Abstract
Carbon nanocage structures such as fullerene, nanotubes, nanocapsules, nanopolyhedra, cones, cubes, and onions have been reported since the discovery of C60, and they offer tremendous promise for investigating materials of low dimensions in an isolated environment. Boron Nitride (BN) nanomaterials such a: nanotubes, nanocapsules, nanoparticles, and clusters have been described in several studies and are predicted to be useful as electronic devices, high heat-resistance semiconductors, nanocables, insulator lubricants, and gas storage materials. The interaction, and electronic of octahedral B12N12 nanocage cluster covalently modified from the attachment of alkyl and aryl radicals were analyzed using Density Functional Theory calculations. The work discusses for the first time to our knowledge the complete investigation of the impact of the grafted aryl and alkyl groups on the electronic, bang gap, and density of states on the B12N12. Furthermore, this is the first complete description of these radicals attaching to a surface of B12N12 nanocage cluster.
Similar content being viewed by others
Introduction
Because of its excellent properties such as: high mechanical hardness, thermochemical stability, and electric and thermal conductivity, the boron nitride (BN) has acquired immense scientific interest1,2,3. Recently, a number of BN nanostructures, such as nanoribbons, nanomeshes, fullerenes, and hybrids with graphene have also been synthetized and used in a number of different applications (catalysis, heat transport, drug delivery1,4,5,6. The B12N12 fullerene (a 0D nanomaterial) is one of the most stable small III–V fullerenes known, with a structure made up of squares and hexagons and a network of boron nitrogen bonds that is more energetically important than those made up of pentagons and hexagons1,7,8. Due to its unusual chemical, physical and surface characteristics, B12N12 fullerene has been explored in recent years for biomedical9, drug delivery10,11, detection12 and biosensor applications6,8,13,14,15. On all of these various applications, surface modification is a critical step determining the use of material. Nanomaterials' surface modifications opens new opportunities because it affects certain properties such as dispersibility, stability, electronic and optical characteristics16,17. Aryl diazonium salts are commonly accepted as a gold standard to effectively modify materials in their bulk or nanoscopic form. This technique is the only overall surface modification strategy that is applied for the surface modifications of: superconducting, semi-conducting, conducting or insulating materials18. Despite the lack of experimental data, alkyl and aryl groups grafted onto the B12N12 nanocage cluster are explored using Density Functional Theory (DFT). Recently, DFT methods have been used to obtain molecular insights into the interaction of aryl or alkyl radicals with a range of different nanomaterials, including graphene19,20, graphene oxide21, graphyne and graphdiyne22, borophene23, 2D black phosphorus24, gold cluster25,26, and so on. DFT simulations were used to explore the diazonium-modified graphene with different functional groups from a theoretical approach. The results show that diazotization, a chemical modification of graphene, has a major influence on its properties, opening up a wide variety of possibilities in microelectronics, energy storage and conversion devices, and electrocatalysis27,28. The surface modification of graphene was explored, and it was shown that their binding is covalent when the coupling is done via electron deficient nitroaryl radicals formed by diazonium intermediate breakdown29. Berisha investigated the grafting of aryl radicals onto graphyne and graphdiyne via DFT calculations and discovered preferential binding site22. In this case, the calculated the Bond Dissociation Energy (BDE), which reached a value of 66 kcal/mol for the scission of the phenyl group, supports the grafted layer's remarkable stability. Furthermore, Molecular Dynamics (MD) simulation revealed that the grafted substituted aryl groups formed from aryldiazonium salts had a significant impact on the solvation characteristics of this material. DFT calculations also allowed for the correlation of spectroscopic results [obtained by surface-enhanced Raman spectroscopy (SERS)] with experimental data, demonstrating the presence of the Au-C(aryl and alkyl) bonding25,26.
The grafting of materials improves their usefulness and creates new potential for a varied array of applications18,30. The utilization of radicals formed from diazonium salts has significant benefits in this context: the salts are easily synthesized (isolated or not) from aromatic amines, many of which are commercially available, and the reaction may modify any surface, whether conductive or not. The grafting reaction can occur spontaneously or be triggered by electrochemistry, photochemistry, or other approaches. In addition, this is among a select set of compounds that establish a robust covalent bond between the surface and the aryl group, and the resulting interface is extremely stable.
The stability of the attached organic layer is important in the application of materials in areas such as sensing, photovoltaics, and so on, so evaluating this parameter, among others, is crucial. This paper investigates the geometry, binding energy, transition state, electronic properties, frontier molecular orbital, molecular electrostatic potential, and Mulliken charges of the aryl and alkyl radicals attached to the surface of B12N12 fullerene.
Computational methods
DFT was done using the DMol3 software to speed up the computations (BIOVIA). Geometry optimization was performed inside the generalized gradient approximation (GGA-PBE)31 utilizing the double numerical plus polarization base set (DNP)32 and the Perdew-Burke-Ernzerhof functional. To account for van der Waals interactions, the Tkatchenko-Scheffler (TS)33 method was applied. Because there were no imaginary frequencies, the designed structures' energy minima were attained. The resultant geometry was then utilized in Gaussian. All computations in this study were done using Gaussian 16 at the B3LYP34/def2tzvp34 level of theory (with Grime's dispersion correction GD3)35. TDDFT, or Time-Dependent Density Functional Theory, was applied to the optimized structure in gas so that we could conduct an investigation of the UV spectra. To investigate the interaction mechanism, geometry optimization, adsorption energies, dipole moment, molecule electrostatic potential (MEP), frontier molecular orbitals (HOMO–LUMO distribution), and partial density of states (PDOS) were determined. AIMII software is used for the Quantum Theory of Atoms in Molecules (QTAIM) investigation. Other parameters such as: molecular electrostatic potential (MEP), frontier molecular orbital (FMO), partial density of states (PDOS), Electron Localization Function (ELF), Electron Density Differences Maps (EDDM) and Mulliken population analysis (MPA) as well have also been computed to gain structural details regarding the interaction of radicals with the B12N12 fullerene4,6,14,36.
The BDE was determined using the following formula22,23,25:
where EB12N12/aryl or alkyl radical stands for the energy of the grafted B12N12 structure. EB12N12 stands for the total energy of the pure B12N12 nanocage,
The wavefunction analysis and graphical representation of the derived results was performed using Multiwfn37,38 software and Visual Molecular Dynamics (VMD)39.
Results and discussion
Bond lengths and adsorption energies
Figure 1 depicts the B12N12 optimized structure at the B3LYP[/def2tzvp basis set. B12N12 structure has been optimized. In this cluster, the nitrogen and boron sites are equal. Six tetragonal (4-membered) and eight hexagonal (6-membered) rings make up the cluster. The length of the BN bond varies depending on whether the bond is between a tetragonal and a hexagonal ring (b64) or between two hexagonal rings or between two hexagonal rings (b66)6,40. The length of the BN bond shared by two hexagonal rings (b66) is 1.43783 Å, whereas the length of the BN bond shared by a tetragonal and a hexagonal ring (b64) is 1.48422 Å.
Grafting aryl and alkyl groups onto the BN cage, in general, induces alterations in the geometry of the BN cage. When these groups are present on the link between two hexagonal rings (atom N2-B24), the length of the BN bond increases in all cases of the grafted moieties as presents in Table 1. This is also seen to be the case for the BN bonding that exists between the tetragonal rings (atoms N4-B24). These induced structural alterations caused by radical grafting have previously been documented in gold clusters and other materials25,41. The bond between the grafted B24 atom of the B12N12 nanocage cluster and the C atoms of aryl or alkyl groups is close to the previously reported experimental value for B–C bond of d(B-C) = 1.534 ± 0.01 Å indicating that these moieties are strongly covalently bound to the clusters surface42.
We investigated the reactions that the aryl radicals (phenyl and nitrophenyl) and the alkyl radical (hexyl) had with the B12N12 nanocage cluster. It has been previously confirmed that the Bond Dissociation Energy (BDE) is a significant parameter that can be used to evaluate the strength of the interface while the grafting process is taking place25,26,41,43,44,45,46.
The calculated BDEs for the grafted groups as shown in Fig. 2 were more than 60 kcal/mol. These numbers are suggestive of the establishment of an interface that is stable43. The layers generated by grafting radicals are more stable than previously documented surface modification processes based on the formation of self-assembling monolayers (SAM) through thiol chemistry (BDE|Au-S-(CH2)5-COOH|= 31.59 kcal/mol).
Dipole moment
The dipole moments of pure B12N12 and grafted B12N12 were compared and are shown in Table 2. The pure B12N12 cage has no dipole moment since it is symmetrical40. Binding of a–Ph, –C6H12, or PhNO2 group raises the dipole moment in B12N12-Ph from zero to 2.237 D, accordingly to 6.666 for –PhNO2, but grafting of a -alkyl group (–C6H12) results in just a minor increase of the dipole moment up to 0.882.
This effect is important as not only alters the electronic properties as seen above but also it enables the dispersibility in different solvents22. These alterations are ascribed to aryl or alkyl group additions, which disrupt charge separation in the B12N12 nanocage. The dipole moment vectors (Fig. 2) in the grafted structures, as shown in Fig. 3, point from the grafted groups toward the B12N12 or vice versa, suggesting charge transfer from these groups to the nanocage or the inverse.
MEP analysis
To understand the interaction between the B12N12 and the grafted aryl or alkyl group, the molecular electrostatic potential (MEP) is performed. It represents the extent of charge dispersion in a molecule and relates molecular structure to physiochemical qualities such as chemical reactivity, dipole moment, and partial charges.
The electron-deficient blue area (in the online version) in Fig. 4 represents boron atoms, whereas the electron-rich yellow zone represents nitrogen atoms. Because the pure B12N12 nanocage is symmetrical, it exhibits both charges to an equal amount, which alter somewhat following the grafting of alkyl or aryl groups. These groups after their grafting reduce the intensity of the blue zone on the B12N12 nanocage (shifting toward the grafted moieties).
Electronic properties
The influence that the grafted groups have on the B12N12 nanocages can be seen rather well when looking at the densities as well as the electronic energy levels. Figure 5 provides details about a variety of orbital properties, including the energies of the HOMO and LUMO states as well as the HOMO–LUMO band gap (Eg). The B12N12 nanocage is a semiconductor with a HOMO LUMO gap (Eg) of 6.752 eV. The B12N12 nanocage has HOMO and LUMO values of − 7.92 and − 1.17 eV, respectively. The Fermi level, EFL, is equal to − 4.54 eV. The Fermi level denotes the center of the HOMO–LUMO energy gap (in a molecule when the temperature is 0 K). The grafting of carbon-centered radicals onto a nanocage alters the HOMO and LUMO energies and consequently the band gap of this entity. The band gap difference is reduced in all grafted instances. The HOMO–LUMO gap (Eg) is directly related to conductivity, resulting in a high energy level for the newly generated HOMO47. As a result of the narrowing of the energy gap between the HOMO and LUMO states, it is anticipated that there would be a significant increase in the material's electrical conductivity (Eg). This will make it possible for the resultant grafted clusters to be utilized in novel ways (electronics, photovoltaic applications, sensing, …).
The DFT results were used to calculate the band gap energy and the threshold wavelength48. The Tauc plot generated from DFT calculations in the gas phase and the corresponding optical band gap values can be found in the Supporting Information (Fig. S1 and Table S1)49. The optical bang gap as observed in many studies is often much lower than the fundamental HOMO–LUMO gap because, in the excited state (as opposed to the ionized state), the electron and hole remain electrostatically coupled to one another50.
Partial density of states (PDOS)
The structural alterations and electrical characteristics of bare B12N12 and B12N12 nanocages after grafting were investigated using partial density of states (PDOS). As shown in Fig. 6, the LUMO has density primarily localized grafted groups in the case of B12N12-PhNO2, on the entire structure for B12N12-Ph, and almost on the B12N12 nanocage for B12N12-C6H13; the HOMO is centered only on the grafted phenyl groups, whereas in the case of B12N12-C6H13 it is also in the vicinity of the grafted.
Quantum theory of atoms in molecules (QTAIM)
Electron density analysis was performed in the context of Bader's proposed quantum theory of atoms in molecules (QTAIM)51,52. In general, the electron density at the Bond Critical Points (BCP), ρ(b), is greater than 0.20 e− bohr−3 in shared-shell interactions, i.e., covalent bonds, and less than 0.10 e− bohr−3 in closed-shell interactions (e.g. ionic, van der Waals, hydrogen bonding)53,54.
The binding among the atoms on the grafted structures is visible in Fig. 7, by analyzing the presence of the Bond Critical Points (BCPs)—presented as green spheres. As seen in Table 3, ρ(b) is close to 0.2 e− bohr−3, indicating that the formed B-C bond has some polarization due to differences in electronegativity among the bonded atoms [χ(C) = 2.5 and χ(B) = 1.5].
Another energetic descriptor that is frequently used to distinguish two types of closed-shell bonding is the |Vb|/Gb ratio, which reflects the covalency magnitude of the interaction. If the latter ratio is less than one, the kinetic energy density is the leading term, and electrons are destabilized near the BCP, implying that no covalency is expected (for example pure ionic or van der Waals bonding). These interactions are referred to as pure closed-shell interactions (pure CS). The second type of closed-shell bonding involves some electron sharing (|Vb|/Gb > 1, indicating that the potential energy density is high and electrons are stabilized at the BCP)54,55. In the case of B12N12 grafted cluster the |Vb|/Gb is > 1 indicating that there is a close shell type of bonding with electron some sharing. The delocalization index, DI, or δ(Ω,Λ) is a quantitative tool used to assess the extent of electron sharing in the context of QTAIM. DI is close to zero for an ideal ionic system, but close to unity for homo-nuclear covalently bonded systems, two for double bonds, and so on56. It is a direct measure of electron sharing that reflects covalency. This supports the fact that the B-C bond has a covalent-polarized character.
ELF
In order to gain a better understanding of the nature of the new covalent chemical bonds that are forming between the carbon atom on the alkyl or aryl radical and the boron atom that is a part of the B12N12 nanocage cluster, we have further calculated the Electron Localization Function (ELF)23,57. By establishing a renormalization of the Fermi hole curvature, the ELF serves as a measure for electron pairing (localization). Values for the ELF range from zero (no electron localization) to one, with zero indicating that there is no electron localization and one indicating that there is complete electron localization (electron pairing, covalent bond).
Covalent bonding may be recognized in Fig. 8 as the maxima of ELF occurring along the bond almost halfway between the two atoms (B-C). It is evident from the ELF depicted in Figure that the bonding between the two atoms in question is of the covalent type. As seen in this figure, the presence of a red region in the center of two carbon atoms demonstrates that the B–N bond on the nanocluster is actually of the covalent nature. These results are supported also through the analysis of the bond order: Mayer Bond order58,59, Fuzzy Bond Order (FBO)60 and Laplacian Bond Order (LBO)61 between the bonded atoms as presented in Table 4.
The electron density is split in such a way by the Mayer bond order that the degree of bonding can be determined in a straightforward manner. According to this order, the value assigned to a completely fulfilled double bond is 2, the value assigned to a triple bond is 3, and so on62. The bond order values are rather near to one, showing once more the presence of covalent single bonds between the B-C atoms of the grafted moieties, as opposed to multiple bonds. In order to be independent of the calculation methods (the usage of basis set), the FBO were also computed; typically, the magnitude of the FBO is similar to the Mayer bond order, particularly for low-polar bonds, but is considerably more stable with regard to the change in basis set. LBO presented a new concept of covalent bond order based on the Laplacian of electron density ∇2ρ in fuzzy overlap space61. LBO was shown to be logical and helpful by applying it to a wide range of compounds and comparing it to various current bond order classifications. It is demonstrated that LBO has a direct relationship with bond polarity, bond dissociation energy, and bond vibrational frequency. LBO has a low computational cost and is indifferent to the computing level utilized to create electron density. The numbers corroborate the atom bonding order; the calculated values are quite near to Mayer bond orders.
Electron density difference (EDD) analysis
When a chemical bond is formed, an important rearrangement of the electrons in the system takes place, which results in polarization and the transfer of charge. In particular, the creation of a covalent bond must be accompanied by the phenomena of electrons congregating in the bonding area. This may be shown by plotting an electron density difference (EDD) plot, which is one of the most effective ways to do so.
In the Fig. 9, we can observe that the interaction includes charge transfer mostly between the C atom and the surrounding B atoms in B12N12 by referring to the charge density difference diagrams of aryl or alkyl groups and B12N12 cluster. EDD show that there is a concentration of electron density (red color in map) between C and B atom supporting the bond formation. Additionally, the formation of a chemical connection between two distinct fragments must result in measurable charge transfer (CT). CT may be calculated as the difference between the fragment charge in the actual system and the net charge of the fragment in its isolated condition. The fragment charge is defined as the total of the charges of the fragment's atoms37. It's worth noting that the amount of charge regarding the charge fragments of the various bound groups differs, for:–C6H13 (q = − 0.0237),–Ph (q = 0.091) and –PhNO2 (q = − 0.151)—this is probably what influences the BDE values and the Bond orders for the B-C atoms.
Conclusion
We used the DFT calculations to investigate the grafting of aryl and alkyl radicals on B12N12 nanocages in this work. The computed BDEs for the grafted groups were greater than 60 kcal/mol, indicating the formation of a stable interface. After grafting, B12N12 exhibits significant changes in its electronic properties. The dipole moment of the grafted system increases as well. The HOMO/LUMO gap in bare B12N12 is greater than in other grafted systems. Furthermore, the partial density of states and electronic energy level were computed to demonstrate the influence of the grafted moieties on the structure of B12N12. The ELF, QTAIM, EDD, CT and bond order all clearly demonstrate that the generated bond between the B atom of the B12N12 and the grafted aryl or alkyl groups is polarized covalent.
Data availability
The datasets generated during and/or analysed during the current study are available from the corresponding author on reasonable request.
References
Jiang, X. F. et al. Recent progress on fabrications and applications of boron nitride nanomaterials: A review. J. Mater. Sci. Technol. 31, 589–598 (2015).
Caldwell, J. D. et al. Photonics with hexagonal boron nitride. Nat. Rev. Mater. 4, 552–567 (2019).
Li, J. L., He, T. & Yang, G. W. An all-purpose building block: B12N12 fullerene. Nanoscale 4, 1665 (2012).
Escobar, J. C., Villanueva, M. S., Hernández, A. B., Cortés-Arriagada, D. & Anota, E. C. Interactions of B12N12 fullerenes on graphene and boron nitride nanosheets: A DFT study. J. Mol. Graph. Model. 86, 27–34 (2019).
Lin, Y. & Connell, J. W. Advances in 2D boron nitride nanostructures: Nanosheets, nanoribbons, nanomeshes, and hybrids with graphene. Nanoscale 4, 6908–6939 (2012).
Pino-Rios, R., Chigo-Anota, E., Shakerzadeh, E. & Cárdenas-Jirón, G. B12N12 cluster as a collector of noble gases: A quantum chemical study. Physica E 115, 113697 (2020).
Weng, Q. et al. Highly water-soluble, porous, and biocompatible boron nitrides for anticancer drug delivery. ACS Nano 8, 6123–6130 (2014).
Matxain, J. M. et al. New solids based on B12N12 fullerenes. J. Phys. Chem. C 111, 13354–13360 (2007).
Kaviani, S., Shahab, S. & Sheikhi, M. Adsorption of alprazolam drug on the B12N12 and Al12N12 nano-cages for biological applications: A DFT study. Physica E 126, 114473 (2021).
Kaviani, S., Shahab, S., Sheikhi, M., Potkin, V. & Zhou, H. A DFT study of Se-decorated B12N12 nanocluster as a possible drug delivery system for ciclopirox. Comput. Theor. Chem. 1201, 113246 (2021).
Sheikhi, M., Kaviani, S., Azarakhshi, F. & Shahab, S. Superalkali X3O (X = Li, Na, K) doped B12N12 nano-cages as a new drug delivery platform for chlormethine: A DFT approach. Comput. Theor. Chem. 1212, 113722 (2022).
Kaviani, S. & Izadyar, M. ZIF-8 metal-organic framework conjugated to pristine and doped B12N12 nanoclusters as a new hybrid nanomaterial for detection of amphetamine. Inorg. Chem. Commun. 135, 109119 (2022).
Soltani, A. & Javan, M. B. Carbon monoxide interactions with pure and doped B11XN12 (X = Mg, Ge, Ga) nano-clusters: A theoretical study. RSC Adv. 5, 90621–90631 (2015).
Abdolahi, N. et al. Adsorption of celecoxib on B12N12 fullerene: Spectroscopic and DFT/TD-DFT study. Spectrochim. Acta Part A 204, 348–353 (2018).
Javan, M. B., Soltani, A., Azmoodeh, Z., Abdolahi, N. & Gholami, N. A DFT study on the interaction between 5-fluorouracil and B12N12 nanocluster. RSC Adv. 6, 104513–104521 (2016).
Pinson, J. & Podvorica, F. Attachment of organic layers to conductive or semiconductive surfaces by reduction of diazonium salts. Chem. Soc. Rev. 34, 429–439 (2005).
Assresahegn, B. D., Brousse, T. & Bélanger, D. Advances on the use of diazonium chemistry for functionalization of materials used in energy storage systems. Carbon N. Y. 92, 362–381 (2015).
Berisha, A., Chehimi, M. M., Pinson, J. & Podvorica, F. I. Electrode surface modification using diazonium salts. In Electroanalytical Chemistry (ed. Press, C. R. C.) 115–224 (2015).
Jiang, D. E., Sumpter, B. G. & Dai, S. How do aryl groups attach to a graphene sheet?. J. Phys. Chem. B 110, 23628–23632 (2006).
Paulus, G. L. C., Wang, Q. H. & Strano, M. S. Covalent electron transfer chemistry of graphene with diazonium salts. Acc. Chem. Res. 46, 160–170 (2013).
Berisha, A. Interactions between the aryldiazonium cations and graphene oxide: A DFT study. J. Chem. 2019, 1–5 (2019).
Berisha, A. The influence of the grafted aryl groups on the solvation properties of the graphyne and graphdiyne: A MD study. Open Chem. 17, 703–710 (2019).
Berisha, A. First principles details into the grafting of aryl radicals onto the free-standing and borophene/Ag(1 1 1) surfaces. Chem. Phys. 544, 111124 (2021).
Liu, Y., Chen, M. & Yang, S. Chemical functionalization of 2D black phosphorus. InfoMat 3, 231–251 (2021).
Berisha, A. et al. Alkyl-modified gold surfaces: Characterization of the Au-C bond. Langmuir 34, 11264–11271 (2018).
Barosi, A. et al. Efficient construction of a redox responsive thin polymer layer on glassy carbon and gold surfaces for voltage-gated delivery applications. Mater. Adv. https://doi.org/10.1039/d1ma00022e (2021).
Bouša, D. et al. Mesomeric effects of graphene modified with diazonium salts: Substituent type and position influence its properties. Chemistry 21, 17728–17738 (2015).
Berisha, A. & Seydou, M. In Grafting of Aryl Radicals onto Surfaces—A DFT Study: Aryl Diazonium Salts and Related Compounds: Surface Chemistry and Applications (eds Chehimi, M. M. et al.) 121–135 (Springer International Publishing, 2022).
Korivand, M. & Zamani, M. Surface modification of graphene by coupling with electron deficient radicals. J. Solid State Chem. 294, 121851 (2021).
Berisha, A., Combellas, C., Kanoufi, F., Pinson, J. & Podvorica, F. I. Physisorption vs grafting of aryldiazonium salts onto iron: A corrosion study. Electrochim. Acta 56, 10762–10766 (2011).
Perdew, J. P., Burke, K. & Ernzerhof, M. Generalized gradient approximation made simple. Phys. Rev. Lett. 77, 3865–3868 (1996).
Inada, Y. & Orita, H. Efficiency of numerical basis sets for predicting the binding energies of hydrogen bonded complexes: Evidence of small basis set superposition error compared to Gaussian basis sets. J. Comput. Chem. 29, 225–232 (2008).
Tkatchenko, A. & Scheffler, M. Accurate molecular van der Waals interactions from ground-state electron density and free-atom reference data. Phys. Rev. Lett. 102, 073005 (2009).
Weigend, F. & Ahlrichs, R. Balanced basis sets of split valence, triple zeta valence and quadruple zeta valence quality for H to Rn: Design and assessment of accuracy. Phys. Chem. Chem. Phys. 7, 3297–3305 (2005).
Smith, D. G. A., Burns, L. A., Patkowski, K. & Sherrill, C. D. Revised damping parameters for the D3 dispersion correction to density functional theory. J. Phys. Chem. Lett. 7, 2197–2203 (2016).
Mahdavian, L. A study of B12N12 nanocage as potential sensor for detection and reduction of 2,3,7,8-tetrachlorodibenzodioxin. Russ. J. Appl. Chem. 89, 1528–1535 (2016).
Lu, T. & Chen, F. Multiwfn: A multifunctional wavefunction analyzer. J. Comput. Chem. 33, 580–592 (2012).
Lu, T. & Chen, Q. Realization of conceptual density functional theory and information-theoretic approach in multiwfn program. In Conceptual Density Functional Theory 631–647 (Wiley, 2022).
Humphrey, W., Dalke, A. & Schulten, K. V. M. D. Visual molecular dynamics. J. Mol. Graph. 14, 33–38 (1996).
Hussain, S. et al. Adsorption of phosgene gas on pristine and copper-decorated B12N12 nanocages: A comparative DFT study. ACS Omega 5, 7641–7650 (2020).
Berisha, A. & Seydou, M. Grafting of Aryl Radicals onto Surfaces—A DFT Study 121–135 (Springer, 2022).
Venkatachar, A. C., Taylor, R. C. & Kuczkowski, R. L. Microwave spectrum, structure, quadrupole coupling constants and dipole moment of carbon monoxide-borane. J. Mol. Struct. 38, 17–23 (1977).
Haziri, V., Phal, S., Boily, J. F., Berisha, A. & Tesfalidet, S. Oxygen interactions with covalently grafted 2D nanometric carboxyphenyl thin films: An experimental and DFT study. Coatings 12, 49 (2022).
Phal, S. et al. Covalently electrografted carboxyphenyl layers onto gold surface serving as a platform for the construction of an immunosensor for detection of methotrexate. J. Electroanal. Chem. 812, 235–243 (2018).
Barosi, A. et al. Efficient construction of a redox responsive thin polymer layer on glassy carbon and gold surfaces for voltage-gated delivery applications. Mater. Adv. 2, 2358–2365 (2021).
Phal, S., Nguyễn, H., Berisha, A. & Tesfalidet, S. In situ Bi/carboxyphenyl-modified glassy carbon electrode as a sensor platform for detection of Cd2+ and Pb2+ using square wave anodic stripping voltammetry. Sens. Bio-Sens. Res. 34, 100455 (2021).
Li, S. S. Scattering mechanisms and carrier mobilities in semiconductors. Semicond. Phys. Electron. https://doi.org/10.1007/0-387-37766-2_8 (2006).
Petrone, A., Goings, J. J. & Li, X. Quantum confinement effects on optical transitions in nanodiamonds containing nitrogen vacancies. Phys. Rev. B 94, 165402 (2016).
Hamam, K. J. & Alomari, M. I. A study of the optical band gap of zinc phthalocyanine nanoparticles using UV–Vis spectroscopy and DFT function. Appl. Nanosci. 7, 261–268 (2017).
Bredas, J. L. Mind the gap!. Mater. Horizons 1, 17–19 (2013).
Bader, R. F. W. Atoms in molecules. Acc. Chem. Res. 18, 9–15 (1985).
Matta, C. F. & Boyd, R. J. The Quantum Theory of Atoms in Molecules (Wiley, 2007).
Farrugia, L. J., Evans, C., Lentz, D. & Roemer, M. The QTAIM approach to chemical bonding between transition metals and carbocyclic rings: A Combined experimental and theoretical study of (η5-C5H5)Mn(CO)3, (η6-C6H6)Cr(CO)3, and (E)-{(η5-C5H4)CF=CF(η5- C5H4)}(η5-C. J. Am. Chem. Soc. 131, 1251–1258 (2009).
Bianchi, R., Gervasio, G. & Marabello, D. Experimental electron density analysis of Mn2(CO)10: Metal-metal and metal-ligand bond characterization. Inorg. Chem. 39, 2360–2366 (2000).
Nakanishi, W. & Hayashi, S. Role of dG/dw and dV/dw in AIM analysis: An approach to the nature of weak to strong interactions. J. Phys. Chem. A 117, 1795–1803 (2013).
Hilal, R., Aziz, S. G., Alyoubi, A. O. & Elroby, S. Quantum topology of the charge density of chemical bonds. QTAIM analysis of the C-Br and O-Br bonds. Procedia Comput. Sci. 51, 1872–1877 (2015).
Savin, A., Nesper, R., Wengert, S. & Fässler, T. F. ELF: The electron localization function. Angew. Chemie Int. Ed. English 36, 1808–1832 (1997).
Mayer, I. Bond order and valence indices: A personal account. J. Comput. Chem. 28, 204–221 (2007).
Stevenson, J. et al. Mayer bond order as a metric of complexation effectiveness in lead halide perovskite solutions. Chem. Mater. 29, 2435–2444 (2017).
Mayer, I. & Salvador, P. Overlap populations, bond orders and valences for ‘fuzzy’ atoms. Chem. Phys. Lett. 383, 368–375 (2004).
Lu, T. & Chen, F. Bond order analysis based on the laplacian of electron density in fuzzy overlap space. J. Phys. Chem. A 117, 3100–3108 (2013).
Bridgeman, A. J., Cavigliasso, G., Ireland, L. R. & Rothery, J. The Mayer bond order as a tool in inorganic chemistry. J. Chem. Soc. Dalt. Trans. 14, 2095–2108. https://doi.org/10.1039/B102094N (2001).
Author information
Authors and Affiliations
Contributions
A.B. did the work and wrote the manuscript.
Corresponding author
Ethics declarations
Competing interests
The author declares no competing interests.
Additional information
Publisher's note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary Information
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Berisha, A. Unraveling the electronic influence and nature of covalent bonding of aryl and alkyl radicals on the B12N12 nanocage cluster. Sci Rep 13, 752 (2023). https://doi.org/10.1038/s41598-023-28055-8
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41598-023-28055-8
- Springer Nature Limited