the average length of neurites (Fig. 5a–b). Interestingly, the influence of substrate elasticity and geometric constraint are interchangeable. For instance, the reduction of neurite length in a soft substrate could be compensated by a narrow pattern, which enhanced neurite elongation. These results suggest that the effects of geometric constraint and substrate elasticity on neuronal differentiation are interrelated.
To further characterize the coupled effects of geometric constraint and substrate elasticity, the distributions of neurite length were also analyzed (Fig. 5c and d). For a wide pattern (e.g., 100 μm), the mean neurite length was small and exhibited a narrow distribution (Fig. 5c). As the pattern width decreased, the distribution widened and shifted from left to right, indicating enhanced neurite elongation. Similar effects, including longer average neurite length and wider neurite length distributions, were observed for neuronal spheres patterned on stiffer substrates (Fig. 5d). Interestingly, the neurite length distributions for stiff substrates and narrow patterns were not Gaussian and were better described by bimodal distributions. The peak values and fractions of cells in each peak were determined by bimodal curve fitting (Supplementary Fig. S2). The first and second peaks were approximately at 60 μm and 100 μm, respectively. As the cell pattern width became narrower or the substrates become stiffer, the cell populations at each peak shifted to the right slightly and the portion of cells in the second peak increased (Supplementary Table 1 and 2). The distribution of neurite length provides additional evidence on the interrelated mechanoregulatory effects of substrate stiffness and geometric constraint.
The initial cell seeding density modulated the size of neuronal spheres, which influenced the cell-substrate mechanical interactions. The cell seeding density was therefore adjusted systematically to study the interrelated biomechanical effects of substrate elasticity and geometric constraint on neuronal differentiation (Fig. 6a). The cell seeding densities of 70, 140 and 210 cells/mm2, which formed stable neuronal spheres, were chosen. In this range, neuronal spheres with neurite outgrowth were formed along the patterns. As the cell seeding density increased from 70 cells/mm2 to 210 cells/mm2, the size of the neuronal spheres increased (Supplementary Fig. S3). The neuronal sphere dimension and the neurite length under different substrate elasticities, geometric constraints and cell seeding densities were measured systematically (Fig. 6b). The dimension of neuronal spheres generally increased with the cell seeding density. Similar to narrow patterns or stiff substrates, high cell seeding density (i.e., large neuronal spheres) enhanced neurite elongation. The influence of the cell seeding densities on the neuronal sphere dimension and the neurite length was particularly noticeable on soft substrates. Similarly, the length of neurites was also more sensitive to the seeding density in narrow patterns. These results collectively support the notion that the influence of substrate stiffness and geometric constraint are interrelated and jointly regulate the differentiation of neuronal spheres.
Computational biomechanical analysis
The coupled effects of geometric constraint, substrate elasticity and cell size suggest that the differentiation of neuronal spheres is regulated mechanically. A finite element model was developed to elucidate the interrelationship between these factors on the cell-substrate mechanical interactions (Fig. 7a). In the simulation, neuronal spheres were confined in patterns with different widths while maintaining a constant total area. The distributions of the first principal stress at the cell-substrate interface are shown in Fig. 7b, top. For a constant area, cells confined in a narrower pattern were elongated and experienced a larger stress, especially at the boundary (Fig. 7b, bottom). The shear stress along the longest axis at the cell-substrate interface was also estimated to illustrate the geometric effect on the cell-substrate mechanical interactions along the pattern direction (Fig. 7c). Therefore, the geometric constraint enhanced the cellular stress induced by cell traction. The effects of other factors on the cell-substrate mechanical interactions, including the cell size and the substrate elasticity, were also investigated. Increasing the cell size and therefore increasing the length of the longest axis, enhanced the cellular stress at the boundary. Similarly, a stiff substrate, which is known to increase the cell traction force35,36, enhanced the cellular stress at the cell-substrate interface (Fig. 7d). Taken together, the computational results support the notion that geometric constraint, substrate elasticity and cell size control neuronal differentiation via the cell-substrate mechanical interactions.
Discussion
In this study, plasma lithography patterned elastomeric substrates are reported to independently control the substrate elasticity, the geometric constraint and the cell dimension for studying the influences of the mechanical interactions between the neuronal spheres and the substrates. Technologically, this study represents the first systematic investigation using plasma lithography to control substrate stiffness, physical confinement and cell size simultaneously. Plasma lithography is rapid (10 min), simple (one-step process) and effective (does not require extracellular matrix protein coatings). Compared to physical absorption and self-assembly monolayer-based patterning techniques, plasma lithography is based on direct surface functionalization and has excellent stability for long-term cell studies. In our experiments, neuronal spheres formed by neuroblastoma cells were confined in the patterns throughout the duration of the experiment (up to 15 days). Furthermore, patterning on flat elastomeric substrates facilitates the observation of neurite outgrowth and avoids topographic effects on cell differentiation. In the future, other elastomeric materials (e.g., other silicone gel) can be incorporated to replace PDMS for achieving an extended range of elasticity37.
Plasma lithography allowed us to study the effects of several mechanoregulatory factors on the differentiation of neuroblastoma cells and neuronal spheres. Once the cells were treated with retinoic acid, the differentiated cells could be clearly distinguished from undifferentiated cells due to glaring differences in their neurite outgrowth (see Supplementary Fig. S1). In agreement with reported studies12, the substrate elasticity enhanced the outgrowth of actin-rich neurites during retinoic acid-mediated differentiation of neuroblastoma cells (Fig. 2). In addition to the differentiation of individual neuroblastoma cells, our results further demonstrated that the differentiation of neuronal spheres depends on the substrate elasticity (Fig. 3). To investigate the effect of the substrate elasticity, 5.0%, 12.5% and 33.3% PDMS with the elasticity of 0.7 MPa, 2.6 MPa and 2.1 MPa respectively were chosen in this study. Remarkably, the differentiation of neuronal spheres correlated with the substrate stiffness, instead of the crosslinker concentration, supporting that the observed effects are not related to the crosslinker concentration or chemical properties of PDMS, but mediated mechanically. Furthermore, the size and shape of the neuronal spheres were controlled by geometric constraint and the cell seeding density independently. The results showed neuroblastoma cells in the neuronal sphere collectively regulated the outgrowth and distribution of neurites depending on the geometry of the neuronal spheres (Fig. 4,5,6). Our biomechanical analysis suggested the substrate elasticity, the geometric constraint and the cell size collectively modulate the cell-substrate mechanical interactions to control neuronal differentiation (Fig. 7).
Analyzing the morphology of neuronal spheres revealed bimodal distributions of the neurite length, suggesting subpopulations of neuroblastoma cells may exist in the neuronal spheres. In fact, heterogeneity of neuroblastoma cells is well-documented in both tumors and tumor-derived cell lines1. Neuroblastic (N-type), substrate-adherent (S-type) and intermediate (I-type) cells have been characterized and these subtypes processed different differentiation and malignant potentials38. In particular, the I-type cells, which exhibit characteristics of caner stem cells, are subjected to intensive research. In our study, the bimodal distribution was particularly apparent for neuronal spheres on stiff substrates and narrow patterns. This observation may indicate the subtypes of neuroblastoma cells co-exist in the neuronal spheres and may have different mechanosensitivity. In conjunction with novel molecular probes and 3D imaging modularity39,40, the plasma lithography may represent a useful platform for elucidating their mechanosensitivity and relationship with cancer stem cells.
Our comprehensive techniques enable a systems approach for investigating the mechanoregulation of cells. Numerous studies have been reported on the effects on individual mechanical factors (e.g., matrix stiffness, shear stress, stretching, roughness and geometry) on cell behaviors. An outstanding challenge in the field is to understand the mechanoregulation from a systems perspective19,41. In this study, the interrelated effects of different factors can be understood collectively by the intercellular stress in the neuronal spheres as a result of the cell-substrate mechanical interaction. Computational biomechanical analysis was performed to elucidate the relationship between the geometry constraints, substrate stiffness and cell density. In particular, the cellular stress due to the cell-substrate mechanical interaction can be increased by stiffer substrates, narrow pattern widths and high cell seeding densities. The computational results are in good agreement with our experimental data. Importantly, our results highlight the importance of global mechanical structures when considering the mechanoregulation of biological systems and the influence of cell-substrate mechanical interactions. For instance, the mechanical traction force exerted on the surface by the migrating fronts of an epithelium is suggested to be a mechanical global entity42. Nevertheless, the exact molecular mechanisms by which multicellular structures sense and interpret the cell-substrate mechanical interactions remain poorly understood. Future investigation is warranted to clarify these issues. It is also possible that other mechanical factors, such as mechanical stretching, nanotopography and fluid shear stress, can be incorporated into the platform to decipher the mechanoregulation of neuronal differentiation.
Methods
Preparation of PDMS substrates with different elasticities
PDMS (Sylgard 184, Dow Corning Corp., MI) was used as the substrate for cell culture. The Young's modulus of PDMS was controlled by the ratio between the crosslinker and the polymer base. A range of crosslinker concentrations, from 3.3% to 33.3%, was applied. After thorough mixing of the base and the crosslinker, the solution (3 g) was poured into a 60 mm polystyrene culture dish (VWR) and baked for 2 hours at 75°C. The elasticities of plasma-treated and untreated PDMS (1 mm thick) were measured by atomic force microscopy (5500 AFM, N9410S, Agilent, CA) with tapping mode tips (NSC 15, Nanosensors, Neuchatel, Switzerland)43.
Plasma lithography
The PDMS template for plasma lithography was fabricated via photolithography of SU8 and PDMS molding. The template was placed on the substrate (0.5 mm thick) and exposed to atmospheric plasma (PDC-001, Harrick Plasma, NY) for 10 minutes. Due to physical shielding of the template, the substrate was selectively functionalized. A PDMS well was used to keep neuroblastoma cells in the patterned regions during seeding. The well was removed after allowing cells to attach for 3 hours. Retinoic acid (20.4 μL) was then added to the media (3 mL) to induce cell differentiation. The neuroblastoma cells were cultivated for 5 days and imaged.
Cell culture
Human neuroblastoma cells, SH-SY5Y, were obtained from American Type Culture Collection (ATCC CRL 2266, VA). Cells were maintained at 37°C, 100% humidity and 5% CO2 and seeded at 25–50% confluence. The cells were cultured according to ATCC guidelines. Cell seeding densities from 30 cells/mm2 to 350 cells/mm2 were tested and used in the experiments.
Immunostaining
The neuroblastoma cells were immunostained for F-actin with Alexa Fluor® 555 tagged phalloidin (Invitrogen, NY), vinculin for focal adhesions with monoclonal anti-vinculin antibodies conjugated with FITC (Sigma, MO) and nuclei with the ProLong® Gold antifade reagent containing DAPI (Invitrogen, NY). The cells were fixed with 3.7% formaldehyde (Polysciences, Inc., PA) for 10 minutes and permeabilized with 0.1% Triton X-100 (Astoria Pacific, OR) for 5 minutes. The cells were stained with phalloidin and anti-vinculin antibodies followed by the antifade reagents. A coverslip was placed over the cells and the edges were sealed with nail polish.
Microscopy and image analysis
Bright-field images were captured using an inverted microscope (TE2000-U, Nikon) with a SPOT camera (Diagnostic Instruments model 2.2.1). Fluorescence images were captured using an inverted microscope (Leica model DMI4000B) with a Cooke SensiCam camera (The Cooke Corp., MI). The cell images were analyzed using NIH ImageJ to measure the size of neuronal spheres, the length of neurites and the number of focal adhesions for each cell.
Computational biomechanical analysis
A three-dimensional computational model was developed to analyze the cellular stress distribution of neuronal spheres using a commercial finite element package (ANSYS 13). In the simulation, the cell traction force was imposed by applying a uniform thermal strain computationally44. Three factors, namely pattern width, cell seeding density and substrate elasticity were taken into account. To study the effects of geometric constraints, the cell area was considered constant for any seeding density. Cells with areas of 3600 or 4800 μm2 were confined in line patterns with 30, 40, 45, 50 and 60 μm widths. Two different thermal strains (as a result of 3 and 5°C temperature drops) were prescribed to the model to qualitatively represent the dependency of contractile force on the substrate elasticity45. To keep an equal mesh density in all cases, the element size was approximately 4 μm. The first principal stress and the shear stress along longest axis were calculated at the cell-substrate interface.
Statistics
Statistical analysis was performed by Student's t-test and two-way ANOVA test followed by post-hoc Duncan test. p < 0.05 was considered statistically significant. Each data point represents an average of ~50 cells per each experiment from three independent experiments. Bimodal curve fitting was performed by OriginPro 8.5 with the multiple peak fit method to measure the distribution of the neurite length under different conditions.
References
Ross, R. A. & Spengler, B. A. Human neuroblastoma stem cells. Semin Cancer Biol 17, 241–247, 10.1016/j.semcancer.2006.04.006 (2007).
Maris, J. M., Hogarty, M. D., Bagatell, R. & Cohn, S. L. Neuroblastoma. Lancet 369, 2106–2120, 10.1016/S0140-6736(07)60983-0 (2007).
Sidell, N., Sarafian, T., Kelly, M., Tsuchida, T. & Haussler, M. Retinoic Acid-Induced Differentiation of Human Neuroblastoma - a Cell Variant System Showing 2 Distinct Responses. Exp Cell Biol 54, 287–300 (1986).
Zhao, F. et al. Nrf2 promotes neuronal cell differentiation. Free Radic Biol Med 47, 867–879 (2009).
Kullenberg, J. et al. Optimization of PAM scaffolds for neural tissue engineering: preliminary study on an SH-SY5Y cell line. Tissue Eng Part A 14, 1017–1023, 10.1089/ten.tea.2007.0163 (2008).
Das, E. & Bhattacharyya, N. P. MicroRNA-432 contributes to dopamine cocktail and retinoic acid induced differentiation of human neuroblastoma cells by targeting NESTIN and RCOR1 genes. FEBS Lett 588, 1706–1714, 10.1016/j.febslet.2014.03.015 (2014).
Schneider, L. et al. Differentiation of SH-SY5Y cells to a neuronal phenotype changes cellular bioenergetics and the response to oxidative stress. Free Radic Biol Med 51, 2007–2017, 10.1016/j.freeradbiomed.2011.08.030 (2011).
Xie, H. R., Hu, L. S. & Li, G. Y. SH-SY5Y human neuroblastoma cell line: in vitro cell model of dopaminergic neurons in Parkinson's disease. Chin Med J 123, 1086–1092 (2010).
Sun, J., Jamilpour, N., Wang, F. Y. & Wong, P. K. Geometric control of capillary architecture via cell-matrix mechanical interactions. Biomaterials 35, 3273–3280, 10.1016/j.biomaterials.2013.12.101 (2014).
Riahi, R. et al. Single cell gene expression analysis in injury-induced collective cell migration. Integrative biology: quantitative biosciences from nano to macro 6, 192–202, 10.1039/c3ib40095f (2014).
Sun, Y. et al. Hippo/YAP-mediated rigidity-dependent motor neuron differentiation of human pluripotent stem cells. Nature materials 13, 599–604, 10.1038/nmat3945nmat3945 (2014).
Lam, W. A. et al. Extracellular matrix rigidity modulates neuroblastoma cell differentiation and N-myc expression. Molecular cancer 9, 35, 10.1186/1476-4598-9-35 (2010).
Leipzig, N. D. & Shoichet, M. S. The effect of substrate stiffness on adult neural stem cell behavior. Biomaterials 30, 6867–6878, 10.1016/j.biomaterials.2009.09.002 (2009).
Schmidt, C. E. & Leach, J. B. Neural tissue engineering: Strategies for repair and regeneration. Annu Rev Biomed Eng 5, 293–347, 10.1146/annurev.bioeng.5.011303.120731 (2003).
Song, M. & Uhrich, K. E. Optimal Micropattern Dimensions Enhance Neurite Outgrowth Rates, Lengths and Orientations. Ann Biomed Eng 35, 1812–1820 (2007).
Von Philipsborn, A. C. et al. Microcontact printing of axon guidance molecules for generation of graded patterns. Nat Protoc 1, 1322–1328, 10.1038/nprot.2006.251 (2006).
Tee, S. Y., Fu, J. P., Chen, C. S. & Janmey, P. A. Cell Shape and Substrate Rigidity Both Regulate Cell Stiffness. Biophys J 100, 303–303 (2011).
Fu, J. et al. Mechanical regulation of cell function with geometrically modulated elastomeric substrates. Nat Methods 7, 733–736, 10.1038/nmeth.1487 (2010).
Kim, D.-H., Wong, P. K., Park, J., Levchenko, A. & Sun, Y. Microengineered platforms for cell mechanobiology. Annu Rev Biomed Eng 11, 203–233 (2009).
Nelson, C. M., Raghavan, S., Tan, J. L. & Chen, C. S. Degradation of Micropatterned Surfaces by Cell-Dependent and -Independent Processes. Langmuir 19, 1493–1499 (2002).
Yang, Y. L., Volmering, J., Junkin, M. & Wong, P. K. Comparative assembly of colloidal quantum dots on surface templates patterned by plasma lithography. Soft Matter 7, 10085–10090, 10.1039/C1sm06142a (2011).
Junkin, M., Watson, J., Geest, J. P. V. & Wong, P. K. Template-guided self-assembly of colloidal quantum dots using plasma lithography. Adv Mater 21, 1247–1251 (2009).
Keyes, J., Junkin, M., Cappello, J., Wu, X. & Wong, P. K. Evaporation-induced assembly of biomimetic polypeptides. Appl Phys Lett 93, 023120 (2008).
Junkin, M. et al. Mechanically induced intercellular calcium communication in confined endothelial structures. Biomaterials 34, 2049–2056, 10.1016/j.biomaterials.2012.11.060 (2013).
Long, J., Junkin, M., Wong, P. K., Hoying, J. & Deymier, P. Calcium Wave Propagation in Networks of Endothelial Cells: Model-based Theoretical and Experimental Study. PLoS Comput Biol 8, e1002847, 10.1371/journal.pcbi.1002847 (2012).
Junkin, M. & Wong, P. K. Probing cell migration in confined enivironments by plasma lithography. Biomaterials 32, 1848–1855 (2011).
Junkin, M. et al. Plasma lithography surface patterning for creation of cell networks. J Vis Exp 52 (2011).
Junkin, M., Leung, S. L., Whitman, S., Gregorio, C. C. & Wong, P. K. Cellular self-organization by autocatalytic alignment feedback. J Cell Sci 124, 4213–4220, 10.1242/Jcs.088898 (2011).
Goffin, J. M. et al. Focal adhesion size controls tension-dependent recruitment of alpha-smooth muscle actin to stress fibers. J Cell Biol 172, 259–268, 10.1083/jcb.200506179 (2006).
Wong, P. K. et al. Closed-loop control of cellular functions using combinatory drugs guided by a stochastic search algorithm. Proc Natl Acad Sci USA 105, 5105–5110 (2008).
Meyvantsson, I. & Beebe, D. J. Cell Culture Models in Microfluidic Systems. Annu Rev Anal Chem 1, 423-449, 10.1146/annurev.anchem.1.031207.113042 (2008).
Brown, X. Q., Ookawa, K. & Wong, J. Y. Evaluation of polydimethylsiloxane scaffolds with physiologically-relevant elastic moduli: interplay of substrate mechanics and surface chemistry effects on vascular smooth muscle cell response. Biomaterials 26, 3123–3129, 10.1016/j.biomaterilas.2004.08.009 (2005).
Evans, N. D. et al. Substrate Stiffness Affects Early Differentiation Events in Embryonic Stem Cells. Eur Cells Mater 18, 1–14 (2009).
Paszek, M. J. et al. Tensional homeostasis and the malignant phenotype. Cancer Cell 8, 241–254, S1535-6108(05)00268-0 (2005).
Yip, A. K. et al. Cellular Response to Substrate Rigidity Is Governed by Either Stress or Strain. Biophys J 104, 19–29, 10.1016/j.bpj.2012.11.3805 (2013).
Schoen, I., Pruitt, B. L. & Vogel, V. The Yin-Yang of Rigidity Sensing: How Forces and Mechanical Properties Regulate the Cellular Response to Materials. Ann Rev Mater Res, Vol 43 43, 589–618, 10.1146/annurev-matsci-062910-100407 (2013).
Gutierrez, E. et al. High refractive index silicone gels for simultaneous total internal reflection fluorescence and traction force microscopy of adherent cells. PLoS One 6, e23807, 10.1371/journal.pone.0023807 (2011).
Ross, R. A. et al. Human neuroblastoma I-type cells are malignant neural crest stem cells. Cell Growth Differ 6, 449–456 (1995).
Dean, Z. S., Riahi, R. & Wong, P. K. Spatiotemporal dynamics of microRNA during epithelial collective. Biomaterials (accepted) (2014).
Riahi, R. et al. Mapping photothermally induced gene expression in living cells and tissues by nanorod-locked nucleic Acid complexes. ACS Nano 8, 3597–3605, 10.1021/nn500107g (2014).
Sun, J., Xiao, Y., Wang, S., Slepian, M. J. & Wong, P. K. Advances in techniques for probing mechanoregulation of tissue morphogenesis. J Lab Autom (accepted) (2014).
Reffay, M. et al. Interplay of RhoA and mechanical forces in collective cell migration driven by leader cells. Nat Cell Biol 16, 217–223, 10.1038/ncb2917 (2014).
Mills, K. L., Zhu, X., Takayama, S. & Thouless, M. D. The mechanical properties of a surface-modified layer on poly(dimethylsiloxane). J Mater Res 23, 37–48, 10.1557/JMR.2008.0029 (2008).
Nelson, C. M. et al. Emergent patterns of growth controlled by multicellular form and mechanics. Proc Natl Acad Sci USA 102, 11594–11599, 10.1073/pnas.0502575102 (2005).
Tracqui, P., Ohayon, J. & Boudou, T. Theoretical analysis of the adaptive contractile behaviour of a single cardiomyocyte cultured on elastic substrates with varying stiffness. J Theor Biol 255, 92–105, 10.1016/j.jtbi.2008.07.036 (2008).
Acknowledgements
The authors thank Z. Dean for critical review of the manuscript. This work was supported by National Institutes of Health Director's New Innovator Award (DP2OD007161). N. J. is partially supported by the University of Arizona TRIF Imaging Fellowship and the Brown Distinguished Scholarship.
Author information
Authors and Affiliations
Contributions
K.H.N. and E.M. performed the experiments. N.J. implemented the finite element analysis. K.H.N., F.W., D.Z. and P.K.W. contributed to data analysis. K.H.N. and P.K.W. wrote the manuscript with comments and inputs from all authors.
Ethics declarations
Competing interests
The authors declare no competing financial interests.
Electronic supplementary material
Supplementary Information
Supplmentary Information
Rights and permissions
This work is licensed under a Creative Commons Attribution 4.0 International License. The images or other third party material in this article are included in the article's Creative Commons license, unless indicated otherwise in the credit line; if the material is not included under the Creative Commons license, users will need to obtain permission from the license holder in order to reproduce the material. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/
About this article
Cite this article
Nam, KH., Jamilpour, N., Mfoumou, E. et al. Probing Mechanoregulation of Neuronal Differentiation by Plasma Lithography Patterned Elastomeric Substrates. Sci Rep 4, 6965 (2014). https://doi.org/10.1038/srep06965
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/srep06965
- Springer Nature Limited