Abstract
To obtain the seepage evolution rule and water inrush mechanism of the collapse column, a multi-field coupled mechanical model for water inrush disasters caused by the collapse column is established in this paper, on the basis of the specific engineering conditions of the 1908 working face in the Qianjin coal mine. The mechanical model is composed of internal column elements within the collapse column and surrounding rock masses. The research focuses on the seepage evolution rule in the roof collapse column under different mining conditions and investigates the permeation instability mechanism of collapse column based on the transition of flow state. The research results indicate that the seepage pathway evolves continuously, ultimately forming a channel for water inrush, as the working face advances towards the collapse column. Besides, the water inflow increases rapidly when the working face advances 100 m, then gradually stabilizes, indicating that the seepage channel entry of the collapse column is in a stable stage. Meanwhile, mass loss in the collapse column gradually moves upward. the collapse column remains stable as a whole in the initial stage of water flow, with a small permeability, exhibiting linear flow. As time steps increases, particle loss in collapse column gradually extends to the upper part, forming a stable seepage channel. The flow velocity shows fluctuations with a slow declining trend over time.
Similar content being viewed by others
Introduction
In the karst mining areas of Southwest China, extensive exposure of bedrock is prevalent, driven by the extraction of coal resources. The resultant decline in ecological water levels has triggered the development of rocky desertification in the region. Southern coalfields in China, characterized by the abundant presence of roof collapse column due to geological strata conditions, exhibit dynamic water conduction within these columns during coal mining operations. The interaction between working face excavation and overlying aquifers activates water conduits in the roof collapse column. Particulate matter within the collapse column migrates and is lost with the flowing water, leading to permeation instability and the initiation of water inrush disasters. These phenomena significantly influence the safety and efficiency of mine operations, and lead to major safety incidents such as flooding due to water inrush.
Scholars both domestically and internationally have conducted a series of theoretical studies on water inrush from roof collapse column, achieving a significant progress. Regarding structural failure, based on Griffith's theory, Coulomb's criterion, and the limit equilibrium theory, Xu et al.1 derived the mechanism and criteria for the activation of water conduits in collapse column. By employing damage mechanics and fluid mechanics theories, Wang et al.2 investigated the coupled mechanisms of seepage-fracture-damage in mine water inrush, revealing the evolving patterns of surrounding rock seepage fields and column fracture damage during excavation. Wei et al.3 proposed a mechanical model for collapse column under negative and positive pressures, and established a predictive system for collapse column instability to guide on-site practices. Song et al.4 found that the stress in a thick-walled elliptical cylinder reaches its maximum value at the endpoint of the inner wall's major axis and its minimum value at the minor axis. In the field of fluid–solid coupling research, Terzaghi5 was among the first scholars to investigate fluid–solid coupling, introducing the concept of effective stress and establishing a one-dimensional consolidation model. By building upon Terzaghi's work, Biot6,7 further explored the relationship between pore pressure and porous media. Based on the principle of effective stress in porous media, Li et al.8 conducted a detailed analysis of the physical properties of fluid–solid coupling seepage, and established a comprehensive saturated porous media fluid–solid coupling model. By considering the heterogeneity of fractured rock in collapse column, Yao et al.9 studied the water inrush process of collapse column under the loss of fill particles, revealing the mechanism of water inrush from collapse column under stress-seepage coupling. Wang et al.10 established a physical model of upper and lower mining in a test mine, and analyzed the dynamic evolution and mechanism of karst roof water inrush under different mining sequences. By studying the influence of liquid nitrogen fracturing on granite, Wang et al.11,12 showed that the cyclic application of liquid nitrogen cooling promoted the formation of internal fractures in granite and its impact on the weakening characteristics of the mechanical properties of granite. Weile et al.13 studied the micropore characteristics of remolded loess and undisturbed loess at different resting periods, indicating that the prepared loess samples have obvious thixotropy, which has certain guiding significance for improving the geotechnical properties. Xue et al.14 studied the fracturing effect of water-cooled impact on high-temperature rocks, indicating that water-cooled impact can significantly reduce fracture initiation pressure and induce more secondary fractures.
In the realm of numerical simulations for water inrush from roof collapse column, previous researchers have employed various numerical computation software to conduct simulations and simulations under different mining conditions. This has resulted in numerous research achievements regarding the evolution characteristics of seepage fields in collapse column and the entire process of water inrush. Liu et al.15 utilized the finite element analysis software ANSYS, and investigated the distribution patterns of coal seam floor deformation, water pressure, and stress when the working face approached or moved away from the collapse column. Subsequently, they delved into the water inrush mechanism of collapse column. By employing FLAC3D software, Yin et al.16,17 simulated and analyzed the water inrush mechanism of the coal seam floor collapse column as the mining face advanced. Li et al.18 used the RFPA2D numerical simulation software, and obtained the influence of confined water pressure and the development height of collapse column on the delay time of water inrush. By employed FLAC3D numerical software, Li et al.19 studied the risk of water inrush from collapse column under mining influence, indicating a significant water inrush risk when the working face advanced to a distance of 10 m from the collapse column. Yao et al.20 utilized COMSOL Multiphysics software to solve a coupled model for deformation, seepage, and erosion in the water inrush process from collapse column on the coal seam floor. Zhengzheng et al.21,22 established a numerical model of slurry diffusion in veneer cracks, and further studied the diffusion law of grouting slurry in cracks under different rheological indexes and different consistency indexes. Liu et al.23 conducted a numerical study on the multi-physical field coupling mechanism in the process of microwave thermal recovery of shale gas, which provided a necessary theoretical guidance for the field application of microwave thermal recovery of shale gas.
Presently, research work on the water inrush disaster mechanisms of collapse column predominantly focuses on the internal column seepage evolution within the fractured rock mass24. However, a more in-depth exploration of the research on collapse column bodies considering the influence of external surrounding rock has not been carried out. Taking the 1908 working face in the Qianjin coal mine as a case study, this paper establishes a multi-field coupled mechanical model for water inrush from collapse column, consisting of both the internal column elements and external surrounding rock. By investigating the evolution patterns of seepage in the roof collapse column under different mining conditions and the mechanism of permeation instability leading to disasters based on flow state transition, the mechanisms behind water inrush from collapse column in the southwestern mining regions is revealed.
Stress-damage-seepage coupled model of water inrush in collapse column
Mechanical model of variable-mass seepage inside collapse column
(1) Basic assumptions
In order to establish a mathematical model for water inrush from collapse column considering fluid seepage, particle migration, and pore evolution, the following assumptions are made: (1) The solid skeleton of the collapse column can be approximated as a dual medium consisting of pores and fractures; (2) Fluid movement within the collapse column adheres to Darcy's law of permeability; (3) The velocity of suspended particles is approximately equal to the fluid velocity; (4) The rock mass within the collapse column is loosely fragmented, and the influence of stress on the permeability of the collapse column is neglected; (5) The volume concentration of particles in matrix pores and fractures is approximately equal; (6) The impact of particles in the fluid on the permeability characteristics of the fluid is neglected.
(2) Basic definition
The collapse column characteristic unit is composed of three parts, containing the solid skeleton, fluid, and suspended particles in the fluid. Among these, the volume concentration of suspended particles is denoted as C, and the density of particles is represented by \(\rho_{s}\). Assuming the side length of the matrix block is a, the fracture width is b, and \(b \ll a\), the volume of the unit element is given by
Assuming the porosity of the matrix block is denoted as \(\phi\), the void ratio of the unit element is given by
Assuming the Darcy seepage velocity is represented by \({q}_{i}\), the true velocity of the fluid is given by
(3) Particle mass conservation equation
The migration of particles within the fill material of collapse column under erosion can be considered as the combined effect of convection and diffusion, with a specific focus on convection. As illustrated in Fig. 1, representing a characteristic micro-element of the collapse column, the mass of particles entering the unit element per unit time due to the effects of convection and diffusion in the \(x_{i}\) \((i = 1,2,3)\) direction can be expressed as follows
In the x-direction, the mass of particles entering the unit element per unit time under the combined influence of convection and diffusion is given by
According to the principle of mass conservation, the inflow mass accounts for the increase in mass within the unit element volume per unit time.
where \(\dot{m}\) represents the mass of particles eroded from the unit element into the fluid per unit time and unit volume. The relationship between \(\dot{m}\), a and b satisfy the following equation
If the diffusion effect of particles is neglected, the governing equation for particle motion is
(4) Conservation equation of fluid mass
(5) Pore evolution governing equation
Sakthivadivel and Irmay, as well as Sakthivadivel, conducted research on the erosion of porous media by using theoretical analysis and experimental methods. I. Vardoulakis et al. summarized previous research findings on the erosion of porous media, providing the governing equation for pore evolution under particle migration in the context of porous media erosion.
Similarly, the evolution equation for fractures in dual-porosity media under erosion can be expressed as
The above equation indicates that the change in porosity caused by erosion is directly proportional to the particle concentration and the seepage velocity, where \(\lambda_{1}\) and \(\lambda_{2}\) are constants, and \(\parallel q\parallel { = }\sqrt {q_{1}^{2} + q_{2}^{2} + q_{3}^{2} }\) is the absolute value of the fluid seepage velocity.
(6) Conservation equation of fluid mass
The motion equation of the fluid can be expressed by Darcy's law as follows
where \(\vec{q}\) represents the Darcy velocity of the fluid (m/s); \(k\) is the permeability of the unit element (m2); \(\mu\) is the dynamic viscosity of the fluid (\({\text{Pa}} \cdot {\text{s}}\)); \(p\) is the pore pressure (Pa); \(\rho\) is the density of the fluid (\({\text{kg/m}}^{{3}}\)); and \(\nabla z\) is the unit vector in the direction of gravitational force.
(7) Porosity–permeability relationship equation
Taking into account the six Eqs. (9) to (14) and the six unknowns \(\phi\), \(b\), \(k_{e}\), \(C\), \(p\), and \(\vec{q}\), the system of equations are in closed state, forming a comprehensive mechanical model for water inrush from collapse column under erosion. The coupling relationships among the model equations are illustrated in Fig. 2.
Damage constitutive mechanical model of external rock mass in collapse column
Rock mechanical model based on micro-unit damage evolution
(1) Ontological model
Rock is a complex material containing joint fissures, and under external forces, the stress–strain relationship exhibits non-linearity. Therefore, it is necessary to establish a rock damage constitutive model to analyze the mechanical properties of rock during the damage process. According to the Lemaitre equivalent strain hypothesis, the fundamental relationship of the rock damage constitutive model is given by
In the equation, \(\sigma^{*}\) represents the effective stress of the undamaged part of the rock, \(\sigma\) is the nominal stress, and D is the damage variable.
To describe the heterogeneity of rock material parameters such as elastic modulus, strength, permeability, etc., it is necessary to assign corresponding mechanical parameters to micro-elements. Assuming that they follow a Weibull distribution, the probability density function is given by
where m represents the degree of rock in-homogeneity, x is the random distribution variable of rock micro-mechanical parameters, n is the average value of rock micro-mechanical parameters.
Assuming that the rock micro-element damage probability obeys the probability density function f(x), the damage variable is
The stress–strain relationship of the undamaged micro-elements of the rock satisfies Hooke's law in the principal stress state.
where \(v\) is Poisson's ratio, \(\varepsilon\) is strain, E is elastic modulus, and i, j, k is 1, 2, 3 and unequal.
According to Eqs. (14) and (15), the micro-elementary damage ontological model of rock based on Weibull distribution is obtained, and the second principal stress is equal to the third principal stress in conventional triaxial compression test of rock, i.e., the final equation is transformed into
According to the effective stress principle
The intrinsic model of rock seepage damage based on Weibull distribution is obtained,
Multi-coupled control equations
(1) Deformation equation
Assuming that each stress component on the rock micro-element satisfies the hydro-static equilibrium condition
where \(\sigma_{ij.j}\) is the component of the unit stress tensor and fi is the component of the body force.
Rock micro-elements are elastically deformed by external forces, and the strains and displacements satisfy the geometric equations
where \(\varepsilon_{ij}\) is the strain tensor ui and uj are the components of the displacement in the i and j directions, respectively.
(2) Flow equation
Seepage field control equation is
Assuming that the rock skeleton produces elastic deformation, and considering the effect of pore water pressure on the volumetric deformation of the skeleton, a porosity evolution equation is established to describe the change of the porosity of the rock under constant temperature conditions.
where \(\alpha\) is the Biot coefficient, \(\phi_{s0}\) is the initial porosity of the rock, and Ks is the bulk modulus of the rock particles.
When considering the effect of damage on rock permeability, the following relationship is satisfied
where \(\alpha_{k}\) is the coefficient of influence of damage on permeability, taken as 5.0.
Bringing Eq. (25) into the cubic law (26) leads to a model for the evolution of the permeability coefficient.
The rock damage evolution ontological model of stress-seepage coupling can be constructed by the above theoretical formulation, and the relationship between the stress field, seepage field, and damage is shown in Fig. 3.
Multi-field coupled numerical model of water inrush disaster in collapse column
The collapse column is situated beneath the aquifer, typically residing in deeper geological strata. The aquifer, serving as the overlying layer, provides moisture that contributes to the formation of the collapse column through dissolution processes. The development of the collapse column influence the structure and functionality of the overlying aquifer. The cause of water inrush in collapse column is attributed to the disturbance of the equilibrium between surrounding rock and water during coal mining. Under the influence of disturbances caused by mining, numerous random fractures gradually develop within the collapse column. As a result of water seepage, the fill particles within these fractures are continuously transported, leading to the further expansion of the fractures. The liquid carrying fine particles exerts erosive and abrasive effects on the rock mass, triggering the continued expansion and connection of fractures. Ultimately, a stable water passage is formed.
Numerical simulation model
Based on the geological conditions detected in the 1908 working face of the Qianjin coal mine, the geometric dimensions of the calculation model for the coal seam working face containing a collapse column are set at 400 × 200 × 265 m. The cross-sectional view of the model is shown in the Fig. 4, with the 2 m coal seam thickness.
The working face advances from the left side of the model to the right in a one-cut full height manner. The collapse column is located in the middle of the model, with a height of 185 m, a bottom diameter of 30 m, and a top diameter of 10 m. The model bottom is constrained in the vertical direction, and the left and right sides are constrained in the horizontal direction, while the upper part of the model is an open boundary. For the permeability of the mining area, the concave depression in the upper left part of the model serves as a water pressure source. After the advancement of the working face, the water pressure in the goaf becomes 0, and the remaining boundaries are impermeable. The initial moment is set at the time of coal excavation, and the Mohr–Coulomb failure criterion is employed.
Numerical simulation results
(1) Evolutionary cloud maps and seepage vectors of the water inrush channel
From Fig. 5, it can be observed that as the working face continuously advances toward the collapse column, the seepage channels evolve continuously, ultimately forming a water inrush channel. Before the working face is 25 m away from the collapse column, there is no significant change in the fractures inside the collapse column. When the working face advances to within 5 m of the collapse column, the seepage channel inside the collapse column begins to form. By the time the working face advances to 15 m inside the collapse column, the seepage channel inside the collapse column has fully formed. Through the analysis of seepage vectors, the formation path of the water inrush channel can be observed. It initiates from the concave depression in the upper left part of the model, diagonally moves to the lower right part, enters through the top of the collapse column, undergoes some curvature within the collapse column, and finally enters the working face from the left side at the bottom of the collapse column.
From Fig. 6, it can be observed that with the increase in the advancement distance of the working face, before reaching 100 m, the water inflow from the collapse column is relatively small, approximately 0 to 1 m3/h. However, after advancing to 100 m, due to the influence of mining activities, the internal fractured rock mass within the collapse column experiences a seepage-erosion gushing water effect, leading to a rapid increase in the water inflow to 9.8 m3/h. As the working face continues to advance, the water inflow gradually stabilizes, indicating that the seepage channels within the collapse column enter a stable stage. This process of water inflow variation is consistent with on-site monitoring, further confirming the rationality and scientific validity of the collapse column mass change gushing water model.
Water inrush mechanism induced by permeability destabilization of collapse column based on the flow state transition
From the microscopic point of view, the variable mass seepage process in collapse column is the erosion, dissolution, abrasion and other interactions among broken rock, fluid medium, fine particles, leading to the change in porosity and permeability, and this process is inextricably linked with the time. When the pressure gradient is larger, the completion of the flow transition time is shorter. When the pressure gradient is smaller, the process appears slow, but ultimately still shows the change in the flow transition.
In order to analyze the flow state of the collapse column with time from non-Darcy high-velocity flow into Navier–Stokes turbulent flow during the mass change process in detail, the collapse column is divided into six steps from the bottom to the top, namely, 30 m, 60 m, 90 m, 120 m, 150 m, and 180 m, which corresponds to the state of the collapse column at six consecutive time intervals, and the collapse column region in the upper part of the interface of each step satisfies the porous in each step, the upper collapse column region of the interface satisfies the porous Brinkman equation with Forchheimer's modification, and the lower collapse column region of the interface satisfies the Navier–Stokes turbulence equation.
The numerical calculation model is shown in Fig. 7. The aquifer permeability is 2.1 × 10−12, the porosity is 0.14, the permeability of collapse column is 2.1 × 10−10, the porosity is 0.348. The model aquifer boundary is a fixed pressure boundary, the boundary pressure is 4.1 MPa, and the outlet is one atmosphere, and the free triangle mesh is used to divide into 3098 cells.
By observing the velocity distributions corresponding to the six time steps, shown in Fig. 8, it is evident that the velocity of the collapse column can be divided into two parts. Through analysis of the equations corresponding to each time step and the velocity distributions, the region satisfying the Brinkman equation corrected by Forchheimer for porous areas exhibits significantly faster velocities than the region satisfying the Navier–Stokes turbulent flow equation. With the progression of time steps, the process of mass transition intensifies, and the interface gradually moves upward. In this process, as the mass transition proceeds gradually, the region satisfying the N-S turbulent flow equation gradually increases, while the porous medium region gradually decreases. The velocities increase steadily. When a sufficient amount of time has elapsed, the entire collapse column region satisfies the Navier–Stokes turbulent flow equation, leading to a pronounced transition in flow state, and the velocity and risk of water influx further escalate.
By observing the velocity curve in Fig. 9, it is obvious that the velocity remains constant in the first five steps until it reaches the interface between the two equations along monitoring line C-D, where the velocity undergoes a sudden change. It rapidly increases, gradually declines to a constant value, and in the sixth step, it rises from 0.0575 m/s to 0.08607 m/s. Subsequently, it exhibits fluctuations and an overall decreasing trend, indicating continuous mass loss in the collapse column, destabilizing progressively from the bottom to the top. The water influx velocity in the first step is significantly higher than in steps 2, 3, 4, and 5, indicating that the initial water influx velocity is notably larger, and the initial phase is relatively vulnerable. Therefore, the key to preventing disasters such as water influx in the collapse column lies in sharp early monitoring and timely management. When the collapse column approaches complete penetration, the water influx speed is generally fast, far exceeding the first five steps. Therefore, immediate measures should be taken once water influx occurs to prevent excessive mass loss in the collapse column, avoiding complete penetration with the aquifer, which can lead to rapid water influx.
Through the observation of Figs. 10 and 11, when the collapse column has not reached the instability interface, the Forchheimer number (F0) and the non-Darcy effect (E) are minimal, approaching zero. This indicates that the fluid flow inside the collapse column exhibits relatively weak nonlinear characteristics at this stage, leaning towards linear flow. However, once the collapse column reaches the instability interface, F0 and non-Darcy effect E rapidly increase. This suggests that in the event of water influx, the velocity is many times that of the flow velocity within the collapse column. At the interface and its vicinity, F0 significantly increases but remains below 1 in the first five steps, indicating that under local mass loss conditions, the fluid entering the collapse column transitions gradually from linear flow to nonlinear flow. However, the degree of non-linearity is low and does not reach the level of turbulence. This implies that mass loss creates local seepage channels, and the velocity is not a constant but fluctuates, encountering hindrance during flow and exhibiting a slow declining trend. When the collapse column almost entirely satisfies the Navier–Stokes equations over time, both the Forchheimer number and the non-Darcy effect significantly increase. This signifies a sharp rise in seepage velocity, substantial nonlinear flow, and a high likelihood of severe water influx.
Conclusions
In response to water inrush disaster in the collapse column induced by mining activities, this paper proposes a multi-field coupled mechanical model for water inrush disaster in the collapse column, consisting of the internal columnar structure of the collapse column and the surrounding rock. Numerical simulations are conducted to investigate the evolution of seepage in the roof collapse column under different mining conditions, and the water inrush mechanism induced by the permeability instability of the collapse column based on flow transition. The study systematically elucidates the evolution of seepage in the collapse column and the mechanism of water inrush disaster under mining influence. The following conclusions are obtained.
-
1.
Continuous medium mechanical methods are employed to investigate the loss of fillings and the evolution of permeability in the process of fractured rock mass seepage. A dynamic model for the coupled flow and mass transfer in fractured rock mass seepage is established. Based on the principles of elasticity, damage theory, and seepage theory, a damage constitutive model for rock micro-element is constructed. By linking the stress field, seepage field, and damage field, the dynamic model reveals the seepage mutation mechanism in fractured rock mass from the perspectives of mass transfer and fluid–solid coupling.
-
2.
Through numerical simulation, the evolution process of the seepage channel in the collapse column under mining-induced stress and the variation in water inflow are reproduced. As the advancing distance of the working face increases, the internal fractures of the collapse column gradually enlarges, forming a seepage channel. At the same time, the water inflow exhibits a slow-rapid-stable three-stage pattern. This variation process closely aligns with on-site monitoring, further confirming the rationality and scientific validity of the model for mass transfer water inrush in fractured rock masses within collapse column.
-
3.
Through the observation of velocity cloud maps, the mass loss in the roof collapse column gradually moves upward. In the initial stage of water flow, the collapse column remains stable as a whole, with a small permeability and linear flow. As the time steps increases, the particle loss gradually expands to the upper part, forming a stable seepage channel, and the flow velocity exhibits fluctuations with a slow decline. In the initial stage, the mass transfer flow rate is faster than in the middle time steps, and strong non-linear flow does not occur, indicating that prevention is crucial in the early stages. After the formation of the water influx channel, the velocity shows the strong non-linear characteristics, making the prevention more challenging. Therefore, in dealing with water influx disasters in the roof collapse column, it is essential to adhere to the principle of early detection and early intervention to prevent the evolution into more significant water inrush disaster.
Data availability
Some or all data, models, or codes generated or used during the study are available from the corresponding author by request.
References
Xu, J. P., Kong, Y. F. & Tong, H. S. The mechanism and criterion of karst collapse column activating to conduct water under weak runoff state. Carsol. Sin. 2006(1), 35–39 (2006).
Wang, W. J., Zhao, Y. L., Li, Q. F. & Peng, W. Q. Disaster mechanism of karst water bursting in mine. J. China Coal Soc. 35(03), 443–448 (2010).
Wei, Y. Y. & Sun, S. I. Comprehensive critical mechanical model of covered karst collapse under the effects of positive and negative pressureJ7. Bull. Eng. Geol. Env. 77, 177–190 (2018).
Song, Y. Q., Wang, X. Y., Cheng, P., Peng, C. J. & Xu, S. The mechanical criterion and numerical simulation of thick-walled elliptical cylinder collapse column model under water inrush. J. China Coal Soc. 36(3), 452–455 (2011).
Terzaghi, K. Theoretical Soil Mechanics (Wiley, 1943).
Biot, M. A. General theory of three dimensional consolidation. J. Appl. Phys. 12, 155–164 (1941).
Biot, M. A. General solution of the equation of elasticity and consolidation for a porous material. J. Appl. Mech. 78, 91–96 (1956).
Li, P. C., Kong, X. Y. & Lu, D. T. Mathematical modeling of flow in saturated porous media on account of fluid-structure coupling effect. Chin. J. Hydrodyn. 18(4), 419–426 (2003).
Yao, B. H., Mao, X. B. & Zhang, K. A non-linear fluid-solid coupling mechanical model study for paleokarst collapse breccia pipes under erosion effect. Electron. J. Geotech. Eng. 17, 277–290 (2012).
Wang, W. et al. Study of roof water inrush control technology and water resources utilization during coal mining in a Karst area. J. Mine Water Environ. https://doi.org/10.1007/s10230-023-00953-3 (2023).
Wang, L. C. et al. Experimental study on mode I fracture characteristics of granite after low temperature cooling with liquid nitrogen. J. Water. https://doi.org/10.3390/w15193442 (2023).
Wang, L. C. et al. Effect of weakening characteristics of mechanical properties of granite under the action of liquid nitrogen. J. Front. Ecol. Evol. https://doi.org/10.3389/fevo.2023.1249617 (2023).
Wei, L. et al. An analysis of thixotropic micropore variation and its mechanism in loess. J. Front. Ecol. Evol. https://doi.org/10.3389/fevo.2023.1242462 (2023).
Xue, Y. et al. Effect of water-cooling shock on fracture initiation and morphology of high-temperature granite: Application of hydraulic fracturing to enhanced geothermal systems. J. Appl. Energy 337, 120858 (2023).
Liu, Z. J. & Xiong, C. S. Numerical simulation study on water inrush mechanism from collapse column. Chin. J. Rock Mech. Eng. 2007(S2), 4013–4018 (2007).
Yin, S. X. & Wang, S. X. A numerical simulation analysis of influence of Karstic collapse columns on rock mass yield and water inrush from coal floor. J. China Coal Soc. 28(3), 264–269 (2003).
Yin, S. X. & Wu, Q. Simulation and mechanism analysis of water inrush from Karstic collapse columns in coal floor. Chin. J. Rock Mech. Eng. 23(15), 2551–2556 (2004).
Li, L. C., Tang, C. A., Zuo, Y. J., Li, G. & Liu, C. Mechanism of hysteretic ground water inrush coal seam floor with Karstic collapse columns. J. China Coal Soc. 34(9), 1212–1216 (2009).
Li, Z. H., Xie, H., Li, J. B. & He, Z. H. Experimental study of mining effect on collapse column activated water conducting mechanism. J. Cent. South Univ. (Sci. Technol.) 45(12), 4377–4383 (2014).
Yao, B. H. et al. A deformation–seepage-erosion coupling model for water outburst of Karst collapse column and its application. J. China Coal Soc. 43(7), 2007–2013. https://doi.org/10.13225/j.cnki.jccs.2017.1276 (2018).
Zhengzheng, C. et al. Research on slurry diffusion and seepage law in mining overburden fractures based on CFD numerical method. J. Sci. Rep. 13, 21302. https://doi.org/10.1038/s41598-023-48828-5 (2023).
Zhengzheng, C. et al. Abnormal ore pressure mechanism of working face under the influence of overlying concentrated coal pillar. J. Sci Rep 14, 626. https://doi.org/10.1038/s41598-024-51148-x (2024).
Liu, J., Xue, Y., Fu, Y., Yao, K. & Liu, J. Numerical investigation on microwave-thermal recovery of shale gas based on a fully coupled electromagnetic, heat transfer, and multiphase flow model. J. Energy 263, 126090 (2023).
Cao, Z. et al. Migration mechanism of grouting slurry and permeability reduction in mining fractured rock mass. J. Sci. Rep. https://doi.org/10.1038/s41598-024-51557-y (2024).
Acknowledgements
This research is supported by the Natural Science Foundation of Henan Province (222300420007), the National Natural Science Foundation of China (52004082, 52174073, 52274079, 52304084), the Program for the Scientific and Technological Innovation Team in Universities of Henan Province (23IRTSTHN005), the Program for Science & Technology Innovation Talents in Universities of Henan Province (24HASTIT021), the Science and Technology Project of Henan Province (232102321098), the Young Teacher Foundation of Henan Polytechnic University (2023XQG-01, 2019XQG-08), the Graduate Education and Teaching Reformation Project of Henan Polytechnic University (2023YJ22), the Central Plains Talent Program-Central Plains Young Top Talent (Central Plains Young Postdoctoral Innovative talent), the 16th Batch of Special Grants from China Postdoctoral Science Foundation (Center) (2023T160194), the Henan Provincial Youth Talent Promotion Program (2023HYTP049). The research work in the article is carefully supervised by Suo Jie (Southwest Petroleum University).
Funding
This research is supported by the Natural Science Foundation of Henan Province (222300420007), the National Natural Science Foundation of China (52004082, 52174073, 52274079, 52304084), the Program for the Scientific and Technological Innovation Team in Universities of Henan Province (23IRTSTHN005), the Program for Science & Technology Innovation Talents in Universities of Henan Province (24HASTIT021), the Science and Technology Project of Henan Province (232102321098), the Young Teacher Foundation of Henan Polytechnic University (2023XQG-01, 2019XQG-08), the Graduate Education and Teaching Reformation Project of Henan Polytechnic University (2023YJ22), the Central Plains Talent Program-Central Plains Young Top Talent (Central Plains Young Postdoctoral Innovative talent), the 16th Batch of Special Grants from China Postdoctoral Science Foundation (Center) (2023T160194), the Henan Provincial Youth Talent Promotion Program (2023HYTP049). The research work in the article is carefully supervised by Suo Jie (Southwest Petroleum University).
Author information
Authors and Affiliations
Contributions
W.Y.: Supervision, Writing-review & editing. C.Z.: Data curation, Methodology, Writing-original draft. L.Z.: Conceptualization, Project administration, Supervision. D.F.: Project administration, Resources. W.W.: Conceptualization, Writing-original draft. Z.M.: Project administration, Resources. H.Z.: Writing-original draft. X.Y.: Conceptualization, Project administration. All authors reviewed the manuscript. All authors of this article consent to publish.
Corresponding author
Ethics declarations
Competing interests
The authors declare no competing interests.
Additional information
Publisher's note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Yongjiang, W., Zhengzheng, C., Zhenhua, L. et al. Seepage evolution characteristics and water inrush mechanism in collapse column under mining influence. Sci Rep 14, 5862 (2024). https://doi.org/10.1038/s41598-024-54180-z
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41598-024-54180-z
- Springer Nature Limited
Keywords
This article is cited by
-
Numerical research on disastrous mechanism of seepage instability of karst collapse column considering variable mass effect
Scientific Reports (2024)
-
Fracture propagation and pore pressure evolution characteristics induced by hydraulic and pneumatic fracturing of coal
Scientific Reports (2024)
-
Breaking law of overburden rock and key mining technology for narrow coal pillar working face in isolated island
Scientific Reports (2024)
-
Nonlinear evolution characteristics and seepage mechanical model of fluids in broken rock mass based on the bifurcation theory
Scientific Reports (2024)
-
Research on overburden structural characteristics and support adaptability in cooperative mining of sectional coal pillar and bottom coal seam
Scientific Reports (2024)